This commit adds two new commands to flash shell tools: flash load and
flash page_info.
Signed-off-by: Franciszek Zdobylak <fzdobylak@internships.antmicro.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extend sample to show how to use alternative approach of adding
subcommands using new APIs: SHELL_SUBCMD_SET_CREATE, SHELL_SUBCMD_ADD
and SHELL_SUBCMD_COND_ADD.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Getopt has been rework in this way that calling it does not require
extra state parameter and its execution is thread safe.
Global parameters describing the state of the getopt function have been
made available to ensure full API compatibility in using this library.
However, referencing these global variables directly is not thread
safe. In order to get the state of the getopt function for the thread
that is currently using it, call: getopt_state_get();
Extended the library with getopt_long and getopt_long_only functions.
Moved getopt libary from utils to posix.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Remove option CONFIG_USB_UART_CONSOLE where it has no influence
or enable CONFIG_SHELL_BACKEND_SERIAL_CHECK_DTR without taking
a detour through CONFIG_USB_UART_CONSOLE.
Check the compatibility of chosen property instead
of usage of CONFIG_USB_UART_CONSOLE option.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This change implements qsort() for the minimal libc via Heapsort.
Heapsort time complexity is O(n log(n)) in the best, average,
and worst cases. It is O(1) in space complexity (i.e. sorts
in-place) and is iterative rather than recursive. Heapsort is
not stable (i.e. does not preserve order of identical elements).
On cortex-m0, this implementation occupies ~240 bytes.
Fixes#28896
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
After the __printf_like validation was added to the shell_fprintf
functions we got warnings while building the
'samples/subsys/shell/shell_module' due to incorrect specifiers
while printing size_t variables. Fix that.
Fixes: #39386
Fixes: fe2075d140 "shell: Add __printf_like to shell_fprintf"
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This commit adds a new subcommand to the `demo` command that prints out
the name of the used board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Each backend can configure separately features like colors on/off, VT100
handling and so on. This can be very handy for planned MQTT backend.
Shell will not send VT100 commands when VT100 is not enabled globally or
for particular backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds a devmem load command for shell that allows
users to easily load arbitrary data into the device memory.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Use of CONFIG_THREAD_RUNTIME_STATS was added to this sample, but
caused issue because the call to z_thread_mark_switched_in()
is using k_cycle_get_32() before the timer is initialized.
Enable CONFIG_THREAD_RUNTIME_STATS_USE_TIMING_FUNCTIONS=y to
select hidden config CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT,
which calls to initialize the timer needed at boot for thread
runtime stats configuration.
Fixes#33275
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
shell_uart_release command shows how shell can be uninitialized and
release transport resources (uart) and reinitialized at runtime.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Using the new obscured user shell input feature,
provide examples of using it in login and logout commands.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Modify an example by adding command that is using shell_getopt funtion.
Extent sample.yaml with getopt configuration.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Set integration_platforms on these samples to just native_posix.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deactivate all features that are not absolutely needed to run
the shell.
Used CONFIG_CBPRINTF_NANO library to save 1020B.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
A change to the previous partition resulted in the unit address being
inconsistent with the reg property.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fixes: #24158
The shell/fs sample was using APPLICATION_SOURCE_DIR before it has been
defined.
This has now been fixed to use the proper way of overlaying board
specific settings using boards folder.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
