Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
Add a define for invalid Extended Advertising SID value of
255 required when generating legacy advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth 5.3 specification was recently released, and
has a new version identifier (12) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Add the ability to perform a write on the object name GATT
Characteristic with a notification callback to the application
that the name has been written.
In order for this operation to work the memory backing the
object name must be modifiable. To prevent forcing the user
to always allocate 120 bytes for the name, the maximum name
length is changed from a define to a configuration parameter.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove the bt_conn pointer from the AICS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a function for the VCS client that gets the bluetooth
connection pointer if a given VCS client instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the VCS API to use the bt_vcs struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_vcs_discover so that a client
will get a bt_vcs pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_vcs struct that represents a VCS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the MICS API to use the bt_mics struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_mics_discover so that a client
will get a bt_mics pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_mics struct that represents a MICS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Expose a helper function to the application that searches the local
database for the given attribute from its UUID.
Provide arguments to limit the search that matches the service
declaration to make it easy to limit the search to a specific service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow to pass attribute as NULL pointer when using notify or indicate by
UUID. This will use the entire handle value range to search for an
attribute with a matching UUID.
Document optional parameters, and clarify attr and uuid usage in the
variable declaration in the struct for clarification.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document that calling settings_load is required when the application is
not creating and managing the identities of the stack itself.
The application will not be able to use all features of the stack before
the identities have been loaded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename the struct from bt_vcs to bt_vcs_included, and
rename bt_vcs_get to bt_vcs_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_vcs as
an opaque pointer to a VCS service instance (local
or remote) to match the service instance pointers of
AICS and VOCS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_mics to bt_mics_included, and
rename bt_mics_get to bt_mics_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_mics as
an opaque pointer to a MICS service instance (local
or remote) to match the service instance pointers of
AICS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the packet status flag value to the iso receive info
struct. This will allow an application to handle potential
lost or erroneous messages.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This aligns provisioner and provisionee APIs in terms of endianess
of public key provided by an application.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit allows an unprovisioned device to exchange its public key
using out-of-band techology (see MeshPRFv1.0.1, table 5.19 and section
5.4.2.3).
For in-band public key exchange, the mesh stack uses HCI commands to
generate public and private keys, and DH key. This, however, doesn't
work for OOB public key exchange since there is no command to generate
DH key with a private key provided by an application. Therefore, this
commit adds direct usage of TinyCrypto into the mesh stack for DH key
generation for OOB public key support.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Align name of bt_hci_cp_le_set_cl_cte_tx_params::ant_ids
to other direction finding related commands.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of events: HCI_LE_Connection_IQ_Report and
HCI_LE_CTE_Request_Failed for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Connection_CTE_Response_Enable
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Receive_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove the bt_conn pointer from the VOCS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added an API to the HCI header that can be used to retrieve
advertising handle information from a given advertising set.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit implements the microphone input control service
(MICS) and client, The implementation supports and uses the
Audio Input Control Service (AICS) secondary service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a new callback structure to `<gatt.h>` for receiving notifications
of ATT MTU updates. This callback is called regardless of whether the
MTU update was initiated locally or remotely.
Fixes#32035.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The current iso commands in the shell only supports setting up
a bidirectional stream or unidirectional for central role.
Adding rx/tx/rxtx option to iso listen command to allow for
peripheral side configuration of an iso connection.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
The sequence number is needed in the appliaction layer to detect lost
packets in the ISO stream in cases where the timestamp is not included.
(Sequence number is mandatory to include where timestamp is optional).
The API for the public metadata have been moved to a public header file.
As the size of the ISO meta data exceeds the default 4 octets net_buf
user_data the public ISO metadata have been moved into a seperate array.
The internal metadata is still stored in net_buf user_data.
This also fixed the user_data overflow on 32 bit systems, caused by
writing the ts into user_data on index 4 to 7, which is outside the 4
allocated bytes.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Fix issue is host handling of connected and disconnected event.
Since the host wants the disconnected event to be processed as a
priority event as well as in reguler event context while the connected
event is always in reguler event context we can end up in a situation
where the disconnected priority event is processed before the connected
event.
Since the disconnected priority event is there to release unack'ed TX
pending on the connection in case the RX thread is blocked waiting
for TX resources, we need to keep this behavior. Otherwise this would
be a potential deadlock of the RX thread waiting for resources that can
only be released by the RX thread.
When this situation happens we know that there cannot be any pending TX
on this connection so we can safely skip releasing of unack'ed TX.
The second thing the disconnected priority event does is marking the TX
path on the connection as disconnected. We need to do the same in this
situation, so we make sure that the TX path is already marked
disconnected when providing the connected callback to the application.
This fixes a regression from 4be66bd33d.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add check for the advertising already being enabled when attempting to
start the advertising set.
Document that the advertising set cannot be started from the connection
connected callback, and instead has to be started from the advertising
set connected callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
