Include new AT shell alongside the PM device shell to allow
for powering back up the modem after the sample has completed
to test out the at shell.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The sample won't build with PSA crypto enabled on non-secure platform,
causing disturbances in the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A few samples were not limiting the CI execution scope in any reasonable
way, they should at least limit the execution to platforms that support
netif capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align the name of the ETH PTP Config Status values
depending on the stm32HAL serie
to be the HAL_ETH_PTP_NOT_CONFIGURATED/HAL_ETH_PTP_CONFIGURATED
or HAL_ETH_PTP_NOT_CONFIGURED/HAL_ETH_PTP_CONFIGURED
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Support NXP ENET_1G on mimxrt1170_evk/mimxrt1176/cm7 platform.
Added test configuration sample.net.zperf.nxp_enet1g and
documented the usage of the ethernet driver with ENET_1G
peripheral.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_CLOCK option does not correspond to any standard
option. It was used to active features of several distinct
POSIX Options and Option Groups, which complicated API and
application configuration as a result.
POSIX_CLOCK is being deprecated in order to ensure that Zephyr's
POSIX Kconfig variables correspond to those defined in the
specification, as of IEEE 1003.1-2017.
Additionally, CONFIG_TIMER is being deprecated because it does
not match the corresponding POSIX Option (_POSIX_TIMERS).
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_TIMERS
Similarly, we introduce the following Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_POSIX_CLOCK_SELECTION
* CONFIG_POSIX_CPUTIME
* CONFIG_POSIX_DELAYTIMER_MAX
* CONFIG_POSIX_MONOTONIC_CLOCK
* CONFIG_POSIX_TIMEOUTS
* CONFIG_POSIX_TIMER_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options that map directly to
standard POSIX Option Groups by simply removing "CONFIG_":
* CONFIG_POSIX_MULTI_PROCESS - sleep()
Similarly, in order to maintain parity with the current feature
set, we introduce the following additional Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_XSI_SINGLE_PROCESS - gettimeofday()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Due to the recent changes in mbed TLS area, and due to adding new
certificates to the sample, the mbed TLS configuration has to be update
to be able to support them all.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Baltimore certificate expires in 2025 and Azure is in the transition
period for the time being to the new certificates. Add support for all
certificates needed in the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The number of suitable network IPv6/4 configurations in interfaces
affect the number of pollable sockets. So need to increase the value
from the default value of 3.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
according to the latest build log, we need increase the MAX_THREEED
/usr/bin/python3 scripts/build/gen_kobject_list.py \
--kernel twister-out/frdm_k64f/samples/net/mqtt_publisher/\
sample.net.mqtt_publisher.userspace/zephyr/zephyr_pre0.elf \
--gperf-output kobject_prebuilt_hash.gperf --include-subsystem-list \
twister-out/frdm_k64f/samples/net/mqtt_publisher/\
sample.net.mqtt_publisher.userspace/zephyr/misc/generated/struct_tags.json
Too many thread objects (17)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
In an effort to shave off code size, remove out-of-the-box
enabling of crypto features (except SHA-256).
Configurations are adjusted to enable what they need.
Bonuses:
- When enabled, AES now defaults to using a smaller version
(`CONFIG_MBEDTLS_AES_ROM_TABLES` isn't default enabled anymore,
and if enabled, `CONFIG_MBEDTLS_AES_FEWER_TABLES` defaults to y).
- Conditions around Mbed TLS Kconfig options have been improved
to reflect the reality of the dependencies.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The gsm modem driver is deprecated and will be removed. Remove
the build overlay and dependency on the gsm modem from the
tagoio sample.
The new cellular modem driver and subsystem use the native
networking stack and the pm subsystem, so just like ethernet,
enabling the cellular modem is up to the board configuration.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The gsm_modem driver is deprecated, and will be removed. Remove
the gsm modem sample which depends on the deprecated driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
In order to be compatible with Linux AF_PACKET socket calls, the
protocol field needs to be in network byte order.
So for example, if user wants to receive all packets, then the
protocol field needs to be set as "htons(ETH_P_ALL)".
See Linux manual page at
https://www.man7.org/linux/man-pages/man7/packet.7.html
for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Socket service library uses eventfd, which does not work with
native_posix platform, hence need to exclude it from samples that now
rely on socket services.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
CONFIG_POSIX_API depends on !CONFIG_NATIVE_APPLICATION, which is
incompatible with the native_posix platforms.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This sample demonstrates the implementation of an (industrial) IoT
sensor/actuator device. The application uses the MQTT protocol to
securely send sensor data to a remote MQTT broker, while responding
to commands received over the MQTT connection.
Signed-off-by: Jason Murphy <jason.murphy@analog.com>
As native_posix is no longer supported, due to incompatibility with
CONFIG_POSIX_API, remove a dedicated config for it.
A config for qemu_cortex_m3 needed to enable RNG, as otherwise it's not
available for the platform and gives build error.
Finally, enable qemu_cortex_m3 build in the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
select modem backend statistics and enable shell in cellular
modem sample. This will help advertise the feature, and can
help quickly identify issues with to small buffers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Because of changes in other network header files, the net_if.h
was not included so add it directly to the echo-client and
mqtt_azure sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the LLMNR responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Improve navigability in the documentation by adding a link to the main
HTTP Server documentation page to the HTTP Server sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This sample assumes that two separate sockets can be bound on IPv4 and
IPv6. On Linux (via Native Simulator Offloaded Sockets) this is possible
when there is no IPv4 to IPv6 mapping. Same can be true to other offloaded
sockets.
CONFIG_NET_IPV4_MAPPING_TO_IPV6 is disabled for this sample, so IPv4 to
IPv6 mapping is disabled for Zephyr native IPv6 layer. For offloaded
sockets this option does not define whether mapping is enabled or not, so
try to unconditionally (and without error checking) disable it.
This patch fixes compatibility with NSOS, since two separate sockets can be
bound on the same address and port, one for IPv4 and second for IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add documentation page for HTTP server functionality.
Rename existing HTTP documentation to HTTP client, as it only covers the
client library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently wifi sample code contains a pair of .conf and .overlay
for every single esp32-based board. Files are usually identical.
This PR remove all esp32* board files and use common socs instead.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not print progress report so that makes debugging things
a lot harder. It is still possible to enable printouts if needed
by setting PRINT_PROGRESS symbol.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the IPv6 address that our socket is bound to deprecates, then
re-create the socket so that we avoid using deprecated IPv6 address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix the failures introduced in #72078 by manually enabling all the
hash algorithms as they used to be.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
A scheduler fix for free memory usage on aborted threads is now using
a per-CPU dummy thread instead of a single stack-based one at startup.
These static thread objects need spots in the kobj bitmasks, and a few
tests are sitting right at the default limit (16 threads).
Signed-off-by: Andy Ross <andyross@google.com>
A simple HTTP server sample application.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates the linker script fragments under 'samples' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The last parameter to getsockopt() should be a socklen_t *
not an int *.
Let's fix it to avoid a build warning which breaks this tests
in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.
Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.
Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Deprecate ETH_MCUX, by:
- Marking it as DEPRECATED in Kconfig, obviously.
- Unmarking the new driver as experimental.
- Putting the new and old drivers in the same folder.
- Reworking the menu appearance of the driver selection.
Note that technically now it is possible to choose the wrong
driver than what is enabled in DT, this is intentional, but
the correct one will obviously be enabled by default.
- Convert all sample overlays to the new Kconfigs. This was
part of the motivation for the shared overlays, as it was
causing twister/CI logs to look ugly and misleading due
to Kconfig warnings.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
