Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
hifive_unmatched has a jedec,spi-nor flash node, however we have no
SPI driver for the controller so exclude the platform from this sample.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add an overlay for rpi_pico board to the led_pwm sample.
This board only supports fairly high pwm frequencies so
the blinking of the LED is not supported. Turning it on/off
and fading is.
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
As we phase out usage of 'label' devicetree property, remove uses
of DT_LABEL. Replace DT_LABEL with swN_spec.port->name.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample should be executed only when connecting external
hardware (Led strip). Thus it is necessary to add fixture to avoid
execution when no hardware is connected.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This sample can only be tested if the DUT has external memory
connected. This commit aligns the yaml description, so the test
is not picked up on setups without required fixture.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit moves the hardware configuration for ledc
peripheral to the device-tree instead of Kconfig.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
This commits prefixes all the definitions
with 'SPI_' to be used by the sample application.
This will avoid compilation conflict especially
on FLASH_SECTOR_SIZE.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Replace 'platform_allow' with 'filter' based on ws2812 compatible
being enabled. This will allow, for example, to run the sample on
mimxrt1050_evk and mimxrt1050_evk_qspi boards.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Some of the Panasonic's evaluation boards have limited amount of pins.
So not all arduino pins can be occupied and not all shields are
compatible.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Whenever MBEDTLS_BUILTIN is selected then
CONFIG_MBEDTLS_CFG_FILE="config-tls-generic.h" is set as a default value.
Remove explicit configuration from prj_mtls_shim.conf.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Inform about the requirement to configure ADC channels in Devicetree
- Fix sample output example
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Improve include list, so that file is self-contained
- Don't use an array type for the samples buffer, as its length is 1
- Improve some error messages
- Use PRId16/32 for printing fixed-width signed integers
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify sample by relying exclusively on channel data from Devicetree.
This change makes sample simpler and more portable at the same time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is now possible to configure ADC channels in Devicetree. This makes
code more portable, since there is no need to hardcode hardware specific
bits in the C sources.
This patch adds channel/s configuration for all support sample overlays.
Hardcoded values have been used:
- Resolution: 12-bit
- Gain: 1
- Reference: internal
- Acquisition time: default
Some nRF channels have been adjusted to include resolution as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is a follow-up to commit f5ffd05e6b.
Since twister removes leading spaces from received lines before
further processing, the regular expression for checking the output
produced by the sample cannot contain such space. Also negative
values read from ADC channels need to be allowed.
For consistency, remove the leading space also in the actual string
printed by the sample.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit fixes the stale reference to the devicetree
`clock0@82005000` node, which was changed in the commit
7b601b7f50.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
off_t is often unsigned long, which means printf needs to use %lx. Insert
a cast in case the value is unsigned int.
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The sample did not have defined pass condition and was failing
due to a timeout. Add harness: consol and an explicit regex matching
the sample's output so it can pass on a hw. In addition, a requirement
for a gpio_loopback fixture was added to the sample.yaml.
fixes: #45229
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Define the configuration through an overlay file
to run the sample on the nucleo_h743zi target board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
On the stm32l073rz nucleo and stm32f091rc nucleo
boards, the DTS pwm-leds node is disabled, because
the output pin might conflict with SPI1.
It is necessary to enable the node in the overlay
to compile and run the sample.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
integration platforms can't be filtered out, adapt tests so that those
platforms are always available for testing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The overlay for the nRF52840 DK board uses ADC controller child nodes
for specifying channel configurations and it shows how to configure
a channel in differential input mode, so it can serve as an example
of how to use these new possibilities. The overlay for the nRF51 DK
board shows how to use a specific ADC resolution (the default 12 bit
setting is not supported by nRF51 SoCs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Allow specifying configuration of channels through child nodes of ADC
controllers. This way analog inputs can be specified for channels in
SoCs that require this and it is also possible, for example, to use
different gain or reference selections for particular channels.
This commit also removes a few former limitations of the sample: now
it is possible to use more than 2 channels and each channel can use
a different ADC controller. Also the ADC resolution to be used can be
specified through devicetree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This add a new sample application to test and validate
the stm32 octospi driver on the NOR octo-flash present on
stm32 disco kits
There should be a special case to erase the complete flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Increase the heap size for RT1170 EVK to allocate the
display buffers for a 720x1280 display
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Convert the can_mode enum to a bit field to prepare for future extensions
(CAN-FD mode, transmitter delay compensation, one-shot mode, 3-samples
mode, ...).
Rename the existing modes:
- CAN_NORMAL_MODE -> CAN_MODE_NORMAL
- CAN_SILENT_MODE -> CAN_MODE_LISTENONLY
- CAN_LOOPBACK_MODE -> CAN_MODE_LOOPBACK
These mode names align with the Linux naming for CAN control modes.
The old CAN_SILENT_LOOPBACK_MODE can be set with the bitmask
(CAN_MODE_LISTENONLY | CAN_MODE_LOOPBACK).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
LCD display is connected to the I2C bus SoC bus in the development kit,
this sample guides the user on how to use the LCD display with I2C commands
Signed-off-by: Esteban Valverde <esteban.valverde.vega@intel.com>
Add pinmux settings for lpadc to LPCXpresso55s69 and LPCXpresso55s28
boards. Enable ADC driver sample for LPCXpresso55s69, to aid in testing
pinmux settings.
Fixes#45401
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
