/*
 * Copyright (c) 2012-2014 Wind River Systems, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * @file
 * @brief Test nanokernel stack APIs
 *
 * This module tests three basic scenarios with the usage of the following
 * STACK routines:
 *
 * nano_fiber_stack_pop, nano_fiber_stack_push
 * nano_task_stack_pop, nano_task_stack_push
 * nano_isr_stack_pop, nano_isr_stack_push
 *
 * Scenario #1
 * Task enters items into a queue, starts the fiber and waits for a semaphore.
 * Fiber extracts all items from the queue and enters some items back into
 * the queue.  Fiber gives the semaphore for task to continue.  Once the
 * control is returned back to task, task extracts all items from the queue.
 *
 * Scenario #2
 * Task enters an item into queue2, starts a fiber and extract an item from
 * queue1 once the item is there.  The fiber will extract an item from queue2
 * once the item is there and and enter an item to queue1.  The flow of control
 * goes from task to fiber and so forth.
 *
 * Scenario #3
 * Tests the ISR interfaces.  Fiber2 pops an item from queue1 in ISR context.
 * It then enters four items into the queue and finishes execution.  Control
 * is returned back to function testTaskStackPopW which also finished it's
 * execution and returned to main.  Finally function testIsrStackFromTask is
 * run and it popped all data from queue1, push and pop one last item to the
 * queue. All these are run in ISR context.
 */

#include <tc_util.h>
#include <arch/cpu.h>
#include <irq_offload.h>

#include <util_test_common.h>

#define STACKSIZE               2048
#define NUM_STACK_ELEMENT       4
#define STARTNUM                1       /* Used to compute data to put in the stack */
#define MULTIPLIER              100     /* Used to compute data to put in the stack */
#define MYNUMBER                50      /* Used to compute data to put in the stack */
#define INVALID_DATA            0       /* Invalid data on stack */

#define TCERR1(count)  TC_ERROR("Didn't get back correct data, count %d\n", count)
#define TCERR2         TC_ERROR("Didn't get back correct data\n")
#define TCERR3         TC_ERROR("The stack should be empty!\n")

typedef struct {
	struct nano_stack *stack_ptr;    /* STACK */
	uint32_t           data;         /* data to add */
} ISR_STACK_INFO;


char __stack fiberStack1[STACKSIZE];
char __stack fiberStack2[STACKSIZE];
char __stack fiberStack3[STACKSIZE];

struct nano_timer timer;
struct nano_stack nanoStackObj;
struct nano_stack nanoStackObj2;
struct nano_sem   nanoSemObj; /* Used for transferring control between
                               * main and fiber1
                               */

uint32_t myData[NUM_STACK_ELEMENT];
uint32_t myIsrData[NUM_STACK_ELEMENT];  /* Data used for testing
                                         * nano_isr_stack_push and
                                         * nanoIsrStatckPop interfaces
                                         */
uint32_t stack1[NUM_STACK_ELEMENT];
uint32_t stack2[NUM_STACK_ELEMENT];

void *timerData[1];
int retCode = TC_PASS;

static ISR_STACK_INFO  isrStackInfo = {&nanoStackObj, 0};

void initData(void);
void fiber1(void);
void fiber2(void);
void initNanoObjects(void);
void testFiberStackPopW(void);
void testTaskStackPopW(void);
/* Isr related functions */
void isr_stack_push(void *parameter);
void isr_stack_pop(void *parameter);
void testIsrStackFromFiber(void);
void testIsrStackFromTask(void);


/**
 *
 * initData
 *
 * Initialize myData and myIsrData arrays.
 *
 * @return none
 */

void initData(void)
{
	for (int i=0; i< NUM_STACK_ELEMENT; i++) {
		myData[i] = (STARTNUM + i) * MULTIPLIER;
		myIsrData[i] = myData[i] + MYNUMBER;
	}
} /* initData */

/**
 *
 * @brief Add an item to a STACK
 *
 * This routine is the ISR handler for _trigger_nano_isr_stack_push().  It adds
 * an item to the STACK in the context of an ISR.
 *
 * @param parameter    pointer to ISR handler parameter
 *
 * @return N/A
 */

void isr_stack_push(void *parameter)
{
	ISR_STACK_INFO *pInfo = (ISR_STACK_INFO *) parameter;

	nano_isr_stack_push(pInfo->stack_ptr, pInfo->data);

