The setting of initial state in handled by the common driver,
which calls the enable function for any regulator that has
regulator-boot-on set, and is not already enabled.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
When not using 4 channel capture, overflows were never reported
to the application, because the check was in the
four_channel_capture_support branch.
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
Check the return values from the I2C API functions called in init() and
fail driver initialization if unsuccessful.
Fixes: #66827
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The QCCID handler is Quectel specific and as such may not be part
of the modem cellular driver which only supports commands defined
in 3GPP TS 27.007
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The modem_cellular.c driver now uses a common script to get
signal strenght, which is run on demand. This is more efficient
than polling it, and simpler since every modem doesn't have to
define their own variant of the script.
Additionally, the CSQ handler now stores the "raw" rssi value
returned from AT+CSQ to be parsed by the cellular_modem_get_signal
implementation.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Move the implementations of the cellular API in modem_cellular.c
to an cellular_driver_structure, and implement this API structure
withing the device drivers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
In Passive Receive mode, ESP modem will buffer rx data.
This fix makes the data still available to user,
even though the peer has closed the socket.
Otherwise, user will fail to get the last rx data,
when the socket is closed by the peer.
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Don't execute `irq_enable` in process of the `ra_icu_irq_connect_dynamic`.
The caller of `ra_icu_irq_connect_dynamic` is only `gpio_ra_pin_configure`
at this time. `gpio_ra_pin_configure` calls `irq_enable` just after called
`ra_icu_irq_connect_dynamic`.
So removing 'irq_enable' from 'ra_icu_irq_connect_dynamic' has no effect
on behavior.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
DEVICE_MMIO_MAP() is an unnecessary process, so delete it.
I created uart_ra.c based on uart_rcar.c, but
I forgot to correct the name. I fixed it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Devices like the ATSAM series chips have retained registers
which are used to store memory. The memory is accessed just
like RAM, but since they are registers, their size and
address is used directly.
This commit adds a near complete copy of the generic retained
ram driver and bindings file, adding the reg property to
the bindings file, and updating the init macro in the driver
to use the reg address and size.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Implement level based gpio interrupts, by using a worker queue to
repeatedly call the gpio callbacks until the gpio is no longer active.
Update unit test for new interrupts.
Bug #66401
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Use #if instead of IS_ENABLED for
CONFIG_SOC_IT8XXX2_GPIO_GROUP_K_L_DEFAULT_PULL_DOWN, otherwise DTS files
are required to provide gpiok and gpiol even if they are not used.
Bug #66401
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Similar to other ITE drivers, wrap register accesses in ECREG. This will
allow mocking out the registers in tests.
Bug #66401
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Erase operation with block of 64KByte
larger size than the default 4K sector size
if the flash supports.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add max size check to dac sam and sam0
There is no size check in dac_sam_write_value and dac_sam0_write_value.
Besides, the ret value should also be different.
Fixes#65021
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Move reading PCIE_CONF_CMDSTAT before actual usage. There are four
return branches before value is used.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add an option to enable a input_kbd_matrix_actual_key_mask_set API to
enable or disable keys dynamically in the mask. This can be useful if
the exact key mask is determined in runtime and the device is using a
single firmware for multiple matrix configurations.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This change marks each instance of the 'rtc_driver_api' as 'static const'.
The rationale is that 'rtc_driver_api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Only reset cause is supported as there is no common unique id
present on those chips.
Unique ID can be put in OTP but there is no single specification for this.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Use K_KERNEL_STACK_SIZEOF instead of the config directly to set the
stack size in k_thread_create() calls.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update LPSS DMA init interface which is common and
independent of parent-node.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
We should set the z_clock_hw_cycles_per_sec as the value of
the system clock frequency.
There was a mistake in referencing the clock source set before
initialization.
I corrected it to reflect the clock value after initialization.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
I/O or memory decoding should be disabled via the command register
before sizing BAR for calculation MMIO size
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
Only copy up to IFNAMSIZ - 1 number of characters of the interface name to
leave room for null termination of string.
Fixes: #66777
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When reconfiguring a previously used endpoint, it may still be locked
when a write was taking place when e.g. the host application crashed.
The call to udc_rpi_cancel_endpoint seems to do a proper cleanup of
the endpoint, i.e. the write semaphore will be released.
Fixes#66723.
Signed-off-by: Manuel Aebischer <manuel.aebischer@netmodule.com>
When Bluetooth is enabled, it is required to arbitrate flash accesses
between RF and write accesses (for user activity).
A dedicated flash manager is provided as part of STM32WBA BLE lib.
Implement a dedicated driver using FM Apis to handle RF activity.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32WBA controller uses a PKA driver to perform cyphering operations
on keys. Since PKA hardware block requires RNG clock to be enabled, a
synchronization with zephyr RNG driver is needed.
Use RNG enable status to check if RNG could be switched off or needs to
be switched on.
Similarly in entropy driver, don't cut RNG clock if PKA is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The driver works on active low signals only, change the interrupt
configuration to trigger on falling edges only.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There are some issues with the extended endpoint settings. The incorrect
setting leads to the chip being unable to respond with NAK when the host
polls the extended endpoint for data transfers. Additionally, the controls
for the extended endpoint's ISO and PID data sequence are also incorrect.
This commit addresses these issues to properly support extended endpoint
transactions.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
There are two registers that control the selection of one FIFO as data
buffer for 15 endpoints (ep1-ep15). Both registers should be configured
before sending and receiving data. Additionally, there was an issue with
the corresponding FIFO index setting in the 'usb_dc_ep_read_continue'
function, which has been addressed in this commit.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
