An LE controller shall no longer support HCI_Read_Local_Supported_Codecs
[v1] according to BT Core 5.3.
Command bit and support code removed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adding a bit-mask to the 'extra' data structure allowing passing info
re. active CIS's to the ull_conn_iso_done handling. Per CIS storing
an expiration time counter, monitoring in done handling. Adding
establishment timeout monitor in CIS Create procedure, completing
and ntf'ing accordingly.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS is in teardown state, the data in structure should not be
trusted, so skip passing data to ISOAL
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Missing decode of conn_event_count on CIS_IND
Peripheral Suggest update to conn_event_count in case of a delayed
CIS_IND, allowing CIS peripheral more time to setup
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When generating notification for Sleep clock accuracy, check for
success on rx_node allocation was left out. This is added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Implement HCI commands HCI_Read_Connection_Accept_Timeout and
HCI_Write_Connection_Accept_Timeout, and enable the feature in
supported commands.
Remove hardcoded use of default accept timeout in new LLCP code, and
use configurable value instead.
This makes EBQ test /HCI/CIN/BV-03-C pass.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adjust skip value so that there is minimum of 6 events that can be
listened to before Sync_Timeout occurs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ensure maximum size of common extended header format be
reserved when CONFIG_BT_CTLR_ADV_RESERVE_MAX=n is used so
that changes to ACAD, like channel map update does not need
frequent update to periodic advertising auxiliary channel
PDU time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calculating the offsets between primary advertising
PDU, auxiliary PDU, Periodic Advertising PDU, and BIS PDU,
the values used as anchor points for starting the periodic
interval for auxiliary, periodic and BIG events, should be
ensured to have the minimum auxiliary frame spacing T_MAFS
between the PDUs. EVENT_OVERHEAD_START_US has to be reduced
as this value is used to offset the start of the radio
event on air.
Reverts commit b867f0e8a6 ("Bluetooth: Controller: Fix
T_MAFS between broadcasting roles").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The default number of buffers (contexts) for locally initiated
procedures was 4. Per default the host initiates 3 procedures
when opening a connection, allowing the application to initiate
only 1 additional procedure in parallel.
This commit increases the default to 6, if auto phy-update and
dle is enabled, increasing the robustness for an application.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
- Add CIS Create policy config choices
- Implemented CIS Central in ULL following proposed setup/commit flow
- Full support for HCI_LE_Set_CIG_Parameters_Test
- Extend ull_conn_iso_start and ull_conn_iso_ticker_cb to handle
central role
- Partial support for HCI_LE_Set_CIG_Parameters. TODOs:
* Drop suggested retransmissions if Max_Transmission_Latency is
exceeded
* Calculate ISO interval based on policy
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix issues with referencing invalid netbuf data and add missing
parameter. Removed returning of handle in setup functions, as handles
are not available until commit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move ull_peripheral_iso_start ull_peripheral_iso_ticker_cb to
ull_conn_iso, to share code between CIS peripheral and central.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Local procedure for CIS central establishment. Calls yet unimplemented
functions in ull_central. Changes are guarded by
CONFIG_BT_CTLR_CENTRAL_ISO.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Replace the BT_CTLR_ADVANCED_SCHEDULING_CENTRAL_CONN_SPACING
Kconfig with BT_CTLR_CENTRAL_SPACING to configure the
the spacing from the beginning of a central connection event
to beginning of the next central connection when supporting
multiple simulataneous central connections.
If the BT_CTLR_CENTRAL_SPACING in microseconds is smaller
then the required time reservation for a connection event,
for given maximum data length and PHY in use, then the
calculated time reservation will be used as the spacing
between consecution central connection events.
The change fixes an issue wherein use of old Kconfig with
higher values causes new central connections to be placed
in between already connected central role if there was
free time space available to fit the new connections time
reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly set all bits of used radio registers when
configuring radio events, removing the dependency on having
the power-on reset value and removing the need to ensuring
power-on reset values being set in the radio peripheral.
This will ensure the Controller has radio register value
correctly configured irrespective of changes across SoCs'
radio register power-on reset values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix advertising set's is_enabled flag to be reset when
connection complete is dequeued for connectable advertising
started using legacy advertising enable HCI commands. And
reset the is_enabled flag when advertising set terminated
is dequeued for connectable advertising enabled using
Extended Advertising HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks difference calculation to determine delayed
prepare callback. Without the use of masking by
ticker_ticks_diff_get, the diff value can be higher than
the supported 24-bit value. i.e. ticker_ticks_now_get()
rolls over in 24-bit value, whereas ticks_at_event is
free running value of 32-bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add long control PDU size support, also the implementation
now allocates control PDU size restricted to the supported
biggest control PDU that is enabled in the application
build. Features that are covered based on the increasing
control PDU sizes are ClearText connections, Encrypted
Connections, Connection Parameter Request support and
Create CIS control Procedure (Connected Central ISO)
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
-- Handle time calculations across the point at which the controller's
time information from the controller's clock will wrap (in the
microsecond range)
-- Use wrapped time in all ISO-AL time calculations
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Adding support for allowing user extension code to support deferring
anchor point moves. Refactored LLCP only.
