Scenarios sample.tfm.psa_test_crypto and
sample.tfm.psa_test_crypto require longer timeout to fully finish.
This commit increase them accordingly.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This new application is monitoring the Vbat in Volts
from the internal ADC.
Running on the nucleo_g071rb and nucle_wb55rg boards.
Vref is a property of the ADC.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Replace calls to nrfx_gpiote functions deprecated in nrfx 2.6.0
with recommended equivalents.
On the occasion, switch to using available `nrfx_gppi_*` functions
instead of separate paths for DPPI and PPI channels.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add overlay for espressif boards that does not have a built-in LED.
Add instructions on README file about the required LED connection.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
This commit moves the hardware configuration for ledc
peripheral to the device-tree instead of Kconfig.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
This commits prefixes all the definitions
with 'SPI_' to be used by the sample application.
This will avoid compilation conflict especially
on FLASH_SECTOR_SIZE.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The BT_CODEC_LC3_CONFIG_* macros had a hardcoded location
and context, which makes them a lot less usable.
Updates the macro, and the macros that used them.
This also removes the BT_CODEC_LC3_CONFIG and instead
just uses the BT_CODEC_LC3_CONFIG_N macro, which has
then been renamed to BT_CODEC_LC3_CONFIG.
As an addition, the macros and their input has
also been better documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample depends on lvgl, so do not try and build it if lvgl is not
part of the workspace and if it was excluded in a local manifest.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a new sample application that demonstrates using the RTIO subsystem
to read periodic sensor data directly into buffers allocated by the
application, asynchronously process batches of data with an algorithm,
and recycle buffers back for reading additional sensor data.
The sensor iodev in this application is an timer-driven device that
executes one read request per timer period. It doesn't actually send any
transactions to a real I2C/SPI bus or read any real data into the
application-provided buffers. This timer-driven behavior mimics how a
real sensor periodically triggers a GPIO interrupt when new data is
ready.
The sensor iodev currently uses an internal message queue to store
pending requests from the time they are submitted until the next timer
expiration. At least one pending request needs to be stored by the iodev
to ensure that it has a buffer available to read data into. However,
any more than that should probably be handled by the application, since
it's the application that determines how often it can submit new
requests and therefore how deep the queue needs to be.
The sensor iodev is implemented to support multiple instances with
devicetree, but additional work remains to enable and use more than one
in the application.
Tested on native_posix and frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Replace 'platform_allow' with 'filter' based on ws2812 compatible
being enabled. This will allow, for example, to run the sample on
mimxrt1050_evk and mimxrt1050_evk_qspi boards.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
If we enable DISPLAY=y, ILI9341 will be selected automatically if all of
its dependencies are met as well (SPI), let's add this to the board
defconfig.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
LVGL eats a considerable amount of flash, so tests may fail on platforms
that meet all requirements but that have a low amount of flash, e.g.
nucleo_g071rb. Set min_flash for all cases to 250K (result of some quick
experimentation). Also update minimum ram to exclude platforms that
cannot run Zephyr + LVGL (e.g. those with just 16K).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
'display' harness doesn't exist, so replace it with 'none' to make
things more clear. It is required so that test is not run e.g. on CI,
test would timeout because the GUI is left ON forever.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify sample.yaml by just adding a single test case. In future
commits, test case will be refined to be based on DT filters so that it
is made more generic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some of the Panasonic's evaluation boards have limited amount of pins.
So not all arduino pins can be occupied and not all shields are
compatible.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Some TFM samples run different test suites/cases based on
which configurations are set.
Enumerate more of these.
For samples/tfm_integration/tfm_psa_test,
add the following new build configurations:
* Add CONFIG_TFM_PSA_TEST_STORAGE
* Add CONFIG_TFM_PSA_TEST_CRYPTO
* Add CONFIG_TMF_PSA_TEST_INITIAL_ATTESTATION
For samples/tfm_integration/tfm_regression_test,
add this to all build configurations:
* Add CONFIG_TFM_PARTITION_PROTECTED_STORAGE
* Add CONFIG_TFM_PARTITION_INTERNAL_TRUSTED_STORAGE
* Add CONFIG_TFM_PARTITION_CRYPTO
* Add CONFIG_TFM_PARTITION_INITIAL_ATTESTATION
* Add CONFIG_TFM_PARTITION_PLATFORM
* Add CONFIG_TFM_PARTITION_AUDIT_LOG
And build the above for CONFIG_TFM_IPC as well.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Extra steps for programming the external memory on nRF5340 DK are
no longer needed. Now west is capable of handling this itself.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Despite the comment it contains, the initialization procedure for
the external memory chip on nRF5340 DK does not enable the High
Performance Mode in the chip, so communication using a frequency
higher than 8 MHz fails and the sample crashes (it works only right
after programming the chip with nrfjprog, which enables the High
Performance Mode, but the chip returns to the Low Power mode after
the board is power-cycled).
This commit fixes the initialization procedure and performs some
additional clean-up.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In the Zephyr implementation, `sem_timedwait()` uses a
potentially wildly different timebase for comparison via
`k_uptime_get()` (uptime in ms).
The standard specifies `CLOCK_REALTIME`. However, the real-time
clock can be modified to an arbitrary value via clock_settime()
and there is no guarantee that it will always reflect uptime.
This change ensures that `sem_timedwait()` uses a more
consistent timebase for comparison.
Fixes#46807
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Renaming objects which had 2 in the name to indicate that
it is v2 specific. Once logging v1 has been removed such
suffixes are redundant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch modifies the ADXL362 driver to use the new
SENSOR_TRIG_MOTION trigger for activity detection
and SENSOR_TRIG_STATIONARY for inactivity detection.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
