Instead of always using the SPI MIPI DBI mode (type C), look up the
mipi-mode from the device tree and only set the mode to
MIPI_DBI_MODE_SPI_4WIRE as a fallback in case the property is not given.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Blanking On/Off calls should not return 0 when there is no panel
controller to forward them to, instead they should return ENOSYS to
signal to the application that they were not actually executed.
"device_is_ready" does check for null, but also for
"dev->state->initialized == false", so we need to isolate the
"dev == NULL" case.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Add the driver of diplay controller ist3931, i2c/spi
128x64 monocolor display driver. Only the i2c mode
driver of the controller is implemented and tested.
Signed-off-by: Shen Xuyang <shenxuyang@shlinyuantech.com>
Select PINCTRL subsystem by drivers which require it.
Prevent the need from enabling this symbol at board or soc level.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Implements the driver for the OLED SSD1327 controller.
This driver is based on the ssd1306 driver due to their similarities.
Only the SPI control bus is supported.
Signed-off-by: Luc BEAUFILS <luc.beaufils@savoirfairelinux.com>
errno is a reserved macro. Use ret instead.
Fixes a bug introduced with commit
bfb541ccbe.
Fixes#76751.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update `ssd1306_write_default` to take into account the `segment_offset`
property. This is needed for some displays to show the image correctly.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Necessary for supporting for EastRising 0.42 OLED display/board.
Some boards don't have external Iref set up. This is probably done in an
effort to save on component cost. This command is only documented in the
V1.1 revision of the SSD1306 datasheet.
See issue https://github.com/olikraus/u8g2/issues/1047
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Removed PM device runtime support from drivers in PD_SYS domain.
Update the rest device drivers to call pm_device_runtime_get/put()
functions when CONFIG_PM_DEVICE_RUNTIME is enabled.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
Convert galaxycore GC9X01 to MIPI DBI API. In tree boards and tests
using this display have also had their devicetrees updated to use the
new MIPI DBI SPI emulated device.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert UC81XX display to use MIPI DBI API, as this display uses a SPI
3/4 wire bus. In tree shields using this driver have also had their
devicetrees updated to use the new MIPI DBI SPI driver
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert SSD16XX display driver to use MIPI DBI API. This commit also
updates in tree board devicetrees to include the emulated MIPI DBI SPI
driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1. Add a property for panels where the RGB is displayed as BGR.
2. Add a check for 8080 8-bit mode and invert RGB and BGR for
this case.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add support for display_read API with ili9xxx controller. This
functionality is opt-in, since the required bitshifting makes the
read not very performant, and the implementation adds otherwise unused
code overhead.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert ST7789V display driver to use MIPI DBI API. This commit also
updates in tree boards to use the new devicetree syntax needed to enable
this display with the MIPI DBI API.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove unused includes and gpio pins from st7796s driver, which were
leftover from before this driver used the MIPI DBI API class.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The driver writes the scan entry mode to the display controller on each
set_window call. Multiple calls to set_window can be needed to update
a single frame buffer in the controller.
There's a performance improvement by only setting the scan mode when
the orientation is changed (set_orientation, see previous commit)
and when the profile has changed.
For the latter the scan_mode is lost on the controller
due to a software reset.
Signed-off-by: Sven Depoorter <svndepoorter@gmail.com>
I chose this approach instead of software rotation because I need it for
an ultra low power project.
Rotation in steps of 0, 90, 180, 270 degrees is done by changing
the data entry modes.
This commit removes the orientation-flipped property as it is redundant.
I made the assumption that the current driver implementation is right
about controller X/Y versus display width/height. The display controller X
parameter matches with the display height (dts) and display controller Y
parameter matches with the display width (dts). It looks like display
manufacturers choose to have it like this because a wider screen probably
makes more sense.
Tested on the reel_board with a 250x122 display (ssd1673 controller)
and a custom PCB with a 200x200 display (ssd1681 controller).
Also tested all orientations with various width/height dts overrides.
Signed-off-by: Sven Depoorter <svndepoorter@gmail.com>
The elcdif interrupt is enabled in the write function and disabled in
the IRQ handler for each new frame update. Disabling the interrupt when
no new frame needs to be sent gives the CPU the possibility to enter
low-power mode. However, when the application's frame rate
matches the LCD refresh rate, this adds additional latency.
This commit provides a config to choose between following options:
- Toggle the CUR_FRAME_DONE_IRQ_EN in the write function and in IRQ
handler for each new frame when the power mangement is a concern.
