Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to pass 'struct device' instead of a 'char *'. This lets us move
from device_get_binding to DEVICE_DT_GET.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Note: the CONFIG_COUNTER_CMOS driver is devicetree based so we can
remove the hardcoded "CMOS" and use DT_COMPAT_GET_ANY_STATUS_OKAY.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to pass 'struct device' instead of a 'char *'. This lets us move
from device_get_binding to DEVICE_DT_GET.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove mt9m114 from dtsi is a video driver and not a sensor. The
sensor build_all test didn't actually build this driver and we have
coverage now from the video build_all test for it.
Signed-off-by: Kumar Gala <galak@kernel.org>
This commit changes the pin assignment for the gpio_basic_api
test case because A0 was conflicting with the testcase
tests/drivers/dac/dac_loopback.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Convert test to use DEVICE_DT_GET instead of device_get_binding
to help phase out use of DT_LABEL/DT_BUS_LABEL.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Seeed XIAO BLE is a tiny (21 mm x 17.5 mm) Nordic Semiconductor
nRF52840 ARM Cortex-M4F development board with onboard LEDs, USB port,
QSPI flash, battery charger, and range of I/O broken out into 14 pins.
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Adds support for running the wdt test on the Raspberry Pi Pico by
increasing the window size and disabling timeouts.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Also, fixed issue that change exposes with SEGGER RTT testing
in that in some platforms the device getting selected for the
RTT test was not the RTT device.
Signed-off-by: Kumar Gala <galak@kernel.org>
This commit adds the necessary changes to build w1-devices using
the vnd,w1 dummy driver in the build_all test case.
Additionally, definitions for the ds18b20 1-wire temperature sensor
are added.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds basic api tests for the w1 driver.
These tests mostly make sure that everything compiles without
errors. They expect a w1-bus configuration without any connected slave.
No bidirectional read/write tests are executed.
Send tests simply send without verifying the output,
and receive tests expect an idle bus(receiving only logical ones).
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Running the testcase dac loopback on the nucleo_g071rb
target board.
The ADC1 in0 on PA0 (pin A0), the DAC1 out1 on PA4 (pin A2)
must be connected on the HW.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit adds a test case that configures an alternative clock source
for an ADC peripheral.
In case no alt clock is available, only the gating clock is enabled
and disabled.
Unlike the i2c and lptim test, the actual gating clock frequency is
not checked, because for the adc there seems to be no uniform way
to retrieve the frequency via the hal.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
For the STM32G0, STM32G4, and STM32WL enable the adc node in one
configuration, and select the PLL_P output as its clock source.
PLL_P divider is chosen to be 20 to make sure it's a unique frequency.
- g0, and g4 have pll as sysclk
- wl has hse as sysclock
The test configurations and the overlay-files are renamed accordingly.
All overlays that don't specify an alternative clock source still
make sure that the adc node is "okay" to be able to perform basic test.
The basic test only turns on and off the gate clock without checking the
frequency.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The test checks if the peripheral gating clock was correctly disabled
after the test, but accidentally the I2C_CLK was checked instead of the
LPTIM_CLK.
This commit fixes this by using __HAL_RCC_LPTIM1_IS_CLK_ENABLED instead.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The nucleo_wl55jc according to the datasheet does have a
NT2016SF-32M-END5875A 32MHz TCXO as HSE, therefore needs
enable the "hse-tcxo;" property to work, this was not the case
for the clock_configuration/stm32_common_devices test cases.
Additionally, remove the comment about about ST-Link clock,
because the source is the tcxo and not the ST-Link.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
uart_async test and spi_loopback test require UART and SPI
with an ASYNC option.
The SAM0 UART/SPI driver requires configuring DMA support.
Arduino MKRZero is not DMA configured like other SAM0 boards.
We exclude it from the tests.
ea36f9b and f4c5bdf already exclude other SAM0 boards from these tests.
Arduino MKRZero also followed these PR policies.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Changes:
- Copied over board files for blackpill_f401ce
- Changed appropriate soc dtsi from stm32f401Xe.dtsi to stm32f401Xc.dtsi
- Replaced any instance of F401CE to F401CC
- Added blackpill_401cc to adc test
In essense the blackpill_f401ce and blackpill_f401cc are the exact
same boards,
the f401cc variant of the stm32 mcu has lesser sram and flash than
the f401ce.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Add disk performance test, to report performance of disk devices. This
test reports performance for single sector R/W, sequential read/writes,
and an IOPS score based on random 512 byte reads and writes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Rename disk driver test to disk_access, as multiple disk tests exist.
Disk access test is intended to verify disk functionality.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
