in NXP platform, src address shall be 4 bytes alligned
adding this restricting to test cases
fixing: #48512
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Currently the level triggered test disables the interrupt in
the first callback. This doesn't test interrupt re-entry if the
gpio level is unchanged.
This commit adds an option to disable the interrupt after
several calls and adds two tests with the extra condition.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Current API allowed to get notified when the maximum system latency
changes, however, a single callback was allowed. The design was intended
for SoC specific actions when latency changes. However, in some cases
drivers may also want to know the current maximum latency to perform
local actions if other parts of the system modify it.
This patch updates the API with a pair of subscribe/unsubscribe calls to
achieve such goal. Tests have been updated to show how the API can be
used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit disables the infinite recursion warning
(`-Winfinite-recursion`), which may be reported by the GCC 12 and
above, for the `stack_smasher` function because that is the intended
behaviour.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit fixes code to pick flash parameters from flash area
device rather than chosen 'zephyr,flash'.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that ADC drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the ADC.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Some files were missed during the migration. This patch adds the prefix
where missing.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The test has been accessing flash area parameters by flash
area label, but flash controller by chosen 'zephyr,flash-controller',
instead of picking device that the area is really on.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added API function +int settings_storage_get(void **storage)
which allows to get storage instance used by the
settings backed to store its records.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Refactoring test by adding macro for total packet length
calculation and header length.
Tuning test to trigger a scenario where free space was miscalculated.
Bug was fixed in the previous commit.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Mesh Profile Specification errata 11310
Section 4.4.4.1
"This model shall support model publication, as defined in Section
4.2.2 of the Mesh Profile specification and model subscription,
as defined in section 4.2.3 of the Mesh Profile specification."
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
./raw directories for each testsuite were remains after having
base64 encoding test variant beside which raw variant was existing.
This patch flatten the directories structures.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
These tests are identical as RAW variant,
since the base64 settings encoding was removed (#26053)
from the settings.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Now that I2C drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
It can happen that two similar stacks enter a retransmission cycle
due to a packet collision. If the transmission timeout is the same
both stacks will retry at the same moment resulting in another
collision.
By introducing a randomized retry timeout, the chance of
a second collision is reduced and it reduces furter the more
retransmissions occur.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Apply an exponentially increasing wait time between tcp retries. This
is a good balance between reacting fast to single lost packets and reduce
the network load when an outage takes a little longer. It also allows the
connection to survive a longer interruption with less retransmissions.
Update the test to accommodate for the increased socket closure timeout
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Previously the test waited for the worst case time till all sockets
where closed, this causes the test to wait for a long unnecessary time.
Secondly it does not ensure the sockets are actually closed before
starting the next tests.
For tests that are not conducted in user mode, wait until all the contexts
are close for a maximum time. If the contexts are not closed in time raise
an explicit assertion.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Exclude the 20kbit/s CAN timing test from running on the Espressif ESP32
TWAI driver. The TWAI does not support bitrates below 50kbit/s due to the
combination of CAN clock and prescaler range.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
If a device manually specifies that it depends on a second DT device,
add the first device to the second devices list of supported devices.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In tests/drivers/clock_control/stm32_clock_configuration/stm32u5_devices
test suite, core_init.overlay configure msis to use pll-mode.
Since pll-mode is not configured for msik in spi1_msik variant the test
fails since both clocks should support the same configuration regarding
pll mode (an assert in raised in the driver).
Fix this in spi1_msik test variant.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add testcase filter based on devicetree alias "dma0" being set. This
is needed since the testcase requires it to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add testcase filter based on devicetree nodelabel test_dma being set.
This is needed since the testcase requires it to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add testcase filter based on devicetree nodelabel test_dma being set.
This is needed since the testcase requires it to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
This commit sets an initial value of 0 for the `res` variable, whose
pointer is passed to other functions and is not directly assigned
within the calling function.
Note that, when the test completes successfully, the value of the `res`
variable should be set to `423` (the value of `set_res`).
This fixes the "‘res’ may be used uninitialized" warning generated by
the GCC 12.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
the testcase source file f16.c and f32.c might be
compiled into the final binary at the same time,
so need to set unique testcase name for each test.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
the testcase source file f16.c and f32.c might be
compiled into the final binary at the same time,
so need to set unique test names for each test,
otherwise, it will report build failures "multiple
definitions".
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
1. config ztest_new_api and update the testcase defines
2. remove shell interactive test cases, twister has another plan
3. add sg case support for kinetis and rt10xx platfrom
related: #47002
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This commit sets an initial value of 0 for the `elapsed_ms` variable,
which may be used uninitialised when the while loop below does not
execute.
This fixes the "‘elapsed_ms’ may be used uninitialized" warning
generated by the GCC 12.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