- Activate the CUR_FRAME_DONE_IRQ_EN once at the init function when
low latency is required.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Since the display port should be enabled
by default and sleep is bound to the
blanking status, PM constraints should
be acquired at initialization.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should optimize the way the device is allowed
to enter the suspended state. Instead of returning a PM
error code to abort the PM process, the standby power state
is constrained as long as the device is not allowed to enter
suspension. With that approach, acquiring PD_SYS is not needed
when in PM device runtime mode.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Convert the ST7735R display to use the MIPI DBI API. Boards and overlays
using this display are also updated.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit should add all the functionality needed for the DISPLAY
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Add additional documentation and warnings around PXP usage. PXP rotation
is only intended to be used when framebuffers passed to the eLCDIF
display driver are equal in size to the screen.
Moreover, PXP rotation is flipped versus LVGL rotation. So a LVGL
rotation of 90 degrees requires the PXP to be set to rotate 270 degrees
to function as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Although not documented in the HX8394 datasheet, it seems that the
display fails to initialize if MIPI HS mode is used to send
configuration commands. Therefore, we must make sure all initialization
commands are sent with the MIPI_DSI_MSG_USE_LPM flag set.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The asserts and validation code were incorrectly mixing pitch and
width. These incorrect checks were preventing rendering code from
re-using a smaller section of a buffer allocated to fit the full
screen. We expect to be able to update a portion of the display from a
portion of the buffer, in which case pitch must remain the screen
width. Expecting x + pitch to be smaller than the screen width is
incorrect.
Signed-off-by: Nathan Collins <nathan.collins@kdab.com>
For historical reasons, inversion mode is enabled by default in the
current implementation. This commit introduces an `inversion-off`
boolean DTS property, allowing it to be disabled if necessary.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Add driver for ST7796s display. This is a MIPI DBI display controller,
with a frame memory of 320x480x18 pixels. Support for 4 wire SPI mode is
implemented using the MIPI DBI API.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For now DSI settings are hard-coded for the specific
LCD module used on the STM32H747I Discovery board
Signed-off-by: Erik Andersson <erian747@gmail.com>
Exhibit Renesas LCD controller's driver implementation. The driver
is intended to employ the controller in the continuous mode so
it can drive display panels in the parallel RGB mode.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Implement the set_format API so that applications can change format
at runtime instead of using the predefined one in the device tree.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add support for ARGB8888 pixel format as the camera pipeline on i.MX
RT11xx could output images in this format
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
- Removed unused variables from the data struct
- Set all members of capability struct in `ssd1306_get_capabilities`
instead of zeroing it. This has the same effect but saves some bytes.
- Removed empty log
Signed-off-by: Greter Raffael <rgreter@baumer.com>
This allows to invert the display at runtime using the function
`ssd1306_set_pixel_format`. The current format is stored in the data
struct.
Also adjusted `ssd1306_get_capabilities` to return both supported
formats and the current one.
From the ssd1306 doc: 'In normal display a RAM data of 1 indicates an
"ON" pixel while in inverse display a RAM data of 0 indicates an "ON"
pixel.' Thus `PIXEL_FORMAT_MONO01 == SSD1306_SET_NORMAL_DISPLAY`.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
Drop a bunch of display functions that only return "not supported", the
display API already handles these by checking for NULL API function
pointer.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Display is not working on STM32F429i-DISC1 board because
display_blanking_off() needs to be sent to ILI9341 device, but it's sent
to LTDC instead which does not implement it.
This patch adds a LTDC DT property that provides the pHandle of the
display's own controller so that display_blanking_off/on are forwarded to
it when they are called by an application.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
Check the return code of mipi_dbi_reset, and do not delay for the reset
wait time unless the mipi controller has issued a hardware reset to the
display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix usage of MIPI buffer descriptor in ili9xxx driver. Previously, the
buffer descriptor size was being set to display buffer size. For cases
where the write height/width was not equal to the size of the buffer, this
resulted in additional data being written that was not needed. To
resolve this, calculate the mipi descriptor buffer size in the driver
Also, remove the unconditional setting of mipi_desc.height, as this
would override the previous (correct) setting.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert ili9xxx display drivers to use MIPI DBI API. Due to the fact
this change requires a new devicetree structure for the display driver
to build, required devicetree changes are also included in this commit
for all boards and shields defining an instance of an ili9xxx display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
