Add sample code which demostrates the use of the offset
register offered in the TMP117.
Also add information about tmp117 in README.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Add a sample for demonstrating the usage of the NXP MCUX Analog
Comparator (ACMP) sensor driver. The sample currently only supports the
NXP TWR-KE18F development board.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add sample application for sensor lsm6dso. This sample has been
tested on stm32l562e_dk board, where lsm6dso is connect to I2C bus.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
Enables the magnetic vector magnitude function in the fxos8700 sensor
sample application to ensure it builds in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 power mode options (normal, low noise low power, high
resolution, low power) from Kconfigs to an optional device tree
property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Samples that include floating-point format specifications may need
cbprintf FP support. Make sure it's available.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The Nucleo-L031K6 development board has been tested with the MCP9808
sample code and works as expected.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
The overlay file defines an i2c interface for the
Feather nRF52840 Express and the Adafruit BME680.
Also adds the platform to the test build configuration.
Signed-off-by: Patrick K. Moffitt <patrick@moffitt.com>
Remove reference to a specific board, since that board doesn't have
this sensor.
Add a dependency on presence of a devicetree node that will be
required to build the driver.
Add a fixture that identifies the specific sensor required to run the
sample. This should be added as a side effect of specifying the
shield (though this is not currently done, it must be added in the
device description).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a sample to demonstrate and test the Wurth Elektronik WSEN-ITDS
accel sensor. Sample code covers accel and die temperature functions.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The NRF driver doesn't utilize the Kconfig symbol for per instance I2C
so we can remove setting that in the conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The sensor is on the nrf9160_innblue22 not nrf9160_innblue21. This
causes CI build failures since there is no dts node for the sensor
on the nrf9160_innblue21 board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. As part of this conversion we
remove the Kconfig options for per GPIO controller enables and instead
get that information from device tree. This means we now disable each
GPIO controller by default in the DTS and have each board dts enable the
GPIO controller ports it needs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
board support nrf9160_innblue22 includes the sensor in
nrf9160_innblue22_common.dts, explicit overlay can be removed
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
I personally don't find it very useful to have to maintain prj.conf
and prj_spi.conf for this sample. The information we need to make
this application "just work" with regards to the bus is available in
the devicetree, and Kconfig can now access it using
dt_compat_on_bus().
Do so, enabling I2C and SPI appropriately when a sensor of the right
type is on either of those buses.
If no sensors are enabled, the user gets the build-time error message
in main.c about no devices being found.
This approach is prone to the "stuck symbol" Kconfig problem covered
in our documentation, so a pristine build is necessary to change the
default settings from a previous build.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
