Fix size of L2CAP disconnect request buffer pool which did not include
the size of the L2CAP signal header.
Regression from: 3346aa4d39
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add public function to set Constant Tone Extension transmission
enabled or disabled for periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable CTE HCI command requires update of a state of its
execution after receive command completion response from
controller. Host has already implemented such functionality
but it was used only internally by hci_core.
This commit changes it to be accessible from other sourece files
in host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix compilation error caused by missing header files.
Reorganized order of header files include.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This is a pairing function with bt_le_scan_cb_register()
to used for remove the scanner callback from callback list.
Signed-off-by: chao an <anchao@xiaomi.com>
Fix crash in ATT when the response for a request is received after
the ATT timeout has fired and the ATT channel has been detached.
Add similar handling for all ATT channel operations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add publicly accessible function to set Constant Tone Extension
parameters for CTE transmission with periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of a wrapper for HCI_LE_Set_-
Connectionless_CTE_Transmit_Parameters send command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Direction Finding to host initialization sequence.
It allows to get information about Direction finding
optional CTE settings supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When using BT_GATT_AUTO_DISCOVER_CCC if the ccc_handle is not set
bt_gatt_subscribe would initiate a discovery to locate the CCC handle
but instead of awaiting it to complete the code does proceed to call
gatt_write_ccc even with ccc_handle being 0x0000 which is invalid.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds an assert on the "old" ref counter when doing unref, that
checks if there indeed is a reference to unref. This prevents
any underflows of the ref counter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Align bt_le_per_adv_sync_get_index, bt_conn_index and
bt_le_ext_adv_get_index in use of uintptr_t.
This fixes an issue where the cast to uint8_t happened before the
assert for a valid index, which could lead to invalid pointers passing
this assert.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve logging of pairing procedure when it fails with error code
unspecified. Since this is returned in many places debugging this
failure is not easy without adding additional debugging.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parallel pairing procedures using LE SC requiring the DHKey
calculation at the same time. This would otherwise end all other
pairing procedures with the SMP error code "unspecified" since
the call to bt_gen_dh_key would fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the allowed command bitmask before sending the SMP packet. This
avoids a race-condition in case the sending of the PDU made the
current thread not ready and would not be scheduled back in time
to set the bit before receiving the next SMP packet.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve multiple DHKey handling by allowing the next DHKey calculation
to be started in the dhkey ready callback.
Return error code EALREADY if the provided callback is the current
callback generating the DHKey.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Return the error code from the disconnect command to the application
when an invalid disconnect reason has been provided.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Do not abort pairing when peer sends a SMP command with an opcode
reserved for future use, as per spec.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add a dummy SMP command handler for keypress notification, that does
nothing (yet). This allows the next commit to work properly.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Added a new Bluetooth API that can be used to read the current and
maximum transmit power level of the radio. The reading operation is
performed over HCI.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Previously, if the peer address was not set, the host would
do undirected advertising even if the application applied
options only applicable to directed advertising.
Adding this additional parameter validation reduces the confusion
of application developers when they have configured something wrong.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Change type of advertising set handle to 8 bit to comply with
Bluetooth Core spec. type.
Fixes wrong usage of adv. set handle variable in function
bt_le_per_adv_set_param.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove irq_lock around connection lookup, this is no longer needed
now that the lookup functions always have a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make the connection lookup functions thread-safe by re-using the
bt_conn_ref returning NULL mechanism and keeping a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make bt_conn_ref return NULL if the reference count has reached zero.
This makes it possible to re-use bt_conn_ref internally to re-use the
reference count mechanism to check if the reference is in use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add defines and structs for reading information about supported codes,
codec capabilities and controller delays. Return parameter structs for
commands that return multiple variable-length fields only model the
fixed-length fields to minimize inconsistencies.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix missing initialization of periodic interval value in
advertising report info structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clarify that the acl_data struct includes the bt_buf type as the
first variable in the user data struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out implementation of functions defined in buf.h to its own
source file buf.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Bluetooth 5.1 Direction Finding HCI command:
HCI_LE_Read_Antenna_Information handling to Host.
Add wrapper function to handle send the command
and receive response from Controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Periodic Advertising Set Info Transfer depends on Extended
Advertising and connections hence enclose the LE Periodic
Advertising Set Info Sync Transfer implementation inside
CONFIG_BT_PER_ADV and CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Periodic Advertising Sync Transfer depends on connections
hence enclose the LE Periodic Advertising Sync Transfer
Received Event code inside CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the debug key-set comparison for debug keys comparing the
generated key in big-endian format against the debug private
key in little-endian format.
Fix this by converting the private key to big-endian format for
convenience.
Use the _be suffix for all variables to make the mixing of the
endian formats easier to read.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds support for using the periodic advertiser list.
This list allows the application to rely on specific
devices when creating periodic advertising syncs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the advertising option that controls if the directed advertiser
will use an RPA or the identity address of the peer for the initiator
address.
This option currently has two issues:
- It behaves differently if the privacy feature has been enabled,
which can be confusing for application to use.
- It cannot start a directed advertiser towards a peer that is not
privacy-enabled and has distributed an IRK.
This commit includes the following changes:
- When privacy has been enabled in order to advertise towards a
privacy-enabled peer the BT_LE_ADV_OPT_DIR_ADDR_RPA option must now
be set (same as when privacy has been disabled).
- It is now possible to start a directed advertiser using the identity
address of the peer when privacy-enabled.
- When privacy has been enabled the advertising option combination
of using the local identity address and an RPA as the initiator
address is now disallowed and will return an error code.
This is done because this combination did not actually work and would
have used the identity address of the peer instead.
- If the controller does not support controller-based privacy then
using the option BT_LE_ADV_OPT_DIR_ADDR_RPA will return ENOTSUP
because this behavior cannot be done with host-based privacy.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow application to enable L2CAP dynamic channels without support
for Enhanced Credit Based Flow Control (CBFC).
Since these are separate features in the qualification it should
be possible to qualify L2CAP connection oriented channels without
also having to qualify L2CAP enhanced credit based flow control.
The L2CAP/LE/REJ/BI-02-C conformance test will fail when enhanced CBFC
has not been selected in the ICS.
The lower tester expects that since the Enhanced CBFC is not supported,
the command L2CAP_CREDIT_BASED_CONNECTION_REQ should be met with an
L2CAP_COMMAND_REJECT_RSP and not an L2CAP_CREDIT_BASED_CONNECTION_RSP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If chan->conn is already NULL do not call bt_conn_unref as that will
likely cause a crash, also this make sure that if channel has been
disconnected using bt_iso_chan_disconnect it removes the channel from
connection list before setting the chan->conn to NULL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document and validate advertising parameters for the disallowed
advertising mode high duty cycle directed connectable advertising
using extended advertising PDUs.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue where the encrypt change has an error code, but the
encrypt change request was unrelated to the current ATT request.
This lead to the current ATT transaction being interpreted as finished
an the ATT client would proceed with the next ATT request, which would
fail since the ATT client is now violating the ATT single transaction
rule.
Updated similar if statement checking for the opposite to improve
readability.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
