This converts away from camel case according to the coding style.
Also, the file description has been made into doxygen style.
Change-Id: Ib4dd85a4a96e4e87279c92fa243d3f860ebe63f2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Converts the file description to doxygen format, and updates
the information inside. Also removes empty lines, updates
the comments for function, and adds missing comments.
Change-Id: I7610e8667cd85feb0c4c853b44880f7e29b6c05a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Clean up variables and function arguments to conform to coding
style. Also align the function argument list.
Note that this only changes the parts related to UART.
Change-Id: I84a6ba88963784f6ddc77d5bda653a7d2de6a72b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The files idtEnt.h and segselect.h in shared are linked from
the source tree for no good reason adding and extra top level
directory that might be confusing.
The shared/ here means shared between host and target, this is
not longer necessary in our build system.
Change-Id: Id9665e10de7a1d290888d9069be3db9f4330d284
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is the final step to convert serial to the new driver model.
The dev->driver_api is now being used by individual drivers.
As a side effect, it is now possible to build multiple serial
drivers in the final image (though it won't make much sense).
Change-Id: I5d864e6503a5431b29006c311320155adf81cf5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this, the UART console has its own initialization which is not
dependent on UART init routines.
This will allow the app to utilize all UARTs for other purposes,
instead of always reserving one for console. Future patch
will enable this choice.
Note that the console init is effectively demoted to pure_init
from pure_early_init. The UART console depends on UART being
initialized, but there is no deferred init at this point.
So this initializes the console a bit later than UARTs,
simply to make sure the UART is initialized before using it.
Once there is a mechanism for some type of deferred initialization,
the UART console init can be promoted back to pure_early.
Change-Id: Iba95197b13384cb1a46e34c78638348b7a0bec8c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This restructures the device structs and now utilizes the new
driver initialization model. This is another step towards
converting the serial driver to the new driver model.
Note that the serial driver does not initialize the hardware
unless it is being used by another driver. The configuration
of the serial port needs to be done by the driver utilizing
the port (e.g. baud rate, interrupt priority, etc.).
Therefore, some serial ports are declared but not exactly
configured.
Also note that the UART console is being initialized at
the same time as the serial port. This will be removed
in future patch, so the UART console driver will do
its own initialization.
Change-Id: Idd89954b2d0649a557ba8c869ee96512fec898e4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Highlight the fact that find_[lsb|msb]_set operate on a 32-bit word.
Change-Id: I24cee7709ea6497508dbc7f96a7b4d74fa4bc257
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The new names reflect better what the functions do: they find the first
bit set starting from the least or most significant bit, i.e. they find
the least or most significant bit set, in a 32-bit word.
Change-Id: I6f0ee4b543f6f37c2f08f7067e14e039c92a6f6a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The inline versions are renamed to remove the _inline suffix, and the
non-inline versions are removed from the code base.
Change-Id: Iee2e6adcfb5da1fe0a978a05aa854e10ae82a8b8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add support for signed write with sign parameter for write without
response.
Change-Id: I79008532d88b10d34db1f68898ad4258dd3e761b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The tinydtls.h include file was missing from earlier tinydtls
commits.
Change-Id: I8b8398313c7f598daf81f4fb8c07fd138e22e22d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds validation for passed callbacks. Previously registered
callbacks need to be explicitly unregistered by passing NULL.
It is no longer possible to implicitly overwrite callback
structure.
Input Output Capabilities generation is factored out to separate
function. This is in preparation for adding more callbacks.
Change-Id: Ie809ea2daa80f9c54585efb459b49af1107007d3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register agent with display capability resulting
in DisplayOnly InputOuput Capability being used.
Change-Id: I98931af35c51a71882b60303c0f5d4da19eefbc4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For now this is used only in conn.h. Allows to reduce includes
dependencies.
Change-Id: I60dbe588e711fa0332049cbea43ffb6838a58823
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Documenting the function that returns the used UDP connection
pointer. This function is needed for example in tinyDTLS
server implementation.
Change-Id: I08aae798dab0749912694d6338de91dcbd13df84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add NET_BUF_IP() and NET_BUF_UDP() macros that return
correct struct containing either IP or UDP data.
Change-Id: I43b828ef78c1f13ccee41e6a60daa36145a35eba
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This split the use of ATT Write Command and ATT Write Request since with
the former it is possible to sign the data thus making combinations of
parameters in bt_gatt_write complex/confusing.
Change-Id: I0349acd16d22ea4e38ac3e5ad8c3cdc318851633
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixed the description of what happens if there is a timeout.
Change-Id: Id19a791193b527a8ee086f069e103f42d2d9b0f4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not touch uip_len(buf) value as Contiki IP stack
will use it to determine what it should do with the
received packet. So after we have received the packet,
we update separate datalen variable in net_buf that will
store the correct length of the packet.
