Commit 87719828ac introduced FSR definitions
for ARMv7-A/R; however, the value 16 which is documented in the ARM[1] as
a "TLB Conflict Abort", was introduced as "TLB Conflict Fault" instead and
described as a "Table Conflict Fault".
Update all affected files to use the ARM's naming for this error instead.
[1] Architecture Reference Manual (Document ID: ARM DDI 0406C.d)
"ARM Architecture Reference Manual for ARMv7-A and ARMv7-R Edition"
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
What is the change?
Switch to module CMSIS_6 for Cortex-M while continuing to use
cmsis module (version 5.9.0) for Cortex-A/R.
Why do we need this change?
The current cmsis module consists of:
- Cortex-M support from upstream cmsis 5.9.0
- Cortex-A/R support which was not upstreamed to CMSIS
Upstream cmsis 5.9 was deprecated so we should be using CMSIS_6 however,
it seems due to lack of Cortex-A/R support in upstream and other reasons,
this was pushed back.
While upstreaming Cortex-A/R support to CMSIS_6 could take its time,
this shouldn't stop Cortex-M to start using CMSIS_6.
Also, if we do not use CMSIS_6 for Cortex-M then using the
newer GCC 14.2 toolchain will return below compiler error:
```
zephyrproject/modules/hal/cmsis/CMSIS/Core/Include/core_cm85.h:4406:10:
fatal error: pac_armv81.h: No such file or directory
4406 | #include "pac_armv81.h"
```
Using CMSIS_6 for Cortex-M will fix this.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add support for processing the Fault Status Registers and recoverable
data abort for the cortex A7.
Based on Cortex-A7 MPCore Technical Reference Manual (ARM DDI 0406).
(see https://developer.arm.com/documentation/ddi0406)
Signed-off-by: Julien Racki <julien.racki@st.com>
What is changed?
Use CMSIS SystemCoreClock via a dedicated flag instead of using
soc flags.
Why do we need this change?
This change is part of cleaning soc specific code out of arch folder.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Enable Cortex R8 support, similar to Cortex-R5.
Signed-off-by: Krzysztof Sychla <ksychla@antmicro.com>
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
Add initial support for the Cortex-M85 Core which is an implementation
of the Armv8.1-M mainline architecture.
The support is based on the Cortex-M55 support that already exists in
Zephyr.
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
We follow the path of the header to define the guard, aarch32 was
removed some time ago and the guards still had AARCH32 in them, just
remove it and keep the guard consistent and short.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change adds checks to validate consistency between Zephyr’s Kconfig
settings and cmsis configuration defined in SiP’s sdk provided headers.
This change also introduces a config to enable cmsis’ own checks which
emits warnings if a parameter relies on auto-populated default values.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Kconfig parameters, header’s default & silicon vendor’s SDK configuration
for CMSIS Core, must be consistent. Depending on the inclusion order of
the headers, this is currently not always the case.
This change introduces consistency checks & enusers defaults match their
Kconfig settings.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
CMSIS uses an external KConfig so sourcing the KConfig is uncessary. This
also adds a comment if it is not available.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This adds the cmsis-nn module since it moved to its own realm.
This also adds a kconfig for the long short-term memory.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use CMSIS-DSP from its new realm. This also changes change how you
initialize FFT tables as well to use arm_cfft_init_64_f32 if you
know the FFT size in advance rather than the generic initialization
arm_cfft_init_f32.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move CMSIS module Kconfig options to a folder, in preparation for CMSIS
core header creation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