}  /* isr_stack_push */

static void _trigger_nano_isr_stack_push(void)
{
	irq_offload(isr_stack_push, &isrStackInfo);
}

/**
 *
 * @brief Get an item from a STACK
 *
 * This routine is the ISR handler for _trigger_nano_isr_stack_pop().  It gets
 * an item from the STACK in the context of an ISR.  If the queue is empty,
 * it sets data to INVALID_DATA.
 *
 * @param parameter    pointer to ISR handler parameter
 *
 * @return N/A
 */

void isr_stack_pop(void *parameter)
{
	ISR_STACK_INFO *pInfo = (ISR_STACK_INFO *) parameter;

	if (nano_isr_stack_pop(pInfo->stack_ptr, &(pInfo->data), TICKS_NONE) == 0) {
		/* the stack is empty, set data to INVALID_DATA */
		pInfo->data = INVALID_DATA;
	}

}  /* isr_stack_pop */

static void _trigger_nano_isr_stack_pop(void)
{
	irq_offload(isr_stack_pop, &isrStackInfo);
}

/**
 *
 * fiber1
 *
 * This is the fiber started from the main task.  Gets all items from
 * the STACK queue and puts four items back to the STACK queue.  Control is
 * transferred back to the main task.
 *
 * @return N/A
 */

void fiber1(void)
{
	uint32_t    data;        /* data used to put and get from the stack queue */
	int         count = 0;   /* counter */

	TC_PRINT("Test Fiber STACK Pop\n\n");
	/* Get all data */
	while (nano_fiber_stack_pop(&nanoStackObj, &data, TICKS_NONE) != 0) {
		TC_PRINT("FIBER STACK Pop: count = %d, data is %d\n", count, data);
		if ((count >= NUM_STACK_ELEMENT) || (data != myData[NUM_STACK_ELEMENT - 1 - count])) {
			TCERR1(count);
			retCode = TC_FAIL;
			return;
		}
		count++;
	}

	TC_END_RESULT(retCode);
	PRINT_LINE;

	/* Put data */
	TC_PRINT("Test Fiber STACK Push\n");
	TC_PRINT("\nFIBER STACK Put Order: ");
	for (int i=NUM_STACK_ELEMENT; i>0; i--) {
		nano_fiber_stack_push(&nanoStackObj, myData[i-1]);
		TC_PRINT(" %d,", myData[i-1]);
	}
	TC_PRINT("\n");
	PRINT_LINE;

	/* Give semaphore to allow the main task to run */
	nano_fiber_sem_give(&nanoSemObj);

} /* fiber1 */



/**
 *
 * testFiberStackPopW
 *
 * This function tests the stack push and pop wait interfaces in a fiber.
 * It gets data from nanoStackObj2 queue and puts data to nanoStackObj queue.
 *
 * @return N/A
 */

void testFiberStackPopW(void)
{
	uint32_t  data;     /* data used to put and get from the stack queue */
	int rc;

	TC_PRINT("Test Fiber STACK Pop Wait Interfaces\n\n");
	rc = nano_fiber_stack_pop(&nanoStackObj2, &data, TICKS_UNLIMITED);
	TC_PRINT("FIBER STACK Pop from queue2: %d\n", data);
	/* Verify results */
	if ((rc == 0) || (data != myData[0])) {
		retCode = TC_FAIL;
		TCERR2;
		return;
	}

	data = myData[1];
	TC_PRINT("FIBER STACK Push to queue1: %d\n", data);
	nano_fiber_stack_push(&nanoStackObj, data);

	rc = nano_fiber_stack_pop(&nanoStackObj2, &data, TICKS_UNLIMITED);
	TC_PRINT("FIBER STACK Pop from queue2: %d\n", data);
	/* Verify results */
	if ((rc == 0) || (data != myData[2])) {
		retCode = TC_FAIL;
		TCERR2;
		return;
	}

	data = myData[3];
	TC_PRINT("FIBER STACK Push to queue1: %d\n", data);
	nano_fiber_stack_push(&nanoStackObj, data);

	TC_END_RESULT(retCode);

}  /* testFiberStackPopW */

/**
 *
 * testIsrStackFromFiber
 *
 * This function tests the stack push and pop interfaces in the ISR context.
 * It is invoked from a fiber.
 *
 * We use nanoStackObj queue to push and pop data.
 *
 * @return N/A
 */

void testIsrStackFromFiber(void)
{
	uint32_t  result = INVALID_DATA;     /* data used to put and get from the stack queue */

