_FILE_PATH_HASH appears to be a legacy Diab-ism that doesn't
expand to anything in GCC.
As a result, when linking the combined binary, it's quite
possible that objects in separate C files would be merged
instead of truly being in their own section. This can confound
--gc-sections and result in unused objects still being in
the final binary if one of the other objects with the same
generated section name was actually used.
We instead just use __FILE__. This results in sometimes absurdly-
long section names in the intermediate .o files, but there is no
actual limit to how long section names in ELF binaries can be;
they are not stored directly in headers but instead referenced
as an offset in the .shstrtab section, which has all the section
names stored in it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Different areas of memory will need to have different access
policies programmed into the MMU. We introduce MMU page alignment
to the following areas:
- The boundaries of the image "ROM" area
- The beginning of RAM representing kernel datas/bss/nonit
- The beginning of RAM representing app datas/bss/noinit
Some old alignment directives that are no longer necessary have
been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1) start/end addresses for rodata
2) size of image ROM area
3) size of RAM (not including rodata/text) up to the limit of
physical memory
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
These special kernel sections represent arrays of kernel objects than
are iterated over at runtime to perform initialization.
The code expects all the data in these sections to be in the form of an
array of that section type, with each element sizeof(type) bytes apart.
Unfortunately, the linker sometimes has other plans and in some cases
was defaulting to aligning the data to some large power-of-two value,
such as 64 bytes. This causes any attempt to iterate over these sections
to fail as they are not a proper array.
Use the ld SUBALIGN() directive to force the alignment of these input
sections to 4 bytes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch splits out the application data and bss from the
rest of the kernel. Choosing CONFIG_APPLICATION_MEMORY will
result in the application and kernel being split.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The I2C Slave Read support isn't well defined and not actually supported
by any i2c driver at this point. We can add this back when slave mode
is more thought out.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print errors if assinging null values into net_buf
pools as this is a normal condition if those pools are not used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HCI Read Remote Version Information Complete event structure was
incorrect, leading to qualification test failures. This patch fixes the
structure and also the storing of the data in an endianness-agnostic
manner.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Correctly filter out the Authenticated Payload Timeout Expired event
based on the bit present on page 2 of the Event Mask.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to filter events present in Page 2 of the Event
Mask, this command allows the Host to set the Page 2 of the bitmask
through the corresponding command.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a SPI master and slave driver for the L4, F4 and F3 STM32
SoCs families.
Change-Id: I1faf5c97f992c91eba852fd126e7d3b83158993d
Origin: Original
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Some drivers would need some specific configuration flags,
re-introduce a vendor specific field for this purpose.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some cases applications may want better control of advertising
instead of the stack doing automated re-enablement. Introduce a new
option that can be used to do more "manual" advertising control.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implements CONFIG_APPLICATION_MEMORY for x86. Working in
XIP and non-XIP configurations.
This patch does *not* implement any alignment constraints
imposed by the x86 MMU, such enabling will be done later.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Applications will have their own BSS and data sections which
will need to be additionally copied.
This covers the common C implementation of these functions.
Arches which implement their own optimized versions will need
to be updated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is conditionally defined based on whether we are splitting
the application from the kernel, and is used for specifying
kernel input sections based on input files.
The kernel output sections will get matching input sections only
in libzephyr.a and kernel/lib.a.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As explained in the docstrings, a usecase behind these operations is
when other container objects are put in a fifo. The typical
processing iteration make take just some data from a container at
the head of fifo, with the container still being kept at the fifo,
unless it becomes empty, and only then it's removed. Similarly with
adding more data - first step may be to try to add more data to a
container at the tail of fifo, and only if it's full, add another
container to a fifo.
The specific usecase these operations are added for is network
subsystem processing, where net_buf's and net_pkt's are added
to fifo.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
By moving user_data member at the beginning of structure. With
refcount at the beginning, reliable passsing of contexts via
FIFO was just impossible. (Queuing contexts to a FIFO is required
for BSD Sockets API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With CONFIG_NET_SOCKETS_POSIX_NAMES=y, "raw" POSIX names like
socket(), recv(), close() will be exposed (using macro defines).
The close() is the biggest culprit here, because in POSIX it
applies to any file descriptor, but in this implementation -
only to sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two changes are required so far:
* There's unavoidable need to have a per-socket queue of packets
(for data sockets) or pending connections (for listening sockets).
These queues share the same space (as a C union).
* There's a need to track "EOF" status of connection, synchronized
with a queue of pending packets (i.e. EOF status should be processed
only when all pending packets are processed). A natural place to
store it per-packet then, and we had a "sent" bit which was used
only for outgoing packets, recast it as "eof" for incoming socket
packets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds Kconfig and build infrastructure and implements
zsock_socket() and zsock_close() functions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
patch adds necessary files and does the modification to the existing
files to add device support for x86 based intel quark microcontroller
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
During the conversion of uint16_t to u16_t the value field of these
structs was not aligned properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename bt_gatt_unregister_service to bt_gatt_service_unregister to be
consistent with other APIs such as bt_gatt_service_register.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This initial commit adds the following:
* Handling of privacy HCI commands
* New Link Layer filter module for both whitelist and resolving list
* Advertising RPA generation with timeouts
Follow-up commits will expand the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The porting of the TI CC2650 SoC introduces the need to
write a specific configuration area (CCFG) at the end of the
flash. It is read by the bootloader ROM of the SoC.
For now, this is a quick hack and not a generic solution;
similar needs may arise with other hardware.
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@smile.fr>
