Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This add a removes the SPI config
for the stm32H735 and stm32H7b3 disco boards
when testing the octoSPI.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that SPI drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
In order to keep a flashed sample from provisioning forever, the sample
requires the user to press a button to provision a detected device.
The feature is only enabled if the board has a push button connected
via GPIO.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Flash controller has been specified by `zephyr,flash-controller`
chosen DTS, which does not have to be the same controller as
a flash area exists on.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Due to introduction of alias spi-flash0
sha1: 64fbbd9a44
it is necessary to keep quadspi node
Instead of removing quadspi node, remove storage_partition node
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Sample code uses GPIO api's but wasn't enabling CONFIG_GPIO. So
on native_posix this would cause the sample to not build. Add
CONFIG_GPIO=y to prj.conf to fix this.
Fixes#48306
Signed-off-by: Kumar Gala <galak@kernel.org>
This is not a sample of an audio subsystem in zephyr, it is a sample
that completely depends on sof and its audio support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sensor Kconfig sybmols should be enabled if CONFIG_SENSOR=y
and the devicetree node for the sensor is enabled. We can
remove explicitly enabling specific sensor drivers in .conf
files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update sample to use DEVICE_DT_GET_ONE to remove usage of
device_get_binding. Additionally simplfy the sample to
just access a single TH02 device.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move from using Kconfig OSDP_UART_DEV_NAME to a devicetree
chosen property ("zephyr,osdp-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Changed the integration platform for the osdp samples to
stm32_min_dev_black as it already has zephyr,osdp-uart set.
Signed-off-by: Kumar Gala <galak@kernel.org>
The sample requires a manual user interaction. Make CI skipping that by
requiring a remote harness (the user).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This change the applications to get device from the
compatible of the zephyr_udc0 node.
It is defined by the DTC_OVERLAY_FILE="app.overlay"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The driver has be DT_INST based for a while so the Kconfig
symbols CONFIG_UART_RV32M1_LPUART_<n> aren't used. So lets
remove them.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update sample to use DEVICE_DT_GET_ONE to remove usage of
device_get_binding if the device is devicetree based.
Signed-off-by: Kumar Gala <galak@kernel.org>
We get the following error message from twister:
ERROR - samples/boards/arc_secure_services/prj.conf:
can't find: cannot mmap an empty file
Fix by removing the empty file.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move from using Kconfig TRACING_BACKEND_UART_NAME to a devicetree
chosen property ("zephyr,tracing-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove if-def since io-channels is a required property of
the voltage-devider compatible so the else case won't happen.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Fix building this sample on bl5340_dvk_cpuapp_ns and
pinnacle_100_dvk. On these boards the NORDIC_QSPI_NOR
driver needs to be enabled for the sample to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add alias to overlays for boards that switch the watchdog to be
used while running this sample.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Add alias to boards with watchdog enabled to facilitate the
move of samples/drivers/watchdog to use DT_ALIAS.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
The unicast client will now read the PACS location value
during the discovery procedure, as well as subscribing to
it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for running the SocketCAN sample on
native_posix/native_posix_64 using the CAN loopback interface.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
Merge the fpga_controller and fpga_controller shell
sample applications and add sample.yaml to enable testing in
twister.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
