For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit fixes the following issues for adp_xc7k/ae350
1. Incorrect copyright due to copy-paste error
2. Separate RAM region for the host and remote clusters
3. Allocate hart 0 for host and hart 1 for remote cluster
4. Use mbox channel 9, 10 for the sample, leaving channel/irq source
1 ~ 8 for ae350 8-core IPI
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Enable support for FRDM_RW612 with memc driver sample, using attached
aps6404l PSRAM.
Signed-off-by: David Missael Maciel <davidmissael.maciel@nxp.com>
Output the timestamp of the PPS timepulse when printing the fix
information, if the driver support the timepulse and it has started
toggling.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Consolidate the testcase.yaml definition for the display sample where
possible to use a single testcase for all shields. This won't work for
all testcases, but helps avoid the pattern where a new testcase using
"platform-allow" is added for every shield/board combination that needs
to be run with this sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Currently, the camera fixture test can only tell whether data are dumped
onto memory. This is to check further if the image content is correct.
The algorithm is rather simple: compare the average color of each bar
of a generated pattern with a predefined target in CIELAB76 color
space (which is nearly perceptually uniform).
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The logs that the fixture test are based on are not printed anymore due
to recent changes from "printk" to "LOG_DBG". Change the log level so
that it can work again.
Remove "Capture started" as it is not a relevant test regex. Logs are
sometimes not correctly printed in the console, for example, we can see:
DEBUG - DEVICE: muart:~$ [mapture started
As "Capture started" is a one-time log, fixture test will then fail due
to timeout.
Also, consolidate other regex.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
SAADC peripheral for nRF54L Series allows to choose internal
voltages as positive inputs and samples shall showcase that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Do not apply format setting unless needed. Also, correct the check for
the RGB565 format setting- the zephyr display API treats RGB565 and
BGR565 as big endian, so the format needed here is BGR565.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for using the SMARTDMA engine on the FRDM-MCXN947 board with
the video capture sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Handle line_offset field within video capture sample. Other samples do
not support partial framebuffers and therefore can ignore this field.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove the unnecessary video-controls header included in video.h.
Drivers, applications should explicitly include it when needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make the blinking and fading parameters adjustable so that samples
can be run on devices that support only short periods.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add sample application to capture an image frame from a camera
and send it for display on LCD via the LVGL library.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add code to get the current frame rate and enumerate all supported frame
rates (frame intervals) of the current format.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add Devicetree overlay for samples basic/blinky_pwm and drivers/led/pwm
for frdm_mcxc242 board to set appropriate tpm clock source and
to enable pwmleds.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
