Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
NS16550 driver no longer relies on definitions found in <soc.h>, SoC can
select UART_NS16550_ACCESS_IOPORT instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add nSIM-based (simulator) boards with
* nsim_hs5x - single core ARCv3 HS5x 32 bit CPU
* nsim_hs5x_smp - SMP, two core ARCv3 HS5x 32 bit CPU
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
soc_config.c for snps_nsim had no actual code, just a bunch of includes.
Deleting as it has no value (and triggered a compliance warning because
file had no newline at EOF).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all soc code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Currently we use incorrect memory layout for SMP boards as
we put data (which need do be accessible from all cores) to
DCCM which is private for each CPU core.
This works for nSIM which doesn't simulate CCMs (as we don't pass
corresponding nSIM options for SMP configurations) however
it won't work if we run that code on real HW (we want to achieve
that nSIM configurations are also runnable on HAPS - FPGA platform).
Let's fix that issue by using DDR instead of CCMs for SMP
configurations (nsim_hs_smp and nsim_hs6x_smp).
While I'm at it - switch UP HS6x configuration (nsim_hs6x)
for DDR usage instead of CCMs - to make that configuration closer
to the HAPS config we have.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
ARC_HAS_ACCL_REGS should set to y to protect ACCL and ACCH registers
during irq. These registers could be used as GPRs by compilers and
therefore need store/restore during irq.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
We add support of mpu v6 therefore it is needed to have a board to
validate that feature. This commit add a new HS nsim simulator
which supports mpu v6.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
some mwdt compiler options not support cmake function
check_c_compiler_flag, let's add mwdt compiler options for
hsdk boards without check.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
arcmwdt toolchain has various pre build libraries, we can find it in
path: {METAWARE_HOME}/lib, and it will use av2em lib by default.
it's OK for em boards, but not suitable for hs boards. I have tested
hs38_full library for hs boards, it's OK. let's use it.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Add QEMU board with single core ARCv3 HS6x 64 bit CPU
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Don't allow user to choose CPU_ARCEM / CPU_ARCHS options
but select them when exact CPU type (i.e. EM4 / EM6 / HS3X/ etc)
is chosen.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
ARC mpu version used a wrong number 3, could cause conflict in future.
This commit fix this issue to version number 4.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This allows to get much more reproducible results in terms of
amount of tests passed & failed.
But note it requires QEMU for ARC with icount support!
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The new APIs are not only dealing with cache flushing. Rename the
Kconfig symbol to CACHE_MANAGEMENT to better reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
As discuss in PR #28805, sloppy idle function still has some bug and
barely used, so we can remove it safely.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
0.5 Mhz with 100 ticks per sec leaves 5000 cycles per tick,
which broke some tests that assumed more work within 1 tick.
Set to 1 Mhz: balance multi-core simulation speed and tick duration.
Fixes#27943
Signed-off-by: Ruud Derwig <Ruud.Derwig@synopsys.com>
Typically we have ARC core configurations where Fast IRQs (FIRQ) are
enabled together with multiple register files and those we have covered
by testing. But FIRQ & single register bank we only happen to have on
the older EMSK v2.2.it might be a good idea to add a similar
configuration to nSIM "boards" so that we keep it tested regularly.
nsim_em7d_v22 configuration is similar with em_staterkit_em7d_v22,
both configed with FIRQ & single register bank.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
unify how XIP is configured across architectures. Use imply instead of
setting defaults per architecture and imply XIP on riscv arch and remove
XIP configuration from individual defconfig files to match other
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
emsdp_em7d_esp is a board with secure just like em_starterkit_em7d,
but the secure feature not configed in defconfig file. we need to add
below configs in emsdp_em7d_esp_defconfig files:
CONFIG_ARC_HAS_SECURE=y
CONFIG_TRUSTED_EXECUTION_SECURE=y
when secure feature enabled, we use secure timer for system tick, so
we need to add below macro for secure timer:
#define IRQ_SEC_TIMER0 20
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Now when we're finally ready to open QEMU port for ARC
we introduce the first ever platform it supports and in fact does
that quite well - Zephyr RTOS.
For now we only offer support of basic EM & HS code execution,
built-in timers, interrupt controller and set of very simple
peripherals: DW UART & optionally MMIO Virtio devices.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
emsdp is a FPGA based platform, can be loaded with different
configurations. Different configuration have different
interrupts:
* em5d, em7d and em11d have 111 interrupts
* em4 and em6 have 113 interrupts
* em7d_esp has 112 interrupts
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert linker scripts and arc_mpu_regions.c setup to use new
devicetree.h macros to extract the base address and size of the various
memory regions (DDR, SRAM, FLASH, DCCM, ICCM). We also remove the
scaling up and down since DT_REG_SIZE() returns the value in bytes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_SNPS_ARCEM_0_CLOCK_FREQUENCY with a PATH based reference
to cpu@0 (DT_PATH(cpus, cpu_0)) and than getting the clock_frequency
property:
DT_SNPS_ARCEM_0_CLOCK_FREQUENCY ->
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from DT_MMIO_SRAM_10000000_BASE_ADDRESS to
DT_REG_ADDR(DT_NODELABEL(ddr0)) and similar for
DT_MMIO_SRAM_10000000_SIZE to DT_REG_SIZE().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
