Mykola Kvach ff35a247f1 drivers: pinctrl: pfc_rcar: add dummy IPSR flag to pinctrl driver ... Add a dummy IPSR flag to the RCar PFC driver. It is necessary to ensure that the driver sets the 'peripheral' bit (the driver resets this bit during the first call of 'pfc_rcar_set_gpsr') for a pin that doesn't have a pin function defined in IPSR, but always acts as a 'peripheral', for example, the MMC pins on the Spider board. Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>		2024-03-20 15:42:45 +01:00
..
renesas	drivers: pinctrl: pfc_rcar: add dummy IPSR flag to pinctrl driver	2024-03-20 15:42:45 +01:00
CMakeLists.txt	drivers: pinctrl: initial device driver for ENE KB1200	2024-03-15 09:39:48 +00:00
common.c
Kconfig	drivers: pinctrl: initial device driver for ENE KB1200	2024-03-15 09:39:48 +00:00
Kconfig.ambiq
Kconfig.b91
Kconfig.cc13xx_cc26xx
Kconfig.emsdp
Kconfig.ene	drivers: pinctrl: initial device driver for ENE KB1200	2024-03-15 09:39:48 +00:00
Kconfig.eos_s3
Kconfig.esp32
Kconfig.gd32
Kconfig.gecko
Kconfig.ifx_cat1
Kconfig.imx	soc: xtensa: imx8: Add pinctrl support	2023-11-09 18:21:05 +01:00
Kconfig.it8xxx2
Kconfig.kinetis
Kconfig.lpc_iocon
Kconfig.npcx
Kconfig.nrf
Kconfig.numaker
Kconfig.numicro
Kconfig.nxp_s32
Kconfig.rpi_pico
Kconfig.rv32m1
Kconfig.rw	drivers: pinctrl: Add RW pinctrl driver	2024-03-13 16:45:13 +00:00
Kconfig.sam
Kconfig.sam0
Kconfig.sifive
Kconfig.stm32
Kconfig.ti_cc32xx
Kconfig.ti_k3
Kconfig.xec
Kconfig.xlnx
Kconfig.xmc4xxx
Kconfig.zynqmp	drivers: pinctrl: Add ZynqMP / Mercury XU pinctrl support	2024-01-26 12:47:11 +01:00
pinctrl_ambiq_apollo4.c
pinctrl_b91.c
pinctrl_cc13xx_cc26xx.c
pinctrl_emsdp.c
pinctrl_ene_kb1200.c	drivers: pinctrl: initial device driver for ENE KB1200	2024-03-15 09:39:48 +00:00
pinctrl_eos_s3.c
pinctrl_esp32.c
pinctrl_gd32_af.c
pinctrl_gd32_afio.c
pinctrl_gecko.c	hwmv2: Introduce Hardware model version 2 and convert devices	2024-03-02 16:56:33 -05:00
pinctrl_ifx_cat1.c
pinctrl_imx_scu.c	soc: xtensa: imx8: Add pinctrl support	2023-11-09 18:21:05 +01:00
pinctrl_imx.c	hwmv2: Introduce Hardware model version 2 and convert devices	2024-03-02 16:56:33 -05:00
pinctrl_ite_it8xxx2.c	ITE: drivers/pinctrl: Distinguish between func3-gcr and func3-ext settings	2024-01-26 14:21:34 -05:00
pinctrl_kinetis.c	drivers: pinctrl: Add support for more ports	2024-03-13 22:38:46 +00:00
pinctrl_lpc_iocon.c
pinctrl_mchp_xec.c
pinctrl_npcx.c	soc: arm: npcx: move soc-specific register definitions to soc.h	2023-11-09 10:20:39 +00:00
pinctrl_nrf.c	drivers: pinctrl_nrf: Set clockpin bitfield when necessary	2024-03-18 19:11:36 +00:00
pinctrl_numaker.c
pinctrl_numicro.c
pinctrl_nxp_s32.c
pinctrl_rpi_pico.c
pinctrl_rv32m1.c
pinctrl_rw_iomux.c	drivers: pinctrl: Add RW pinctrl driver	2024-03-13 16:45:13 +00:00
pinctrl_sam0.c
pinctrl_sam.c
pinctrl_sifive.c	drivers: pinctrl: sifive: use DT ngpios property	2024-01-19 15:13:53 +00:00
pinctrl_stm32.c
pinctrl_ti_cc32xx.c
pinctrl_ti_k3.c
pinctrl_xlnx_zynq.c
pinctrl_xlnx_zynqmp.c	drivers: pinctrl: Add ZynqMP / Mercury XU pinctrl support	2024-01-26 12:47:11 +01:00
pinctrl_xmc4xxx.c