Fixes the channel 2 PWM pinmux adds servos and PWM LEDs.
Required to operate servo motors and status lighting.
Tested on RDDRONE board.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Sumit Batra <sumit.batra@nxp.com>
Co-authored-by: Landon Haugh <landon.haugh1@gmail.com>
Remove the EEPROM shell overlay from the EEPROM driver sample as this was
only introduced as a build test for the EEPROM shell. This is now done in
tests/drivers/eeprom/shell.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a sample program that demonstates how to run inferences on
Arm Ethos-U.
Signed-off-by: Kristofer Jonsson <kristofer.jonsson@arm.com>
Signed-off-by: Fredrik Knutsson <fredrik.knutsson@arm.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
with sysbuild, DTS overlays for boards cannot automatically be passed to
the remote core. This means DTS overlays must be present for remote cores
as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add lpc54114 configuration settings to enable booting second core with
sysbuild, and LMA address adjustment
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC55s69 requires the second core to output a hex build to ensure the
image is flashed to the correct location, and uses the
CONFIG_SECOND_CORE_MCUX symbol in each core's build to indicate the build
targets a dual core config
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit excludes thingy53_nrf5340_cpuapp_ns platform from building
wpanusb and wpan_serial samples. The platform doesn't support TF-M yet
and therefore the build is bound to fail.
Due to limitations of the filter functionality, a more generic approach
where _ns platforms without TF-M support would be excluded from the
build, for example:
filter: dt_chosen_enabled("zephyr,ieee802154") and
CONFIG_NRF_SOC_SECURE_SUPPORTED
doesn't properly filter out the needed platforms. As a result,
platform_exclude syntax is used to specifically exclude the platform.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The sample illustrates a way of using the runtime observer registration
feature. With this sample the developer can understand how to use static
and runtime observer registration.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The sample illustrates a way of exchange message with a host mock
running in a Python script. It can be used to improve the testability
and controllability of the tests.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The sample illustrates a way of send all the channel event to the host
by using the UART, a user_data portion, and the claim/finish APIs.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The work_queue sample illustrates three reaction styles available for
using zbus. The first is a listener that reacts by callback; use it should
for urgent reaction. The second is a listener that responds by callback;
instead of executing the code, it pushes a job to a work queue that will
be executed shortly but not immediately. The last one is the subscriber
that reacts using a queue; use it for an asynchronous reaction where the
developer would like to control the flow.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The hello world sample illustrates a simple way of using zbus. There is
a listener and a subscriber interacting each other by using a read-only
and a regular channel. The APIs are called by using the function
and macro variation.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Many driver samples or tests only had 'drivers' as the tag, without a
tag indicating what driver that is exactly, so add some missing tags.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running a flash read command on the flash shell, the hexdump
prints came out incorrect. There was a space missing between the
ninth element and its preceding "|", and a redundant newline.
This commit fixes this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The RP2040 needs a DTS overlay for the PWM to work with the
blinky_pwm examples. This commit adds the required overlay.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This commit adds support for compiling in support for several different
regions/frequencies and dynamically choosing which to use in run-time.
This commit introduces no API breakages - if a prj.conf contains only a
single region Kconfig, the new function lorawan_set_region() does not
need to be called.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
The most of the wwdg peripherals requires a reduced apb clock
to pass the sample.drivers.watchdog.stm32_wwdg testcase.
This apb1 prescaler is added to the overlay file
for that particular clock.
Specific overlay for the stm32h7 family because of the APB1
bus clock named d2ppre1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This add TFM cmake definitions to build mass storage sample for non
secure firmware boards versions. The stm32l562e_dk_ns board was used
to demonstrate. It uses SDMMC/SD with TFM profile large. Tests were
conducted using a 2GB transflash card with FAT-32 partition.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This enables usb and usb_device tag for tests. It explicitly disable
samples/subsys/usb/dfu for non-secure version of this board due to
building errors, which can be explored in future.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This sample demonstrates the usage of the MQTT-SN library over UDP.
It connects to a gateway, publishes to the topic "/uptime" and also
subscribes to "/number".
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
Add a sample presenting ipc_service working with icmsg multi endpoint
backend. The sample creates multiple instances of icmsg, one of them
consisting of two endpoints.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
When read callbacks are used, it bypasses LwM2M engine data
handling and therefore LwM2M observation cannot work properly.
Read callbacks should be used only on special cases.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
It was found that the existing regex check was not enough to validate
correctness of execution of mass samples. Tests would pass even when
a filesystem failed to be mounted. An additional line to check is added
to validate the setup of a filesystem.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This removes some modules and functionality from the sample to
reduce the output application size to assist in fitting it to MCUs
with less flash storage space.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit fixes the overlay file for running the
samples/subsys/fs/littlefs on the nucleo_h743zi platform.
The storage_partition is moved to the qspi_nor flash
instead of the internal flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Currently, the sync timeout means the device will timeout
straight after it syncs. This means we cannot send a sync
transfer as we are no longer synced.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
C++ standard requires C++ main() to have the return type of 'int'.
This commit updates the CHRE sample to define main() as
`int main(void)` and enable `CONFIG_CPP_MAIN`, which instructs the
Zephyr kernel to call the C++ main().
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization to run on the "POSIX
architecture" boards such as `native_posix`, since the POSIX arch now
properly supports the main() defined in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization sample to enable
`CONFIG_CPP_MAIN` since it defines its main() in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Add ADC driver sample overlays + update features in doc + metadata for TI
CC13x2/CC26x2 based boards (cc1352r_sensortag, cc1352r1_launchxl,
cc26x2r1_launchxl).
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
A simple sample with some (explained) tricks to get code relocation for
Intel ADSP CAVS platforms.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Add library model configuration to tfm_secure_partition model.
IPC model is now the default, so add back the library configuration
for the sample as an additional configuration to the default.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the min_ram limit to 64kB so that with new ztest lib
can run the sample on board with enough ram.
Smaller ram platforms are not used anymore.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
