This commit adds a short note in reference/kernel/other/float.
The note instructs to apply pre-tagging of ARM threads to
indicate that they indend to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit rewrites the documentation section describing
the Shared FP registers mode for Cortex-M to align with the
latest architecture rework of Shared FP mode.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added CONFIG_LOG_DETECT_MISSED_STRDUP (by default on) which enables
scanning of log message strings in search for %s and reports if
string address is not from strdup buffer pool and outside read only
memory section which indicates that log_strdup() wrapping is missing
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Do not always print general help for ping cmd. Only if user supplies
'-h' or '--help' command, print information about the parameters.
After this the generated HTML documentation looks better for the
ping command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit removes the activation of the FP context
in ARM system boot. There is no need to do this, since
the FP context will be activated in the presence of
floating point instructions. We update the reference
documentation accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Callbacks called from the RX thread may block, but should avoid doing
it for long periods of time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some clarifications to BSD socket descriptions. Also added
rendering hints for some strings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit brings power management subystem documentation up to date
with the implementation. The main changes since the last time the
documentation was updated include introduction of power managment
policies.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit updates the documentation as follows:
- stresses that the lazy stacking preservation is disabled
by default and not supported in ARM Cortex-M builds,
- corrects the figure of extra stack requirement when
floating point services are enabled in ARM builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit provides the following fixes:
- Corrects the note regarding which ARM MCUs may support
floating point services
- Rewords the text stressing the undefined behavior when
multiple threads access the floating point registers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add framework for device Idle Power Management(IPM)
for suspending devices based on device idle. This will
help in saving power even while system(CPU) is active.
The framework uses device_set_power_state() API set the
device power state accordingly based on the usage count.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Use proper link to Zephyr source files. Fix rendering of special
options like NET_OK, NET_DROP and NET_CONTINUE.
Add reference links to network technologies documents.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case of early crash, shell will not output logs. Added
documentation explaining how to handle such situations.
It is recommended to enable simple logger backend (RTT, UART)
which are available earlier.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The architecture document contained old information and is now
updated to match the reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The VLAN documentation had double wording and proper links to files
in github was missing, which did not look good in the rendered HTML
page.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix link to DNS Kconfig option. Add proper links to DNS files
in github. Fixed link to DNS sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The L2 documentation was describing functionality that has changed
recently. Now it should match the current reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
