The socket API was updated with mutex protection, however this
was not reflected in the documentation. Remove the obsolete note on the
thread-safety status of the socket API, to prevent confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add some details on the changes made in the device power management area
(callback simplification).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Updates wording in Coding Guidelines page to remove outdated timelines
and correct the criteria for each stage. Changes reflect that we are
in stage 1 and will not reach stage 2 until the CI for enforcing
coding guidelines has been established.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
The Zephyr 2.6 release notes, in the Bluetooth section, refers the user
to a commit message which had a couple of typos in it. Clarify this in
the very release notes.
Fixes#36692.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
BT_SECURITY_LOW and etc. were previously renamed and are no longer
valid.
The original rename is in the following commits:
1c48757d94 (New names, deprecate old)
5f2a9ba8e4 (Remove deprecated names)
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemiconductor.no>
The overview at the top of the page only listed ble and serial as
available transports. This commit adds udp to this list.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
After the Technical Steering Committee decided to approve the transition
from Slack to Discord, it is necessary to update all the documentation
to reflect this change.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix two typos in documentation, one in a sample's comment, and one in a
sample's console message. Found while learning Zephyr and exploring the
sources.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Create a new tracing option TRACING_USER that allows
the user to define certain user_sys_trace_... functions
to perform whatever work desired for tracing when
tasks are swiched in/out, during isr enter/exit, and when
cpu is idle.
This infrastructure can be useful for plugging into
locally defined tracing tools or any user-specific
debugging environment.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Support for ARM Compiler C library.
This commit add support for the ARM Compiler C libary in:
- Kconfig
- libc/armstdc
A new Kconfig symbol is added to allow a toolchain to specify if they
support linking with the minimal C library.
Also the CMake variable `TOOLCHAIN_HAS_NEWLIB` is exported to Kconfig
so that CONFIG_NEWLIB_LIBS can only be enabled if the toolchain has
newlib.
The armclang toolchain selects the CMake scatter file generator and
disables support for the LD linker template which is not supported by
armlink.
For the ARM Compiler C library, a corresponding lib/libc/armstc/ folder
with a minimal implementation to work with the ARM Compiler C library
is added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
PM_DEVICE_STATE_RESUMING and PM_DEVICE_STATE_SUSPENDING
are transitional states and are only used in device runtime. Remove it
and use device flag to keep track of a transition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added missing toolchain name to path for generic.cmake and target.cmake.
Added section explaining the need for, and the use of, the
toolchain/other.h header file.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This commit extends the `Build system integration` section in the Zephyr
modules guide with a description on how a module may append additional
values to Zephyr CMake lists.
This is useful for modules that might need to append values to the
`SYSCALL_INCLUDE_DIRS` list.
This commit is followup to the discussion found in:
https://github.com/zephyrproject-rtos/zephyr/pull/33756
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Inform that the queue has to be initialized in zeroed memory or with
the k_work_queue_init before use.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a new section in the API reference for the newly added
devicetree/pinctrl.h macros.
Amend macros.bnf in the guide to reflect the new generated macros for
getting at pinctrl information by name.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The newly added CMake installation instruction incorrectly specified
*double* colon (literal block) instead of *single* colon after its list
item.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The device pm actions (low_power or suspend) were switched. Also,
added SOFT_OFF to the suspend action.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The units for these testcase YAML fields are missing, making it
unclear how to use them. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using 3rd Party Toolchains page find out that warning message
can be moved to the top of the page.
Add Windows example in OneAPI.
Style fixing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Move this to where priorities are being discussed to keep things in
context and to have all priority types documented in 1 place.
Fixes#21648
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use 0.11.1 to build the docs. The docstrings are the same as 0.11.1a1,
so it doesn't make a difference in the output, but let's keep things
clean now that the final release is up.
Fix typos in the release notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update docs to reference CMake 3.20.0 as minimum required version.
Added Kitware APT repository to the getting started page.
Updated installation Linux download descriptions from CMake 3.15.3 to
CMake 3.21.1 as that is the version currently being installed when
using the Kitware APT repository.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Document the change in behaviour for `lora_send` and how to get back
the original behaviour.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Document devicetree compatibles which have changed recently and that
have drivers, along with how to handle them.
Recent changes to things like / and CPU nodes aren't worth mentioning
since there are no drivers for such things. I'm similarly not going to
document the vexriscv change since it seems likely that users are
getting this compatible via the DTSI file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
