Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ANCOUNT has nothing to do with label count so remove the
original while loop and just go through all the labels until
we have read all of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is not possible with valid DNS messages but is possible if
we receive malformed DNS packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When verifying the parameters check NULL value separately.
This will avoid nasty warning message to be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Instead of just showing network interface pointer, print also
network interface index. This helps debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Zephyr platform does not support MAC retransmissions on its own,
so OT_RADIO_CAPS_TRANSMIT_RETRIES capability was removed.
It should not be enabled basing on IEEE802154_HW_CSMA support,
as these are quite seperate features. Current implementation
assumes that platform performs retransmissions on its own,
what is not provided and leads to lack of MAC retransmissions.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
CONFIG_NET_CONFIG_INIT_TIMEOUT should not only be available if
CONFIG_NET_CONFIG_AUTO_INIT=y. If *_AUTO_INIT=n then application
may wish to initialize net manually and still use configured
timeout.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
If the CONFIG_NET_CONFIG_AUTO_INIT is not set, then let application
to do the initialization manually. In that case the app should call
net_config_init_app() when it is ready to setup the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M server might modify the lifetime value while the device is
registered, hence it's needed to obtain the value directly from the
Server object instance, before each Register Update.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently, OpenThread builds produce warning from the OT logger module,
because we don't use one of the parameters provided by logger macro.
Explicitly mark the parameter as unused to prevent warnings being
thrown.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, the application could receive a duplicate CONNACK event, in
case the server rejected the connection at MQTT level (with an error
code provided with CONNACK message). A subsequent connection close (with
`mqtt_abort` for instance) would produce the duplicate event.
Fix this by reporting back to the MQTT engine, that the connection was
refused, so it can close the connection rightaway. Rework the event
notification logic, so that DISCONNECT event instead of a duplicate
CONNACK event is notified in that case.
Also, prevent the MQTT engine from notyfing DISCONNECT event in case of
socket errors during initial connection phase (i. e. before
`mqtt_connect` function finished).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Putting data to local buffer before transmission was removed
to optimize operation. Local buffering was not needed, as passed
buffer cannot be modified until sending is finished.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Currently, functions for poll sock_fds array management are buggy, in
case there is another socket open (for instance the socket for firmware
update download), it could get overwritten, if the LwM2M socket was
closed and re-opened in a meantime (e. g. on registration timeout).
Fix this, by appending new entries to the sock_fds in continuous manner.
In case of removal, the deleted entry is overwritten by the last one,
and the last one is cleared.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During FW update, the application expects a consecutive data stream.
Therefore retransmitted blocks shall not be forwarded to the
application, but ignored. In case blocks are received out of order,
return an error and do not handle this block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When FW update in PUSH mode is used, the firmware is encapsulated in the
TLV as an opaque data, according to the LMWM2M satandard, and then
sliced into blocks and transferred block by block in several
transactions. Therefore, the TLV header is only present in the initial
message.
Current implementation did not handle this case well, reporting errors
on consecutive blocks, therefore making the FW update in PUSH mode
broken.
This commit fixes this issue with following changes:
* The TLV is only assumed to be present in the initial block, while
consecutive blocks will be processed directly into the appropriate
handler,
* 32-bit variables shall be used whenever dealing with the opaque data
length, since the firmware size can easily exceed the 16-bit range,
* Additional information, required for the FW block transfer to work
properly were added to the block context structure,
* The application shall only be notified of the actual data length, and
not the total block size (the total TLV size including header).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When the dupplicate address detection mechanism is not used, we should
not wait for IPv6 address configuration. Because of the bug we are
waiting for it, when CONFIG_NET_CONFIG_MY_IVP6_ADDR is not set.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Remove the `sm_bootstrap_reg_done` function, which produced duplicated
logs. The bootstrap registration done event is already logged on state
transition. Additionally, in case bootstrap procedure took longer time,
the duplicated log message was printed on each `lwm2m_rd_client_service`
call (500 miliseconds by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The security object instance used should be cleared on engine reset,
otherwise we might end up using invalid object instance for the
registration (i. e. if the engine was restarted during the bootstrap
procedure due to socket errors, the registration attempt will use
bootstrap security object instead of finding a proper one).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During the bootstrap procedure, when Boostrap Finish was received, the
response message was not initialized properly, resulting in a socket
error (NULL pointer porovided) and the response not being sent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix compilation error when the DIAG module is enabled.
All core functionalities are provided.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
`addrlen` parameter is updated on each `recvfrom` call, indicating the
actual address length returned. In case both, IPv4 and IPv6 are used on
different sockets (i. e. on regular LWM2M socket and FOTA socket), the
returned address length will differ.
In case `from_addr_len` is not reinitialized on each iteration, the
value stored in the `from_addr_len` variable will eventually indicate
the smaller IPv4 address size, therefore resulting in a failure in a
consecutive call on an IPv6 socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Although LwM2M engine uses cooperative threads, the internal `send()`
implementation might trigger context switch when it calls a kernel
function, therefore resulting in `send()` call being entered from both
the LwM2M thread and the retransmit work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context should only clear messages it owns, not all of them. Since
both context (LwM2M and FOTA) share common message pool, they might
interrupt their operation otherwise (i. e. cancel retransmissions).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The FOTA socket was not closed when download finished or an error
occured.
Additionally, fix the socket fd verification (it was assumed 0 is not a
valid fd which is not correct).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case unsopported TLV type or malformed packet is received, the
`do_write_op_tlv` function will end up in an infinite loop. Prevent that
by returning an error code in case it does not recognize TLV type.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
