Add configuration for the mimxrt1024_evk board. This board does not have
any of the FXOS8700 interrupt pins connected by default, so triggers are
not available.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a new struct that provides information to the upper
layer when accepting an connected isochronous stream.
The CIG ID and CIS ID makes it possible for the upper layer
to determine which ISO channels are "together" in a group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some build variants will fail runtime for certain boards (e.g. nRF52832)
due to stack overflow. Avoid this by increasing the stack size.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Add the BT_ISO_SDU_BUF_SIZE which can be used to declare
the TX buffers for ISO, similar to the BT_L2CAP_SDU_BUF_SIZE
macro for L2CAP.
This also updates the ISO samples to use this as well
updating the SDU check to use
CONFIG_BT_ISO_TX_MTU/CONFIG_BT_ISO_RX_MTU without
subtracting the BT_ISO_CHAN_SEND_RESERVE to make the
API more clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As this makes no difference, it's misleading so let's remove it to stop
being misled. I don't know why initial commit efa794dbc5 added it but
the build directory is strictly identical with or without this line.
The SOF code is included in the build thanks to CONFIG_SOF in prj.conf,
not this.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Each backend can configure separately features like colors on/off, VT100
handling and so on. This can be very handy for planned MQTT backend.
Shell will not send VT100 commands when VT100 is not enabled globally or
for particular backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Move memory.h out of the way in a more "private" space
(include/linker/devicetree_reserved.h) to prevent polluting the
devicetree space.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fixes: #38403
Removing unneeded `imply GPIO` and `CONFIG_GPIO=y` occurrences where no
files are added to the gpio zephyr library.
Also removed `CONFIG_GPIO=y` occurences where this is handled by
defconfigs for the soc or board.
Selection of GPIO without selecting any drivers results in the warning:
> No SOURCES given to Zephyr library: drivers__gpio
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update the sample.yaml files for the modbus samples:
- depends_on entries should just be space separated, drop the comma
- add the platform referenced in the documentation to platform_allow
- replace the deprecated dt_compat_enabled_with_alias with
dt_enabled_alias_with_parent_compat
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This has been unreferenced since:
4ff616b647 modbus: rework interface configuration
This generates a compiler warning, but it went unnoticed because the
sample test is configured incorrectly and not running.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Finetune coap_server sample parameters for better user experience.
Reduce the maximum retransmission count to release resources earilier in
case client is unreachable and no longer responds. Increase the maximum
number of pending retransmissions, along with the heap size (the buffers
for messages are allocated on a heap), to improve sample responsiveness,
in case multiple unreplied messages are pending retransmission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case no reply is received for notification message, remove the
corresponsding observer since it's no longer reachable, freeing slot for
another one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retransmission handler only increased the retransmission count, w/o
sending the actual message again. Additionally, the next retransmission
time calculation was broken - it did not take into consideration the
time that has already passed since before retransmission, and re-applied
the entire timeout value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is a copy-paste error in this sample code that results
in a function for input events being called for an output pin.
By chance, this has no influence on the behavior of the sample,
as the function returns a register offset that for events and
tasks is the same for a given channel, but obviously the code
is confusing.
This is fixed by replacing the relevant part with more suitable
function calls, to also simplify the code a little.
On the occasion, also a remark is added about no button debouncing
used in the sample, to prevent users from being surprised by its
possible behavior.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable CONFIG_DEBUG when test is run in CI.
This will allow DGB access in stop modes (and specially flashing)
and avoid potential issues when test in run in a test suite.
Note that on some targets (stm32wb for instance) openocd is able
to do the same operation, and which allows to reflash the target
even if switch was not enabled, but this could not be the case
on all targets.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The board name used in the zephyr-app-commands directive was the old
name for the Thingy52 board.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF battery sample claims that it works without the need of a vbatt
node (voltage divider). However, this was currently not possible because
the sample code did have no means to extract the necessary ADC details
(instance and channel) from Devicetree unless vbatt was present. Similar
to other ADC samples, the zephyr,user node is used to define io-channels
property in this case. The sample README has been updated with an
example of how measurement without a voltage divider can be achieved.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When using the IEEE802154 radio interface in CONFIG_IEEE802154_RAW_MODE,
there is no way to handle ack frames because of the dummy implementation
of ieee802154_radio_handle_ack() in the ieee802154_radio header file.
Removed the dummy implementation from the header so you can/need to
implement it in the application.
samples: added implementation of ieee802154_radio_handle_ack() to
wpan_serial and wpanusb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
The TensorFlow Lite module makes use of the features provided by the
standard C++ library (e.g. `#include <functional>`), so the standard
C++ library config must be enabled for it.
This used to work without `CONFIG_LIB_CPLUSPLUS=y` due to the bug
described in the issue #36644.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
With "Incompatible (u)intptr_t type and PRIxPTR definitions",
https://github.com/zephyrproject-rtos/zephyr/issues/37718,
issue resolved the FIXME code is no longer needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This test makes use of dynamic RAM allocation done on the leftover
SRAM. Similarly to test/posix/eventfd, limit this test execution on
platforms with at least 32K of RAM available.
Fixes#38601
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
From 2.4 to 2.7 the net samples pair echo-server/client increase the
SRAM requirements. This adjusts example features to free necessary SRAM
to run example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sample from samples/drivers/misc/ft800/ causes twister to
timeout as it has no pass conditions defiend nor producess any
output that can be verified. What is more, it requires a shield
which is not reflected in the sample.yaml. This fix sets test harness
to display and adds an entry for the required fixture.
Fixes: #38536
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a warning if the image is unconfirmed. Add a delay before rebooting
so that the user knows what happened.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Twister was failing for samples/drivers/audio/dmic with timeout
because there were no pass conditions defined. This patch sets
harness to console and adds regex entries to be checked.
Fixes: #38532
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Since commit 718c77a4cd ("dts: arm: stm32f0 soc serie has dma of type
V2bis"), the DMA DT cell of STM32F0 MCU has been fixed. It now has three
elements instead of five previously.
This patch fixes the dma property used in nucleo_f070rb.overlay
accordingly.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
When using the stack fork type in the philosophers sample,
there were a few pointer type mismatch since the k_stack_*()
functions are using stack_data_t but the parameters are uint32_t.
So cast them to void pointer to suppress compiler warnings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to a historical error introduced during an hci_uart refactor, the
get_len() function was using the wrong HCI H4 packet identifier for
commands. Instead of using H4_CMD (0x01) it was trying to match
BT_BUF_CMD (0x00).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds shell support for FPGA drivers.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This adds driver for EOS_S3 SoC FPGA.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The HiFive Unleashed and HiFive Unmatched boards do not enable the
SPI0 controller that the flash is connected to. This test will not
build on these platforms because SPI0 bus controller is missing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch fixes printf format specifier "%u" -> "%zu" for printing
an argument of size_t on 64bit environment.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Add a very simple application intended to show how to use the Audio
DMIC API and also to be an aid in developing drivers to implement
this API.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These are getting build failures due to some kind of devicetree
console definition missing. These devices don't do networking, and
strictly don't even have a proper console device (logging is done via
a host mechanism). Probably fixable. Not worth the trouble. Filter.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix two typos in documentation, one in a sample's comment, and one in a
sample's console message. Found while learning Zephyr and exploring the
sources.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