Note: This is NOT supported by LEGACY LLCP impl.
KConfig'd by BT_CTLR_USER_CPR_ANCHOR_POINT_MOVE
Modified ll_conn_update API, to accommodate passing offsets
Modified CPR/CU context data structure
Modified CPR/CU procedure to handle anchor point move wait state
Fixed up unit tests, adding anchor point move cases to CPR/CU test
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Using a macro instead of repeated identical code for validation
Use macro for pdu length field encoding
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adding controller support for updating SCA in ACL and ISO peripherals
Adding HCI API support for le_request_peer_sca and complete event.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Check LE event mask state as well as host controlled feature mask state
and reject CIS request accordingly.
Release pre-allocated ISO resources on rejection of request
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Program CIG ticker with window widening drift. Introduce vendor specific
conversion macros allowing sub-microsecond resolution in the
accumulation of window widening drift per interval.
Calculation of window_widening_max_us is done for NSE<3, and must be
adjusted in the LLL before use, if the first CIS in the CIG has a
NSE>=3. In that case window_widening_max_us shall be limited to one sub
interval.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Functions related to string manipulation that were defined in
`common/log.h` has been moved to the `common/bt_str.h` file and their
implementation in `common/bt_str.c`.
Files that were using those functions has been updated consequently.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Fix ticker slot reserved check to handle deferred execution
of ticker worker where ticks_elapsed is greater than
ticks_slot_previous. In which case, each ticker expiring be
checked for overlap with previous slot reservation.
This fixes:
ASSERTION FAIL [0] @ WEST_TOPDIR/zephyr/subsys/bluetooth/
controller/ll_sw/nordic/lll/lll.c:476
lll_preempt_calc: Actual EVENT_OVERHEAD_START_US = 3906
Flash erase operation exposed the assertion, CPU being
halted deferred the ticker_worker collision resolution and
ticker expiry was not individually checked for overlap with
previous expired ticker reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing first connection event due to first connection
event ticks_slot of central and peripheral overlapping with
the initiator window ticks_slot and advertising ticks_slot,
respectively.
Use ticker_stop_abs interface so that when the ticker is
stopped the ticks_slot_previous is truncated to the actual
ticks used as requested by the supplied absolute ticks.
Relates to commit 8a294a62d4 ("Bluetooth: controller:
legacy: Fix missing first conn event").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker instance ticks_current initialization to be
acquired from the RTC counter value. The RTC counter may
have run in previous use of ticker before bt_disable hence
keep the instance ticks_current equal to RTC counter value
when ticker_init() is called again.
Relates to commit 4349a475a8 ("Bluetooth: Controller: Add
deinit() infrastructure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to avoid using multiple sources of truth for the platfom's
endianness, convert the in-tree code to use the (BIG|LITTLE)_ENDIAN
Kconfig variables exclusively, instead of the compiler's
__BYTE_ORDER__.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
According to specification, when executing a remote procedure the
rx parameters used need to be updated when the REQ from the peer
is received. Currently this is done only when an ACK is
received on the RSP PDU send out.
This commit updates the RX parameters upon receipt of the REQ PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Macro that was defined in the `common/log.h` has been moved to the newly
created `common/assert.h` file.
Files that were using those macro has been updated consequently. Also, the
include of `common/log.h` has been removed of files that were actually not
using any logging methods.
Some `#include "common/log.h"` have been removed. Those were required
before when including `hal/debug.h`. With this change, `hal/debug.h` no
longer has this requirement, because the replacement, `common/assert.h`
includes what it uses.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds proper support for having more than one PDU pool for the advertising
PDUs (to save memory)
- Introduces lll_adv_aux_data_init, lll_adv_aux_scan_rsp_alloc and
lll_adv_sync_data_init to indicate if the PDU is a primary/legacy PDU
or secondary/auxillary PDU
- Scan response PDUs are initialized later, since the correct pool to draw
from depends on whether the advertising is extended or legacy
Signed-off-by: Troels Nilsson <trnn@demant.com>
There is access to the procedure context after a potential release
of the context, which (in theory) can lead to incorrect behaviour
There is no good way of testing this with a unittest without adding
specal debug code to the ull_llcp_local module
After code-inspection no other location has been found with
potential access after context release
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
According to Core 5.3 Vol 4, Part E, section 7.8.82 slot_durations,
switch_pattern_len and ant_ids are used only for AoA and do not affect
reception of AoD CTE.
To improve interoperability checking of correctness of these parameters
is not required. It will not affect lower link layer in case the AoA
CTE reception feature is not enabled in Kconfig.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
