Adding an overlay to configure the nucleo_l4r5zi for testing the pwm
blinky application on red led (PB14 on nucleo board)
Each has a specific pwm output from different timers/channels
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
LC3 codec integration into BAP Unicast client and server
sample applications.
Will be enabled by default for a native_posix and nrf5430
cpuapp builds.
The client will continuously transmit a LC3 encoded 400Hz
sine wave and the client will receive and decode the data.
Implementation verified using UART based HCI controller
with ISO interface (userchan.c modified to open the UART
directly as bluez do not have support for ISO data) as well
as on-target execution on the nrf5340.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Co-authored-by: Emil Gydesen <Thalley@users.noreply.github.com>
Add configuration for stm32h7b3i_dk board which enables
integration of touch controller (KSCAN) present on the board
into LVGL
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Instead of having one single WQ per backend, move to one WQ per
instance instead and add a new "zephyr,priority" property in the DT to
set the WQ priority of the instance. Fix the sample as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The CANopenNode stack does not support CAN-FD. Depend on it being
disabled and explicitly disable it in the CANopenNode sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This enables automatic MTU exchange for services that require MTU size
bigger than default ATT MTU to operate.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This update Atmel sam0 serial drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam qdec sensor driver to use pinctrl driver and API.
It update board and sample with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update Atmel sam afec driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format. In addition, it
add overlay files to allow run samples/drivers/adc example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Added the stop_bits_client parameter to the modbus_serial_param struct.
Being able to configure the number of stop bits for the client
independently from the parity setting, allows to support connecting to
modbus server that do not follow the MODBUS over Serial Line Specification
and Implementation Guide.
Signed-off-by: Constantin Krischke <constantin.krischke@lemonbeat.com>
Signed-off-by: Jan Geldmacher <jan.geldmacher@lemonbeat.com>
This fixes an issue with the filesystem mcumgr being registered twice
in the sample application which resolves an issue with an endless loop
if a mcumgr handler is used which is not registered.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
- strtoll() and strtoull() are copies of strtol() and strtoul() with
types changed to long long instead of long.
- added tests
- added documentation
- removed stubs from civetweb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
This is a device-specific option and should therefore not be activated in
a generic project. Since the only boards that use this Kconfig symbol
(lpcxpresso54xx, lpcxpresso55sxx) don't build anyway, this option could
be removed. The device/board specific configuration should be placed in
the boards folder along with an appropriate device tree describing the
IPC nodes.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Corrects number of loops mentioned in README of sample
to match NUM_LOOPS in main.c. NUM_LOOPS was lowered in
PR #41123 to reduce the noise the sample produced in CI,
but the PR missed changing the README.
Cleans up one line.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This fixes an issue where we dropped the send buffer when
ipc_service_send() timed out waiting for a shared memory buffer.
We now wait in the IPC RX endpoint, but this shouldn't be a problem for
other IPC users, as PR #43806 introduces separate workqueues
per instance, with configurable priorities.
This also includes small changes regarding the IPC service return value.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Remove pinmux usage for acmp peripheral on kinetis boards, as mcux_acmp
driver supports pinctrl
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit adds support for the Arduino Nicla Sense ME board.
The board functionality has been tested using the samples:
- hello_world
- philosophers
- peripheral_dis
- spi_flash
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
The nrf52840dk_nrf52840 board has been ported to pinctrl, so there's no
need to keep duplicated definitions in the sample anymore.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Include a pointer to the CAN controller device for the CAN
transmit, receive, and state change callback functions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Extend the macro with checks for DT properties related to pin
assignments that are defined but would be ignored, depending on
whether PINCTRL is enabled or not, what presumably indicates
a resulting configuration different from what the user expects.
Add also a possibility to indicate that the pinctrl-1 property
should not be checked because the caller does not support the
sleep state.
Rename the macro so that its name better reflects its function.
Update accordingly all drivers that use it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds antenna description for the nrf5340dk_nrf5340_cpunet
target. It allows to performthe Direct Test Mode with the
CTE feature on this target.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Adds support for the nrf52833dk_nrf52833 which supports
the Direction Finding feature. It allows also to perform
the Direct Test Mode with the CTE feature.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
There were wrong GPIOs assigned for antenna switches.
Used pins were assigned to other peripehrals so that
there were no outpus printed.
The samples should use GPIOs that are not assigned to any
peripheral.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
<zephyr.h> ends up pulling <sys/printk.h> via <kernel_includes.h>, so
simplify the sample.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The SOF System Agent is redundant under Zephyr, we're using different
performance monitors there.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The pm_constraint_* APIs were effectively used by the policy manager
only. This patch renames the API to the policy namespace and makes its
naming more explicit:
- pm_constraint_set -> pm_policy_state_lock_get()
- pm_constraint_release -> pm_policy_state_lock_put()
- pm_constraint_get -> pm_policy_state_lock_is_active()
The reason for these changes is that constraints can be of many types:
allow/disallow states, impose latency requirements, etc. The new naming
also makes explicit that the API calls will influence the PM policy
behavior.
All drivers and documentation have been updated accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There are no more context defines specific to metadata, the ones
coming from Assigned Numbers shall be used.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
