The CAP acceptor can now be a set member. This allows
the CAP acceptor to register a CSIS instance and include
it in the CAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable the CAP acceptor for the audio shell configuration
and the babblesim test cases.
Enabling CAP does add some additional requirements, and if
a BAP unicast client attempts to use it without conforming to
those requirement, it won't be able to update the metadata.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the existing bt_micp API for the
MICP Microphone Device to be more specific
by adding mic_dev as an infix. This follows
the naming scheme used for the MICP microphone
controller (mic_ctlr).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the profile abbreviation, MICP, instead of the
service abbreviation, MICS, for the MICP implementation.
The server implementation will use MICP and the client
implementation will use MICP_CLIENT for now, as that will
be updated in a future commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The HAS depends on the unicast server, and should be
disabled in the `no_unicast_server` as well as depend
on the CONFIG_BT_AUDIO_UNICAST_SERVER config.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
error: 'CONFIG_BT_TBS_MAX_PROVIDER_NAME_LENGTH' undeclared (first use
in this function); did you mean
'CONFIG_BT_TBS_CLIENT_MAX_PROVIDER_NAME_LENGTH'?
292 | CONFIG_BT_TBS_MAX_PROVIDER_NAME_LENGTH);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| CONFIG_BT_TBS_CLIENT_MAX_PROVIDER_NAME_LENGTH
etc.
This fixes build errors that were seen while building call control
client without server side (`CONFIG_BT_TBS`) enabled.
The options like BT_TBS_CLIENT_MAX_URI_LENGTH and
BT_TBS_CLIENT_MAX_PROVIDER_NAME_LENGTH have been removed because those
were not used in the code. In fact the client implementation used the
common options for BT_TBS_MAX_URI_LENGTH and
BT_TBS_MAX_PROVIDER_NAME_LENGTH that were moved in this patch to the
common Kconfig section.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Remove the explicit enable of Extended and Periodic
Advertising support in Controller, the feature is no
longer experimental in the Controller and is now enabled
by default when application uses them by enabling as
Host feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add two new Kconfigs: BT_ISO_CENTRAL and BT_ISO_PERIPHERAL
that is used to do central or peripheral only builds,
similar to the BT_CENTRAL or BT_PERIPHERAL Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Truncate strings being notified to fit the ATT_MTU, to prevent
notifications from not being delivered due to being too long.
For now uses the minimum ATT_MTU, as the MCS does not yet track
connections.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Add Kconfig file for the media proxy, for high-level media control
configuration.
The media proxy did not have a Kconfig file, it was relying on the
Kconfigs for GATT media control client and server.
The purpose is to unify the media control configurations, to make the
different media control functionalities available separately, and to
separate the high-level media control from the bluetooth media control
server and client.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Separate out the Kconfig for the media player.
Also removes some unused MCS configs.
The media player has been using MCS configs, while it should be the
other way around.
Also, this will make it easier to move the media player elsewhere, as
has been discussed.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Merge Kconfig file for OTS server and client.
Rename the client config from _OTC to _OTS_CLIENT
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Remove the BT_AUDIO_DEBUG Kconfig option.
Given that all the audio modules are guarded by the BT_AUDIO config,
it seems excessive to also have a separate guard for audio module
debug. It is sufficient that this is turned on/off module by module.
Note that the BT_AUDIO_DEBUG was also located in the wrong file - the
babs Kconfig file, not the main Kconfig file.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Add support for the BAP broadcast sink role. This role
allows a device to sync to a broadcast ISO stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BAP unicast client implementation. This role
can discover BAP unicast server services and initiate
BAP audio streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the Basic Audio Profile (BAP) unicast server
functionality. This allows a device to act as the
unicast server role, which can accept unicast streams
initiated by a unicast client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the L2CAP buffer count, for the media control shell to work.
(The buffer count was set to an even higher value in the
topic-le-audio branch, but that setting was not upmerged.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The le-audio host shell enables extended advertising. Therefore, for
the shell to be usable, extended and periodic advertising must also be
enabled for the controller.
The controller configuration are added to board-specific files for the
time being, as the advertising features are still experimental
upstream.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the configuration file to use BT_FILTER_ACCEPT_LIST
instead of the deprecated BT_WHITELIST.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove option CONFIG_USB_UART_CONSOLE where it has no influence
or enable CONFIG_SHELL_BACKEND_SERIAL_CHECK_DTR without taking
a detour through CONFIG_USB_UART_CONSOLE.
Check the compatibility of chosen property instead
of usage of CONFIG_USB_UART_CONSOLE option.
Align how to wait for the readiness of CDC ACM UART.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable ISO (unicast and broadcast) for the BT shell.
This allows users to use the ISO features (if supported by
the controller) in the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add entries for media control builds to testcase list. This is a part
of the upmerge of media control from the topic-le-audio branch.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Upmerge of the project settings for media control from the
topic-le-audio branch.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
audio.conf changes
Adds the coordinated set identification service (CSIS) client.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) server.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the LE audio configuration to a new audio.conf file
in the bluetooth shell project, similar to the mesh.conf
file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the connected ISO API to be more
similar to the broadcast ISO API as well
as the HCI spec.
This updated API allows for more flexibility
and will better support scenarios such as true
wireless setup, as ISO channels and connections
are more independent now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Update USB configuration and test case.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
