0cae816b27
Many boards have similar code to configure the USB and CDC ACM UART that they want to use as a logging or shell backend. Some of them have an incorrect or incomplete configuration. These boards do not have a built-in debug adapter, but a SoC with a USB device controller and a bootloader with USB device support. Introduce common CDC ACM UART configuration that these boards should use for logging or shell backend to avoid duplicate or incorrect configuration. Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no> |
||
|---|---|---|
| .. | ||
| usb | ||
| blackmagicprobe.board.cmake | ||
| bossac.board.cmake | ||
| canopen.board.cmake | ||
| dfu-util.board.cmake | ||
| esp32.board.cmake | ||
| ezflashcli.board.cmake | ||
| gd32isp.board.cmake | ||
| jlink.board.cmake | ||
| linkserver.board.cmake | ||
| mdb-hw.board.cmake | ||
| mdb-nsim.board.cmake | ||
| minichlink.board.cmake | ||
| misc.board.cmake | ||
| nios2.board.cmake | ||
| nrfjprog.board.cmake | ||
| nrfutil.board.cmake | ||
| nulink.board.cmake | ||
| nxp_s32dbg.board.cmake | ||
| openocd-nrf5.board.cmake | ||
| openocd.board.cmake | ||
| probe-rs.board.cmake | ||
| pyocd.board.cmake | ||
| renode_robot.board.cmake | ||
| renode.board.cmake | ||
| silabs_commander.board.cmake | ||
| simics.board.cmake | ||
| spi_burn.board.cmake | ||
| stm32cubeprogrammer.board.cmake | ||
| stm32flash.board.cmake | ||
| stub.dts | ||
| teensy.board.cmake | ||
| trace32.board.cmake | ||
| uf2.board.cmake | ||
| xsdb.board.cmake | ||