Whether a timeout is linked into the timeout queue can be determined
from the corresponding sys_dnode_t linked state. This removes the need
to use a special flag value in dticks to determine that the timeout is
inactive.
Update _abort_timeout to return an error code, rather than the flag
value, when the timeout to be aborted was not active.
Remove the _INACTIVE flag value, and replace its external uses with an
internal API function that checks whether a timeout is inactive.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The original implementation allows a list to be corrupted by list
operations on the removed node. Existing code attempts to avoid this by
using external state to determine whether a node is in a list, but this
is fragile and fails when the state that holds the flag value is changed
after the node is removed, e.g. in preparation for re-using the node.
Follow Linux in invalidating the link pointers in a removed node. Add
API so that detection of particpation in a list is available at the node
abstraction.
This solution relies on the following steady-state invariants:
* A node (as opposed to a list) will never be adjacent to itself in a
list;
* The next and prev pointers of a node are always either both null or
both non-null.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Although sys_dnode_t and sys_dlist_t are aliases, their roles are
different and they appear in different positions in dlist API calls.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added new UART API, that allows for longer transmissions, leaves
IRQ handling on driver side and allows for DMA usage.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds bt_gatt_write_response_cb works similarly to
bt_gatt_notify_cb which can take a callback to be called when the PDU
is considered transmitted over the air.
Note: This can also be used to disable the ATT flow control which would
blocks sending multiple commands without wainting their transmissions.
Fixes#11558
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from x86 SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from ARM SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support for generating Code coverage reports.
The prj.conf needs to enable CONFIG_COVERAGE. Once enabled, the
code coverage data dump now comes via UART.
This data dump on the UART is triggered once the main
thread exits.
Next step is to save this data dump on file. Then run
scripts/gen_gcov_files.py with the serial console log as argument.
The last step would be be to run the gcovr. Use the following cmd
gcovr -r . --html -o gcov_report/coverage.html --html-details
Currently supported architectures are ARM and x86.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is a custom Gcov implementation. Taking excerpts from gcc
gcc libgcc/libgcov.h and gcc/gcov-io.h.
Ported to zephyr by Ramakrishna Pallala <ramakrishna.pallala@intel.com>
and Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When offloading is enabled, a call to inet_pton() results in a call to
zsock_inet_pton() based on its implementation in include/net/socket.h.
This eventually leads to a call to _impl_zsock_inet_pton(), which is
not defined when offloading is enabled.
In this commit, we have chosen to directly call net_addr_pton() in
inet_pton() in the offload case to be efficient, and keep the
implementation as it is when offload is not enabled.
Fixes#12441
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add missing sections being reported as orphan with latest compiler
version for x86 and discard them. Do the same on ARM.
Those sections are used for dynamic linking which we do not support in
Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
I was half way through typing up my own one of these when I realized
there was one already in the tree. Move it to a shared header.
(FWIW: I really doubt that most architectures actually benefit from
their own versions of these tools -- GCC's optimizer is really good,
and custom assembly defeats optimization and factorizations of the
expressions in context.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was apparently intended to allow for per-arch linker includes,
but no such includes ever existed. All it does is senselessly throw
an error on unrecognized architectures. Yank.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Added macro that generates simple report descriptor for mouse.
This improves the readability of hid-mouse sample.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Adds support for the device configuration data (DCD), which provides a
sequence of commands to the imx rt boot ROM to initialize components
such as an SDRAM.
It is now possible to use the external SDRAM instead of the internal
DTCM on the mimxrt1020_evk, mimxrt1050_evk, and mimxrt1060_evk. Note,
however, that the default board configurations still link data into
internal DTCM, therefore you must use a device tree overlay to override
"zephyr,sram = &sdram0"
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds support for the boot data, image vector table, and FlexSPI NOR
config structures used by the imx rt boot ROM to boot an application
from an external xip flash device.
It is now possible to build and flash a bootable zephyr image to the
external xip flash on the mimxrt1020_evk, mimxrt1050_evk, and
mimxrt1060_evk boards via the 'ninja flash' build target and jlink
runner. Note, however, that the default board configurations still link
code into internal ITCM, therefore you must set CONFIG_CODE_HYPERFLASH=y
or CONFIG_CODE_QSPI=y explicitly to override the default. You must also
set CONFIG_NXP_IMX_RT_BOOT_HEADER=y to build the boot header into the
image.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zero length array is a GNU extension that works as an header for a
variable length object. The portable solution for this is using
flexible length array, but this can be used only in the end of a
struct declaration and this is violates MISRA-C rule 18.8.
The easiest way to rif of this is make the macro expand to nothing but
then we will have a trailing semicolon that is not allowed in C99. So
the macro was changed to automatically add the semicolon when needed.
This may break code identation in some editors but it is a fair price
to pay to have portability and compliance.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
net_frag_linearize() is just a wrapper for net_buf_linearize(). As
the latter was refactored to never return error, and instead just
return actual copied length, update the former and its usages too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't try to find "errors" in the values of dst_len and len params
passed to net_buf_linearize(). Instead, do what entails with the
common sense from the values passed in, specifically:
1. Never read more than dst_len (or it would lead to buffer
overflow).
2. It's absolutely ok to read than specified by "len" param, that's
why this function returns number of bytes read in the first place.
The motivation for this change is that it's not useful with its
current behavior. For example, a number of Ethernet drivers linearize
a packet to send, but each does it with its own duplicated adhoc
routine, because net_buf_linearize() would just return error for the
natural use of:
net_buf_linearize(buf, sizeof(buf), pkt->frags, 0, sizeof(buf));
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This API was using variable number of arguments. Which is not
allowed according to misra c guidelines(Rule 17.1). Hence making
this API into a macro and using the util macro FOR_EACH_FIXED_ARG
to get the same functionality.
There is one deviation from the old function. The last argument
shouldn't be NULL.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This new macro will be able to do FOR_EACH with a fixed argument.
This fixed argument will always be called as the 2nd argument
to the function call(_fn).
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
As mentioned in issue #12265, some networking APIs
aren't included in the generated
API docs because doxygengroup directives were missing.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As mentioned in issue #12265, this API wasn't included in the generated
API docs because a doxygengroup directive was missing.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This should make it more clearer what APIs are intended to be used with
server and client instances, in addition to that mention on the function
documentation when operation is valid only for local attributes.
Fixes#12138
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Used as a checksum on command messages when talking with MMC cards.
Implemented using the unwound bytewise implementation from
https://en.wikipedia.org/wiki/Computation_of_cyclic_redundancy_checks
which is a good mix of size and speed.
The API and naming matches lib/crc7.c in Linux.
Signed-off-by: Michael Hope <mlhx@google.com>
