19b7eec08c
This commit enable erase command for max32xxx/max78xxx boards. Erase command shall be passed to west flash as below west flash --erase Console output will like: ...... [max32xxx.cpu] halted due to breakpoint, current mode: Thread xPSR: 0x01000000 pc: 0x000001b4 msp: 0x20004000 max32xxx mass erase complete wrote XXXX bytes from file YYYY Enable debug to connect in low-power mode shutdown command invoked Signed-off-by: Sadik Ozer <sadik.ozer@analog.com> |
||
|---|---|---|
| .. | ||
| usb | ||
| blackmagicprobe.board.cmake | ||
| bossac.board.cmake | ||
| canopen.board.cmake | ||
| dfu-util.board.cmake | ||
| ecpprog.board.cmake | ||
| esp32.board.cmake | ||
| ezflashcli.board.cmake | ||
| gd32isp.board.cmake | ||
| jlink.board.cmake | ||
| linkserver.board.cmake | ||
| mdb-hw.board.cmake | ||
| mdb-nsim.board.cmake | ||
| minichlink.board.cmake | ||
| misc.board.cmake | ||
| nios2.board.cmake | ||
| nrfjprog.board.cmake | ||
| nrfutil.board.cmake | ||
| nulink.board.cmake | ||
| nxp_s32dbg.board.cmake | ||
| openocd-adi-max32.boards.cmake | ||
| openocd-nrf5.board.cmake | ||
| openocd-stm32.board.cmake | ||
| openocd.board.cmake | ||
| probe-rs.board.cmake | ||
| pyocd.board.cmake | ||
| renode_robot.board.cmake | ||
| renode.board.cmake | ||
| silabs_commander.board.cmake | ||
| simics.board.cmake | ||
| spi_burn.board.cmake | ||
| stm32cubeprogrammer.board.cmake | ||
| stm32flash.board.cmake | ||
| stub.dts | ||
| teensy.board.cmake | ||
| trace32.board.cmake | ||
| uf2.board.cmake | ||
| xsdb.board.cmake | ||