	TC_PRINT("Test ISR STACK (invoked from Fiber)\n\n");

	/* This is data pushed by function testFiberStackPopW */
	_trigger_nano_isr_stack_pop();
	result = isrStackInfo.data;
	if (result != INVALID_DATA) {
		TC_PRINT("ISR STACK (running in fiber) Pop from queue1: %d\n", result);
		if (result != myData[3]) {
			retCode = TC_FAIL;
			TCERR2;
			return;
		}
	}

	/* Verify that the STACK is empty */
	_trigger_nano_isr_stack_pop();
	result = isrStackInfo.data;
	if (result != INVALID_DATA) {
		 TC_PRINT("Pop from queue1: %d\n", result);
		 retCode = TC_FAIL;
		 TCERR3;
		 return;
	}

	/* Put more data into STACK */
	TC_PRINT("ISR STACK (running in fiber) Push to queue1:\n");
	for (int i=0; i<NUM_STACK_ELEMENT; i++) {
		isrStackInfo.data = myIsrData[i];
		TC_PRINT("  %d, ", myIsrData[i]);
		_trigger_nano_isr_stack_push();
	}
	TC_PRINT("\n");

	/* Set variable to INVALID_DATA to ensure [data] changes */
	isrStackInfo.data = INVALID_DATA;

	TC_END_RESULT(retCode);

}  /* testIsrStackFromFiber */

/**
 *
 * testIsrStackFromTask
 *
 * This function tests the stack push and pop interfaces in the ISR context.
 * It is invoked from a task.
 *
 * We use nanoStackObj queue to push and pop data.
 *
 * @return N/A
 */

void testIsrStackFromTask(void)
{
	uint32_t  result = INVALID_DATA;     /* data used to put and get from the stack queue */
	int       count  = 0;

	TC_PRINT("Test ISR STACK (invoked from Task)\n\n");

	/* Get all data */
	_trigger_nano_isr_stack_pop();
	result = isrStackInfo.data;

	while (result != INVALID_DATA) {
		TC_PRINT("  Pop from queue1: count = %d, data is %d\n", count, result);
		if ((count >= NUM_STACK_ELEMENT) || (result != myIsrData[NUM_STACK_ELEMENT - count - 1])) {
			TCERR1(count);
			retCode = TC_FAIL;
			return;
		}  /* if */

		/* Get the next element */
		_trigger_nano_isr_stack_pop();
		result = isrStackInfo.data;
		count++;
	}  /* while */


	/* Put data into stack and get it again */
	isrStackInfo.data = myIsrData[3];
	_trigger_nano_isr_stack_push();
	isrStackInfo.data = INVALID_DATA;   /* force variable to a new value */
	/* Get data from stack */
	_trigger_nano_isr_stack_pop();
	result = isrStackInfo.data;
	/* Verify data */
	if (result != myIsrData[3]) {
		TCERR2;
		retCode = TC_FAIL;
		return;
	} else {
		TC_PRINT("\nTest ISR STACK (invoked from Task) - push %d and pop back %d\n",
				 myIsrData[3], result);
	}

	TC_END_RESULT(retCode);
}

/**
 *
 * fiber2
 *
 * This is the fiber started from the testTaskStackPopW function.
 *
 * @return N/A
 */

void fiber2(void)
{
	testFiberStackPopW();
	PRINT_LINE;
	testIsrStackFromFiber();

	TC_END_RESULT(retCode);
}


/**
 *
 * testTaskStackPopW
 *
 * This is in the task.  It puts data to nanoStackObj2 queue and gets
 * data from nanoStackObj queue.
 *
 * @return N/A
 */

void testTaskStackPopW(void)
{
	uint32_t  data;     /* data used to put and get from the stack queue */
	int rc;

	PRINT_LINE;
	TC_PRINT("Test STACK Pop Wait Interfaces\n\n");
	data = myData[0];
	TC_PRINT("TASK  STACK Push to queue2: %d\n", data);
	nano_task_stack_push(&nanoStackObj2, data);

