Add specific binding for stm32f100 pll which differs from existing
stm32f1 and stm32f105 specific pll binding.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This clarification makes Zephyr's LED brightness API match the
behavior that both the Android lights HAL and Linux's userspace LED
drivers expose.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The i2s_config structure passed to the i2s_configure() function is
not supposed to be modified by the driver. Similarly, the structure
returned by the i2s_config_get() function is not supposed to be
modified outside the driver.
Decorate the pointers to those structures with the const qualifier
and correct one driver that actually modified the structure passed
to i2s_configure().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Introduce a new enumeration value that allows setting configuration
and triggering commands for both I2S streams simultaneously.
Such possibility is especially important on hardware where the streams
can be only enabled/disabled (but not started/stopped) independently,
like it is in nRF SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Certain uarts support collision detection. This is mainly used in
half-duplex scenarios, like RS-485 and raises an error when bits
output on the TX line do not match the bits received on the RX line.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Add support for STM32L0 clocks bindings.
Also, add a small tweak to SYSCLK selection to factorize some lines.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to ensure backward compatibility, use the dts config
only if nodes have prop "clocks".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Extend the number of available initializers for the `struct
gpio_dt_spec` with:
- GPIO_DT_SPEC_GET_BY_IDX(): allows initialization from a specific index
- GPIO_DT_SPEC_INST_GET_BY_IDX(): instance version of
GPIO_DT_SPEC_GET_BY_IDX()
- GPIO_DT_SPEC_INST_GET(): instance version of GPIO_DT_SPEC_GET()
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
To allow transition to device tree based clock configuration on
stm32 targets, rework clock_control driver to use intermediate
STM32_ macros initially defined as the equivalent Kconfig macros
for now.
Propagate the change in all code using these macros.
The reason to introduce these new macros instead of configuring
Kconfig flags using dt kconfigfunctions is that we'll need
to be able to inform users that Kconfig flags are deprecated
once the whole family conversion is done, to encourage
out of tree users to adopt this new configuration scheme.
Note: For now STM32H7 series and code is excluded.
This is the same for some series specific code such as
PLL mul/div for L0/L1 and XTRE prescaler on F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In SMP, MPID is mybe not equal to cpu logic ID, so can't
use MPID to get rdist base address from gic_rdists[], this
patch get logic ID from arch_curr_cpu()->id, and
find current CPU's rdist base address from:
gic_rdists[cpu_logic_id]
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Move emul.h out of the top level include/ dir into
include/drivers/emul.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clock Pulse Generator, Module Standby Software Reset, are registers
presents in Renesas Gen3 SoC series.
MSSR is used to supply clock to the different modules, shuch as timer,
or UART, it's also possible to issue a reset the different module.
CPG registers allow to get the rate or to set some divider like for
the CAN clock.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Add parenthesis for the parameters to avoid the issues if
parameter is an expression but not an immediate value.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change the GPIO_MMIO32_INIT to take a devicetree node since we want
to use DEVICE_DT_DEFINE. This makes it so that code using
GPIO_DT_SPEC_GET works correctly with GPIO controllers that utilize
GPIO MMIO32.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Also, explicitly check for NULL.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The API is deprecated as it was decided to build in the flash protection
service into write and erase procedures.
This is solution chosen for fix following issue:
When two or more threads writes to flash device it is
possible that flash protection will be enabled by one of
threads despite another thread(s) still needs it disabled.
fixes#3127
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Made write_protection handler not mandatory.
flash_write_protection_set() becomes no-operation.
If write_protection handler is provided by the driver implementation
it will be called within flash_writ() and flash_erase().
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There was an inconsistency in the API as z_nrf_rtc_timer_chan_alloc
returned int but other function were using uint32_t for channel
argument. Updated api to use int32_t everywhere.
Update nrf_802154 driver which was using this api to use int32_t.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move disk driver interface to own header and
separate disk access interface and disk driver interface.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This patch includes initial support for FT800 display driver.
It includes basic features. It can be easily extended with more
FT800 display list and co-processor features.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove support for counter_read and counter_get_max_relative_alarm as
they have been deprecated for at least 2 releases. As part of the
removal of counter_get_max_relative_alarm remove the code in all
counter drivers that implemented the API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds support for the Texas Instruments FDC2X1X Capacitance-to-Digital
Converter for Proximity and Level Sensing Applications.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
The fixed number of 24 RTEs is a legacy thing, and long gone by now.
IOAPICs expose the maximum number of RTEs they have via the version
register, so let's use it.
This avoids to manually tweak a Kconfig option (which is now removed)
and fixes the RTE number for all x86 targets relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
