Add a way of finding if a microkernel task is the idle task instead of
of duplicating:
task_priority_get() == (CONFIG_NUM_TASK_PRIORITIES - 1)
which could be subject to change.
Only available for microkernel, since there is no such concept in the
nanokernel.
Change-Id: Ie8930981f1a2ac5ff16f905f4eb4e333c8b59c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fixes the timeout recalculation in the following routines:
nano_task_fifo_get()
nano_task_lifo_get()
nano_task_sem_take()
_nano_task_sleep()
Without this fix, a task that called one of the previously listed
routines could in theory sleep/wait up to almost twice the requested
timeout.
Change-Id: I53196be84e65874e94a62d5b0be1b7aaaaeda91f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the nanokernel infrastructure to permit microkernel tasks
to block/unblock on nanokernel objects. Multiple tasks may wait
on a nanokernel object's dedicated task wait queue.
It is important to note that when data is posted to the object
all the tasks on that object's dedicated task wait queue may be
woken up but the data is not immediately given to any of the tasks.
This is done to maintain consistent behavior with the nanokernel
as in a nanokernel system, fibers are given preference in both
waiting on and getting data from a nanokernel object.
Change-Id: Ia5c7f21ae59a367d9fec23dafc3a918d9e767db5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Until now, this was not needed since the checks for being on a wait
queue were only performed if a fiber was known to be on a timeout queue
as well. However, an upcoming fix for _fiber_wakeup() needs to verify if
a fiber is on a wait queue even if it is not timing out, because said
fix needs to check if the fiber is timing out as well.
Change-Id: If1694ceb551f2029d6a145963e81d3826956fd1d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix an issue where, if a task is pending on a nano timeout, the duration
it wants to wait is not taken into account by the tickless idle code.
This could cause a system to wait forever, or to the limit of the timer
hardware (which is forever, for all intents and purposes).
This fix is to add one field in the nanokernel data structure for one
task to record the amount of ticks it will wait on a nano timeout. Only
one task has to be able to record this information, since, these waits
being looping busy waits, the task of highest priority is the only task
that can be actively waiting with a nano timeout. If a task of lower
priority was previously waiting, and a new task is now waiting, it means
that the wait of the original task has been interrupted, which will
cause said task to run the busy loop on the object again when it gets
scheduled, and the number of ticks it wants to wait has to be recomputed
and recorded again.
Change-Id: Ibcf0f288fc42d96897642cfee00ab7359716703f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The macros _NANO_TIMEOUT_TICK_GET() and _NANO_TIMEOUT_ADD() will be
used in later commits to help simplify the nanokernel APIs.
Change-Id: I668af85d775eab112953d064d9c91de607f60a59
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It's not really scheduling a fiber, it's making it ready. So, rename it
to _nano_fiber_ready().
Change-Id: I34bf67a8f0ea641bb2fd1c47fe8d689fef754cb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The timeout queue interface will allow having fiber interacting with the
nanokernel objects wait with a timeout. It can be completely excluded
from the kernel if not needed, via the CONFIG_NANO_TIMEOUTS option.
Most of the timeout queue interface is contained within timeout_q.h.
However, this file should never be included directly: rather, the
wait_q.h file is to be included instead, which itself provides NOOP
abstractions for some timeout functions when timeouts are not enabled in
the kernel.
Change-Id: Ifeb1b934e0c71d00c59ebc88a54ab26e49686807
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
1) Renames routine to conform to kernel naming conventions.
2) Relocates routine declaration to include files for
non-public nanokernel APIs.
3) Relocates routine definition so that it resides with the
nanokernel's other fiber manipulation routines.
4) Eliminates an unnecessary argument to the routine.
Change-Id: Ia139280dfea36262ca8417708786b4989f3eaee1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Icf5900c057f3412d3c7725c07176fe125c374958
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This will allow using it for nanokernel objects wait queue, and thus
having all the code for multiple-waiter nanokernel objects in one
location and reusable by all objects.
Change-Id: Ica27fea3d4bc74342e4c54fc8ea5a3425c293e80
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
