Update the periodic sync sample to use the new delayable work API
for blinking the LED.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There is a choice to log btmon logs over UART or RTT.
You can choose number of RTT buffer, set its name and size.
Replaced CONFIG_BT_DEBUG_MONITOR with CONFIG_BT_DEBUG_MONITOR_UART
for UART usage and CONFIG_BT_DEBUG_MONITOR_RTT for RTT.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add an application that initializes Bluetooth Subsystem,
creates an Extended Advertising set, starts Periodic
Advertising and creates BIG to demonstrate ISO Broadcaster
functionality.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We need 1 byte of headroom for the SPI HCI protocol.
This is not added automatically on the slave side of the SPI connection.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Ups the CDB_NODE_COUNT config to fit 16 nodes, to make the sample more
usable for general mesh testing.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds blocking operation to the self configuration step by waiting for
the status response. This ensures that the provisioner is fully
configured, and reduces the number of loopback buffers required for the
self-configuring.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Runs the Provisioner sample's main thread in a cooperative priority to
avoid calling the Bluetooth APIs from a preemptive thread.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Instead of only configuring the Health Server model of the provisioned
device, the Provisioner will instead walk the target's composition data,
and bind each model to the same AppKey. This allows the provisioner to
be used with the base mesh sample, and demonstrates the new composition
data page 0 API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a sample of setting up and using an ISO central as
a source of ISO data. This will periodically send ISO
data to a connected ISO peripheral with varying sizes.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample is a bit messy; clean it up.
Remove unused includes, add missing include guards, clean up the
separation of responsibilities between main.c and the button and LED
helper files by moving code around, and replace the now-outmoded
device_get_binding() calls with GPIO_DT_SPEC_GET().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Drop device_get_binding() for microbit, using a gpio_dt_spec instead.
Rename the 'button' global to 'button_work' since it's a k_work
related to the button and does not actually represent the button
itself.
Fix a typo in the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Save a bit more SRAM on bbc_microbit by tuning some Kconfigs.
Mark some arrays const to try to avoid stack allocating them while
we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET on the chosen node directly.
The only in-tree board using the Kconfig option is rv32m1_vega_ri5cy.
It already sets the chosen node in the application overlay, albeit
incorrectly, so just fix it there and remove the now-redundant Kconfig
setting. That in turn triggers other build errors for this board, but
they don't seem to be related to this sample.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET_ANY instead of hard-coding a device label property.
As far as I can tell from in-tree drivers, "TEMP_0" is nRF specific
and refers to nodes with compatible "nordic,nrf-temp", so use that and
clean up the driver Kconfig while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Populates the onoff server stubs in the Bluetooth Mesh sample, and
implements generic LED based hardware support to include more boards.
Fixes#31031.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Document that for any Bluetooth sample to work on the nRF5340 device,
the additional application for the nRF5340 network core is required:
hci_rpmsg.
Signed-off-by: Michał Grochala <michal.grochala@nordicsemi.no>
The directory listing object is an internal object which
content is the aggregation of all the metadata of all objects
(including the directory listing object itself). The client
can read this value to get a list of all objects with names,
lengths, and other metadata.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Trigger BT_ASSERT with message to inform kernel when encountering an
unrecoverable condition in order to dump all pending logging messages.
In this change, the log level is configured by CONFIG_BT_LOG_LEVEL
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
The line break inside the :zephyr_file: directive causes a space
to be inserted into the link to the file, which means the link
does not work.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
The board specific interface in this sample is not handling errors.
Fix that by making board_init() return a negative error code or zero.
Rework the bbc_microbit specific board file by handling errors
appropriately and avoiding device_get_binding() to move some device
configuration errors to build time.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Remove unnecessary main stack configuration in bluetooth samples.
The HCI power control sample does not need to set the main stack this
low, and setting it causes restriction on what the application can
change in menuconfig. A change in the entropy driver causes stack
overflow.
The HCI uart sample sets the main stack to the default size.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the multiple board revisions feature to provide support for the new
hardware possibilities available in nRF9160 DK starting from v0.14.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use devicetree instead of Kconfig to configure the board control
switches in nRF9160 DK:
- add binding for the switches that provide optional signal routings
on this board
- add binding for the GPIO interface that can be used for communication
(e.g. UART based) between the nRF9160 and the nRF52840 on the DK,
and add GPIO mapping for this interface so that its lines can be used
without caring about of actual pin numbers on both sides
- add binding for one GPIO line chosen from the above interface that is
to allow the nRF9160 to reset the nRF52840
- update accordingly dts files and board specific code for both board
definitions associated with the DK
- introduce .dtsi files that can be included from dts overlays in order
to facilitate the use of the above GPIO interface; modify the overlay
in the hci_uart sample to provide an example of use of those files
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add an application that uses Direction Finding API for
transmission of CTE in connectionless mode (periodic adverising PDUs).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix stack overflow in the TX power control sample.
Current stack usage with 0.11.1 zephyr toolchain was at 100% stack
usage of the DYN TX stack.
Fixes: #31433
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated scan filter duplicate enum values and parameter.
This was deprecated for the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch modifies Bluetooth HCI RPMsg drivers and samples to use
RPMsg Service instead of configuring OpenAMP directly in the driver
or the sample.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
The IPSP example code is explicitly registering the all local-link nodes
address (ff02::1). This is currently already registered by the normal
IPv6 stack at interface initialization, so doing it in the application
is redundant.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This sample is trying to register four multicast addesses:
uart:~$ net iface
...
IPv6 multicast addresses (max 8):
ff02::1
ff02::1:ff01:c41e
ff02::1:ff00:1
ff02::1
Increasing CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT to 4 to make neighbor
discovery work correctly.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Currently a lot of common kconfig options are being set in
board-specific overlays.
This commit puts them in the main prj.conf.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
