Added a callback that lets an application get write error
(if any) when subscribing to a gatt characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Fix option USE_IDENTITY for bt_le_ext_adv_* API.
The random static identity address that was set in bt_le_ext_adv_create
was overwritten in bt_le_ext_adv_start in the call to
le_adv_set_private_addr.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add the nRF52805-specific file with radio related defintions.
Use also specific configurations for certain PPI channels used by
the controller, as this SoC has limited number of programmable PPI
channels.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Change hard-coded (D)PPI channel bitfield values to the BIT() macro
calls with the corresponding channel base value supplied as parameter,
to make it possible to actually change this base value if needed.
Remove unused *_EXCLUDE macros.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
nRF5340 does have SWI peripheral, hence use it instead of
the single available EGU peripheral. Use of SWI will allow
controller's LLL, ULL_HIGH and ULL_LOW execution context to
be independently configured to different interrupt priority
levels.
When ULL_HIGH priority equals ULL_LOW priority, only SWI2
is used by controller. Otherwise, SWI3 is used for ULL_LOW.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Detect and handle AD data set race condition between thread
and ISR context.
Fixes#27637.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add cpu_dsb() hal interface so that data synchronization
barrier be used in ARM Cortex M4 and M33 architecture
implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Set the AD data double buffer first index as volatile
because it is modified in LLL ISR context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out into function the filling of sync info
structure in the common extended advertising payload format
header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out into function the filling of aux ptr structure
in the common extended advertising payload format header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out into functions the calculation of common
extended advertising payload format header length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Moved the assignment of PDU length out side of a conditional
so that code to calculate PDU length can be reused.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out sync info field population into a utility
function with set and clear interface to add or remove
the common extended advertising header format fields.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Changes the local network interface to exclusively handle packets for
the local interface, duplicating the buffers in the process.
The loopback mechanism now operates its own packet pool for the local
interface queue. The loopback is moved ahead of encryption, allowing the
local interface packets to go back up the stack without network crypto,
saving a full round of encrypt/decrypt for self-send.
Packets for group addresses the local node subscribes to are now
duplicated, with one unencrypted variant going into the network
queue, and the network bound packets following the regular path to the
advertiser.
Introduces one new configuration for setting the number of loopback
buffers.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
enable CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY:
In function `bt_le_oob_get_local':
subsys/bluetooth/host/hci_core.c:8878:
undefined reference to `bt_smp_le_oob_generate_sc_data'
Signed-off-by: chao an <anchao@xiaomi.com>
It fixes:
../../../../include/toolchain/gcc.h:169:30: warning: statement will
never be executed [-Wswitch-unreachable]
169 | #define __fallthrough __attribute__((fallthrough))
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The PA sync is now "deleted" (i.e. flags reset) before
the terminated callback is called, so that is
possible to create PA sync in the callback. One flag
was already cleared before for this reason, but one
other flag is also required, so we just clear
everything now.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Removed the check for explicit scanning, such that
an application may create a PA sync while explicitely
scanning.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Fix conditional compilations that fail when combinations
of Broadcaster, Observer, Peripheral and/or Central are
selected to build an application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilations that fail when combinations
of Broadcaster, Observer, Peripheral and/or Central are
selected to build an application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If `CONFIG_BT_CENTRAL` was enabled and the device was not scanning
or connected, then `bt_le_per_adv_sync_create` would not start
scanning for periodic advertisers.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Mark the ram version of the ccc_cfg as free after ccc has been
stored when a bonded device disconnects.
If the device use lazy loading of settings then ccc_cfg was not
cleaned up properly when a bonded device disconnects. This
resulted in the ccc system ran out of ccc_cfg resources after
having disconnected CONFIG_BT_MAX_CONN times.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Step1: Move bt_gatt_disconnected() to avoid forward declarations which
otherwise would be needed by a fix to lazy loading cleanup on
disconnect in step 2.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Since bt_l2cap_send_cb can fail returning its error is not enough as
the buffer has been modified to add the headers, so this save the state
before calling bt_conn_send_cb and takes a reference so it can be
restored its original state in case of error.
Fixes#27434
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Elevate connections always to security mode 1 level 4 when
Secure Connections Only Mode has been enabled in the Security Manager.
Elevate connections always to security mode 1 level 3 when
Legacy pairing with OOB only has been enabled in the Security Manager.
Fixes: #27338
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Return BT_HCI_ERR_INVALID_CONN_ID if an invalid handle is
given by the HCI; currently sometimes BT_HCI_ERR_CMD_DISALLOWED
is returned
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Removed the check for selected_per_adv_sync as it was unused by the
create/delete functions (which take the index as parameters), and
caused the shell not to print any values.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The `free_per_adv_sync` pointer in `cmd_per_adv_sync_create`
did not work as intended, as it didn't actually update the
pointer in the array, which caused the
`cmd_per_adv_sync_delete` to not function as intended.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
If CONFIG_BT_EXT_ADV was enabled but
CONFIG_BT_EXT_ADV_LEGACY_SUPPORT was disabled and
CONFIG_NO_OPTIMIZATIONS was enabled, then there was a
maybe-initialized warning. Fixed by adding additional
checks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Core 5.2, Vol 4, Part E, section 5.3.1 clarifies that advertising set
handle is assigned by host when advertising set is created and this
happens only on LE Set Extended Advertising Parameters.
An advertising set handle is an arbitrary number within allowed range,
i.e. 0x00-0xEF and not 0..max_supported-1.
This patch adds option to enable advertising set handle mapping from
HCI range as defined by Core specification to zero-based handles used
by LL. If enabled, HCI handle will be remapped to LL handle for each
command, otherwise HCI handle will be used as an LL handle. The latter
effectively skips mapping logic and should be used with Zephyr host
which uses zero based indexes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
There's not need to mark advertising set as created by either legacy
or advertising command since this is determined by current so-called
HCI advertising mode which determines whether host uses legacy or
extended advertising commands.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
As per Core 5.2, Part B, section 3.1.1 controller should not allow
mixing of legacy and extended advertising commands. Once 1st command
is received from host, we should only allow commands of the same type
and return an error on other commands.
If legacy advertising interface is selected by 1st command received,
we need to make sure that set with handle=0 is created since it's
used by all legacy commands.
When not using external host, we assume that only extended advertising
interface will be used thus all checks can be skipped (optimized and
compiled-out).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
A lot of commands return CC event with status parameter only, especially
when error is returned. This patch adds a helper to create such event,
similar to cmd_status.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Proper error code should be returned if advertising set with given
handle does not exist instead of generic "invalid parameters" one.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA in extended advertising PDUs is put at different offset than in
legacy PDUs thus it's better to let caller calculate and pass AdvA and
TxAdd explicitly. This way we won't need to check whether scan request
was on legacy or extended PDU every time.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
