Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This file defines the crypto driver API, cipher is supposed to be just
one type of capability (other can be hash) of these drivers, just
change the file name to be consistent with it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a couple of extra shield configurations to catch regressions with
the st7735r, gd7965 and ls0xx drivers.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
- Filter out the remaining CAN tests if no zephyr,canbus chosen node is
enabled in the devicetree.
- Rename the tests to shorten the name a bit.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The driver was never migrated to Devicetree, this patch converts the
driver to a proper Devicetree based device.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The driver does not implement a display API, it has a custom API. Having
it under display is confusing, since display API consumers may expect
they can use it. These sort of custom drivers fit better under
drivers/misc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a basic device tree overlay to support the use of the ATSAMD21 XPro
dev board with the ADC sample application.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
All drivers that require input_positive to be set should be given it.
Some parts may require an offset, so abstract this away too.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Lora samples are missing harnesses and hence are reported
failed by default by twister.
Add required harnesses to be able to detect correct and faulty
test executions.
Fixes#42159
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The CAN_BUS_UNKNOWN CAN controller state is only used to indicate that
the current CAN controller state could not be read.
Remove it and change the signature of the can_get_state() API function
to return an integer indicating success or failure.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The spi node of the led_ws2812 now includes the frame format
as defined by the dts bindings spi-device.yaml
SPI_FRAME_FORMAT_TI is selected with overlay for target boards.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The STM32 single_wire example was merged in parallel to this sample
and ended up as a sub-folder of this one. Separate both into their
own folders.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add optional user data argument to can_set_state_change_callback() to
comply with Zephyr API design guidelines.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This sample demonstrates the use of the UART driver. The data is
received using an ISR callback and a message queue. For sending data,
the polling API is used.
Signed-off-by: Martin Jäger <martin@libre.solar>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Excluded due to conflicts with adafruit_2_8_tft_touch_v2.
Both boards got a touch controller.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Specify in the API that the callback must be registered before the
channel is enabled, fix the NRFX IPC driver to be compliant and change
the MBOX sample.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Convert the CAN sample from using can_attach_workq() to using
can_attach_msgq() and triggered work via k_work_poll_submit().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Place the nodes to the proper place into the DT. The driver is calling
directly into the NRFX without using any direct memory addressing so
this is mostly a cosmetic fix.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Various obsolote and misnamed platfomrs in test filters theat went
undetected for a while.
Fixes#41222
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added dts overlay and config to support using
samples/driver/apa201 with blueclover_plt_demo_v2_nrf52832.
Signed-off-by: Jeremy Wood <jeremy@bcdevices.com>
Search and replace `message(INFO " ` with `message(STATUS "`.
This would otherwise print "INFO <message"
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Sample should only be run if led is present on board.
Since, this is not the case on any of the in tree boards,
set the sample as build-only.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Rework samples to use DEVICE_DT_GET and DT_CHOSEN
to get default display controller device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This adds an spi master mode driver via bitbanged gpio. Only syncronous
transfers are implemented. Clock signal timing is accomplished via busy
waits, the gpios are manipulated via the standard gpio interface; these
two factors limit the frequency at which it can operate - but here
a simple and generic implementation was chosen over performance.
The driver supports the various clock polarity and phase
configurations, and can also work with word sizes which are non
multiples of 8bits, currently up to 16 bits.
A sample program is also added demonstrating basic use of the driver
with 9bit data words.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Pinctrl is missing in i2c1 device description on stm32373c_eval
ovderlay file, besides using I2C1 this board (as mentioned in readme)
requires to remove 2 resistors on the board.
Make it simple and instead use a board with arduino_i2c port
available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Currently the IPM samples are hosted in the IPC sample location. Clean
this situation up by moving the IPM samples to a new location.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
