A macro introduced allows to log four-character-codes (FOURCC) as one
string instead of enumerating each individual character. This saves a bit
of room in the code and is less error-prone.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The HCI IPC driver is not reliable and can lead to lost ACL data if
built without Controller-to-Host ACL flow control.
This commit prevents building HCI IPC driver and hci_ipc sample without
CONFIG_BT_HCI_ACL_FLOW_CONTROL.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Replace a few references to native_posix / the native_posix ethernet
driver with native_sim, or native_tap.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename this driver to eth_native_tap, including renaming all its
options.
The old options remain until v4.4, but as deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME with the equivalent for
native_sim NATIVE_SIM_SLOWDOWN_TO_REAL_TIME.
native_sim accepted transitionally NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
to ease porting from native_posix, but this option is being deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adding board bbc_microbit_v2 overlay to pong example. This change
mainly enables to buzzer functionality of the example.
Signed-off-by: João Castilho <jpccastilho1999@gmail.com>
Almost all overlays only enable NVS and SETTINGS_NVS, something that
should be enabled in sample directly. Remove all overlays and make the
sample more genenric.
Use filter on storage partition to enable testing the sample on more
plaforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, the soc/stm32/ccm.ld is not handled in
CMAKE_LINKER_GENERATOR.
This commit adds support, making STM32 supportable by
alternative linkers such as AC6 and IAR.
This commit also renames a variable to match all other
LOADADDR symbols.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
Lookup the address of the SNTP server through DNS instead of requiring
a server to be running locally.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Networking events may have been triggered before `wait_for_network` was
called. Resend the status events after the callbacks have been
registered.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This board does not have Flash support enabled yet.
Re-enable this sample once Flash and MCUboot support is
added.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
For the CCM mode, increase slightly the output buffer size because
the cc23x0 directly fills this buffer with 16-byte blocks.
This prevents from doing unnecessary memcpy that would have an
impact on the driver's performance.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Add a Kconfig BT_LIMITED_DISCOVERABLE_DURATION to set the timeout for
limited discoverable mode.
Add a argument `limited` to function `bt_br_set_discoverable()` to
support the limited discoverable mode.
When enabling discoverable mode with `limited` is true, both write
LIAC and GIAC to controller and set the bit 13 of COD in function
`bt_br_set_discoverable()`. And start a delay worker with the timeout
CONFIG_BT_LIMITED_DISCOVERABLE_DURATION to disable the discoverable
mode.
When disabling discoverable mode, only set GIAC to controller and
clear bit 13 of COD.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Use `k_sem_take(,K_FOREVER)` in the main thread to keep it sleeping
while worker threads are running. The last worker thread to finish
calculation wakes up the main thread.
Signed-off-by: William Tambe <williamt@cadence.com>
include the use of callback registration to handle descriptor
whenever `FragSessionSetupReq` is sent from fuota server.
Signed-off-by: Kiara Navarro <sophiekovalevsky@fedoraproject.org>
Extend several flash samples and tests so that they can also be used
with "jedec,mspi-nor" devices.
Add configurations needed for the nrf54h20dk/nrf54h20/cpuapp target.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
No reason for this sample to be build_only, it can run and be verified
just fine on the right platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
native_posix has been removed from the tree. So there is no
need to support it anymore in this sample code.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The UAC2 samples do not work with Windows UAC2 driver because:
* driver does not support implicit feedback
* driver expects wMaxPacketSize equal 4 on Full-Speed device
The only correct place to solve these issues is the Windows UAC2 driver.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
- fix unwanted "Error: Something went wrong at iteration 0".
- the loop_cnt check has no sense for iteration 0,
comparing with wrong -1.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
sample.sensor.accel_trig.shield-tap has a DT overlay that expects the
presence of an arduino_header, so add the appropriate dependency to only
build the sample against supported boards.
As per samples guidelines, use platform_allow to limit CI to run only on
a configuration that's actually been tested (and is documented in the
README)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Default in Twister is 32K, but 16K is a more "reasonable" goal and allows
to build hello_world against some of the most constrained boards in-tree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a console harness to check that the example has
started successfully.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
This updates the documentation of all the EnjoyDigital boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
We need to track the self-powered status of the device independently of
the D6 bit in the bmAttributes value of the configuration descriptor
because the Get Status request about the self-powered status is valid in
address state and we support multiple configurations.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
- adds ability to change the ZMS sample MAX_ITERATIONS
and DELETE_ITERATION parameters via Kconfig without manually
modifying the source code.
- adds ability to reduce flash memory wear on real devices
by reducing the number of write iterations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
native_posix is deprecated and will be removed in 4.2
Run this sample in native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample could not run on any target as it depedend on zms
which is set by no board.
But it seems to run just fine in both allowed platforms,
so let's add a trivial twister check (so it actually passes instead
of waiting for ever), and remove that `depends on`.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is deprecated and will be removed in 4.2
Run this sample in native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Now that `SECURE_STORAGE` does not `select` dependencies, they need to
be enabled explicitly by the tests.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This driver was deprecated and must be removed by Zephyr version
4.1 according to lifecycle/release guidelines.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add the overlay file for the i.MX RT1064 EVK board.
The sample can be run on the i.MX RT1064 EVK board out of the box.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