	/* Start fiber */
	task_fiber_start(&fiberStack2[0], STACKSIZE,
					 (nano_fiber_entry_t) fiber2, 0, 0, 7, 0);

	rc = nano_task_stack_pop(&nanoStackObj, &data, TICKS_UNLIMITED);
	TC_PRINT("TASK STACK Pop from queue1: %d\n", data);
	/* Verify results */
	if ((rc == 0) || (data != myData[1])) {
		retCode = TC_FAIL;
		TCERR2;
		return;
	}

	data = myData[2];
	TC_PRINT("TASK STACK Push to queue2: %d\n", data);
	nano_task_stack_push(&nanoStackObj2, data);

	TC_END_RESULT(retCode);
}  /* testTaskStackPopW */

/**
 *
 * @brief A fiber to help test nano_task_stack_pop(TICKS_UNLIMITED)
 *
 * This fiber blocks for one second before pushing an item onto the stack.
 * The main task, which was waiting for item from the stack then unblocks.
 *
 * @return N/A
 */

void fiber3(void)
{
	nano_fiber_timer_start(&timer, SECONDS(1));
	nano_fiber_timer_test(&timer, TICKS_UNLIMITED);
	nano_fiber_stack_push(&nanoStackObj, myData[0]);
}

/**
 *
 * @brief Initialize nanokernel objects
 *
 * This routine initializes the nanokernel objects used in the STACK tests.
 *
 * @return N/A
 */

void initNanoObjects(void)
{
	nano_stack_init(&nanoStackObj,  stack1);
	nano_stack_init(&nanoStackObj2, stack2);
	nano_sem_init(&nanoSemObj);
	nano_timer_init(&timer, timerData);
} /* initNanoObjects */

/**
 *
 * @brief Entry point to STACK tests
 *
 * This is the entry point to the STACK tests.
 *
 * @return N/A
 */

void main(void)
{
	int         count = 0;  /* counter */
	uint32_t    data;       /* data used to put and get from the stack queue */
	int         rc;         /* return code */

	TC_START("Test Nanokernel STACK");

	/* Initialize data */
	initData();

	/* Initialize the queues and semaphore */
	initNanoObjects();

	/* Start fiber3 */
	task_fiber_start(&fiberStack3[0], STACKSIZE, (nano_fiber_entry_t) fiber3,
					 0, 0, 7, 0);
	/*
	 * While fiber3 blocks (for one second), wait for an item to be pushed
	 * onto the stack so that it can be popped.  This will put the nanokernel
	 * into an idle state.
	 */

	rc = nano_task_stack_pop(&nanoStackObj, &data, TICKS_UNLIMITED);
	if ((rc == 0) || (data != myData[0])) {
		TC_ERROR("nano_task_stack_pop(TICKS_UNLIMITED) expected 0x%x, but got 0x%x\n",
				 myData[0], data);
		retCode = TC_FAIL;
		goto exit;
	}

	/* Put data */
	TC_PRINT("Test Task STACK Push\n");
	TC_PRINT("\nTASK STACK Put Order: ");
	for (int i=0; i<NUM_STACK_ELEMENT; i++) {
		nano_task_stack_push(&nanoStackObj, myData[i]);
		TC_PRINT(" %d,", myData[i]);
	}
	TC_PRINT("\n");

	PRINT_LINE;

	/* Start fiber */
	task_fiber_start(&fiberStack1[0], STACKSIZE,
					 (nano_fiber_entry_t) fiber1, 0, 0, 7, 0);

	if (retCode == TC_FAIL) {
		goto exit;
	}

	/*
	 * Wait for fiber1 to complete execution. (Using a semaphore gives
	 * the fiber the freedom to do blocking-type operations if it wants to.)
	 *
	 */
	nano_task_sem_take(&nanoSemObj, TICKS_UNLIMITED);
	TC_PRINT("Test Task STACK Pop\n");

	/* Get all data */
	while (nano_task_stack_pop(&nanoStackObj, &data, TICKS_NONE) != 0) {
		TC_PRINT("TASK STACK Pop: count = %d, data is %d\n", count, data);
		if ((count >= NUM_STACK_ELEMENT) || (data != myData[count])) {
			TCERR1(count);
			retCode = TC_FAIL;
			goto exit;
		}
		count++;
	}

	/* Test Task Stack Pop Wait interfaces*/
	testTaskStackPopW();

	if (retCode == TC_FAIL) {
		goto exit;
	}

	PRINT_LINE;

	/* Test ISR interfaces */
	testIsrStackFromTask();
	PRINT_LINE;

exit:
	TC_END_RESULT(retCode);
	TC_END_REPORT(retCode);
}