Some macros were using :c:func: and :cpp:func: which forbids Breathe
from resolving those symbols. Update to :c:macro: for proper resolution.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
`NULL` is not defined in the Zephyr sources, but rather a C definition
which is not resolved when building the documentation and generates a
warning. Fall back to using just emphasis.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Fix some C macros that are currently just emphasized in the
documentation with proper symbol resulition using :c:macro:
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Sphinx>=3.0 includes the `struct` role in the C domain, which provides a
specific way to link to structs, while the old :c:type: role should be
primary used to typedefs. Update existing references, using :c:type:,
:cpp:type: or emphasized symbols that point to structs to use the new
role.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Following the change to use the C domain for parsing, update all
existing :cpp:func: references to :c:func:. Remove the parentheses as
well, if used, because they are not needed, this is already known to be
a function, and how it is displayed in the documentation later is a
semantic decision done by the output builder.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
The EEPROM API, which was introduced in Zephyr v2.1.0 and has not seen
any changes since, has multiple implementations supporting a wide
variety of EEPROM backends (SPI, I2C, on-chip, simulator).
Bump the EEPROM API from "experimental" to "unstable" according to the
Zephyr API lifecycle process.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Zephyr release 2.1 changed the default settings back end from FCB to
NVS in all Bluetooth samples for performance and reliability reasons.
Update the settings documentation to provide a clue to developers
trying to decide which to use.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This is covered in the porting guide, and we have complete docstrings
for these macros, but having discussion here helps new users understand
how to use these and why they exist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The on-off manager infrastructure is designed to robust asynchronous
transition between binary states where multiple clients may be
initiating a transition from any context. The actual transition is
performed using a manager that tracks the current state and pending
operations. Requests are initiated by passing a reference to an
onoff_client object that holds client state including the notification
mechanism.
This API may be used in subsystems where the transitions for a
particular driver are always synchronous and isr-ok, e.g. setting a
SoC-controlled GPIO. In this situation the full on-off manager
infrastructure is wasteful. All we need is a record of the service
state: off, active count, or error.
Add a data structure and an API that can be used to replace the onoff
manager functionality in a situation where all transitions are isr-ok
and synchronous while retaining compatible behavior from the client
perspective.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This device isn't an actual hardware driver: it's a virtual EEPROM
that stores data in an instance-specific RAM buffer, with the data
exposed on an I2C bus as a I2C follower (slave) device that can be
controlled by another device acting as a leader (master) on that same
bus.
As such it's a reasonable example of how to write an I2C follower
driver, but it's not clear that it has a real use in applications. A
Zephyr application that needs to emulate an EEPROM in a real-world
system would be unlikely to provide its data from a RAM buffer.
The sole in-tree reference is in the i2c_slave_api test, so move the
driver implementation into that test.
The Kconfig and hierarchy are being left in place until it is more
clear how this functionality should be selectable within Zephyr. The
I2C_SLAVE symbol has been converted from menuconfig to config to
eliminate a Kconfig style diagnostic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The mempool implementation doesn't require specific sizes and can
support arbitrary sizes up to the limit of available memory. The
Kconfig documentation on this configuration was confusing user.
Fixes#20418
Signed-off-by: David Leach <david.leach@nxp.com>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fixing issues with recent versions of breathe 4.19.2:
WARNING: Unparseable C cross-reference: 'struct device'
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 6]
struct device
------^
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a link to IEEE GET program web page to suggest
an option of downloading the specification to the users.
Signed-off-by: Uma Praseeda <uma.praseeda@nordicsemi.no>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This file contains definitions for macros which are integral to
significant Zephyr use cases, such as CONTAINER_OF() and various
macros used by devicetree.h internally.
As such, in practice we expect at least advanced (if not intermediate)
users to understand it, so the fact that it's not formally documented
as an API with a stability level is a problem.
Fix that by giving the docstrings a once-over and adding new ones
where they are missing. Move all the remaining non-API macros to
util_internal.h.
Add a Sphinx API page for this header, and include it in the API
overview at "experimental" stability level.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The driver API should be assigned at the time the device is defined.
Assigning in the init function is redundant and prevents moving the
pointer to a immutable driver structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now there's an audio reference section move the i2s docs there
as the audio section is a better fit.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
K_THREAD_DEFINE can no longer use K_NO_WAIT to specify the delay after
the timer API rework. Fix the documentation to use 0 and add a note.
Fixes#25697.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add some introductory text to these driver helpers which makes it more
clear how they are defined in terms of the generic APIs, which allows
removing some boilerplate from doxygen. This also gives us a chance to
call out the exceptional cases and add some more documentation to those.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some updates to the reference page for the "core" APIs, and associated
follow-ups in the guides:
- centralize documentation of chosen zephyr nodes in a non-legacy
file, provide a reference to them from the intro page in the guide
- review doxygen docstrings and correct errors for generic APIs
- add introductory text to each section in the API reference
- add missing hardware-specific pages
Documentation for layers built on top of these is mostly left to future
commits, but I do have a smattering of fixes in the guides that I
noticed while I was doing this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The sidebar for User Mode wasn't set up correctly and
it wasn't obvious that there are linked sub-pages with
design details about memory domains, system calls, kernel
objects, and so forth.
Split the introductory material into its own overview
page and set up the table of contents properly.
The text of the threat model, high level policy details,
and constraints sections is unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The device structure definition in the code has drifted from the
displayed version in the documentation. Update the documentation to
match.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The underlying structure is not suitable for use in API invoked from
user threads for the reasons explained in the edit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Extend the provided template with annotated examples of API based on
whether the functions must be invokable from user mode threads, since
there are currently no in-tree examples of the specific techniques
required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