Change-Id: Iab79b741508e95e581d1727645e6b1d1eacded4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to specify a timeout in ticks while waiting
network data. The timeout value has following meaning:
TICKS_UNLIMITED wait forever
TICKS_NONE do not wait
value > 0 timeout value (only applicaple if
CONFIG_NANO_TIMEOUTS is defined)
Change-Id: Icbb33fa0eeb462659d4006dd9d948a04f39a87a9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending data to network, make sure to check the return
code from network driver. The driver should return these codes:
0 : If packet could not be sent. In this case buf should
not be released.
1 : If the packet was sent successfully. In this case the buf
should be released by either the send() or some other
lower layer function.
<0: If there is an error, the buf should not be released by
send() function.
Fixed the relevant part in Contiki code so that the tcpip_output()
return correct value
0 = packet was not sent, caller needs to free it
1 = packet was sent, network driver will free the net_buf
after sending it to medium
Change-Id: I4380d7747985fc057f5ef73ca97b76f6e9888a55
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables writing from offset using Prepare Write + Execute Write
procedures including Long Write procedure when the data is bigger than
the MTU.
Change-Id: Id35d66c011ba582a4ba92ffe75444226e479335a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The inline versions are renamed to remove the _inline suffix, and the
non-inline versions are removed from the code base.
Change-Id: I7314b96c42835f15df4c537ec11ab7961d4ee60f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They use the same logic and _k_server handler, so only have one
implementation of the user-facing API.
Instead of using ENDLIST, create a new internal _USE_CURRENT_SEM symbol
that reflects what the implementation is doing.
Change-Id: I5c50efd15f4e97b778b4b5efd5ec931384a8631f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These macros have C language-isms and cannot be used from assembly code.
Change-Id: I07ffc27411300339e08ae7ef9c19249903be4774
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the context switch profile point for x86 and ARM arquitectures.
Change-Id: Ib7205059104ed47b96ba75b8cfefec3ff35f6813
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a standardized mechanism to add profiling points to the Kernel
with a single interface for the user to collect the profiling data.
Change-Id: I4fa34ac1b42f73a73ba1fd805e755ee2fd00dff7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a log event tool with a single interface for the user to
add/collect the event log data.
Change-Id: Ia4b78836748c5d7e44ba1bdd50c28434e8a55d65
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some arches this is an unsigned int, some an unsigned long.
Standardize on unsigned long for all arches.
Change-Id: I1661ea2d895915c0be3eaabdb79d90435f3945b0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix documentation to link to autogenerated API entries.
Change-Id: I0355435c189bff17c4468b1f300dcffcce73e51d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Used to direct the compiler to examine the number and correctness
of arguments based on codes in the format string.
Change-Id: I8e408b3fcd6897a14d30363425f14f81628b3d3f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Extending devices.h to contain values that include error code
values that a driver may need to share. These include things like:
okay, fail, invalid configuration, etc.
Change-Id: Ib3a5e3fdd93ec8115686cf02a75436af31ef6eff
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This enable defining memory maps in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_MEM_MAP(mem_map_name, ...). The memory maps created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
memory map APIs.
Define the memory map using:
DEFINE_MEM_MAP(mem_map1, blocks, block_size);
and "mem_map1" can be used, for example:
task_mem_map_alloc(mem_map1, ...);
or,
task_mem_map_free(mem_map1, ...);
etc.
To use the memory map defined in another source file, simply add:
extern const kmemory_map_t mem_map1;
to the desired C or header file.
Change-Id: I9c551b90f9d0a95f961fd8ec1c5278c2ea44312d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _k_mem_map_list was a static array generated by sysgen,
where it containing all pre-defined memory maps from MDEF file.
To support private memory map objects (aka, defining them within
source files), the list has to accommodate memory maps that
are not only processed through sysgen, but also those defined
within source files.
This is done by creating a new section in binary, and all memory
map pointers go into this section. By doing this, the list
can still be manipulated as an array.
Change-Id: I1f3414b72f685fef4b99850749178661f14d9345
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The opaque memory map object id type is now a pointer to
the associated memory map structure, rather than an index
into the microkernel's array of memory map structures.
This change is a pre-requisite to support for private
memory map objects, which are defined in source code.
Change-Id: I82ecb59eeed00efa54f781f775710c92ff9c9fc9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enable defining pipes in source code in addition to
defining in MDEF files. This introduces the macro
DEFINE_PIPE(pipe_name, ...). The pipes created this
way are the same, in functionality, as those defined in MDEF
files. They can be manipulated by the standard microkernel
pipe APIs.
Define the pipe using:
DEFINE_PIPE(pipe1, size);
and "pipe1" can be used, for example:
task_pipe_put(pipe1, ...);
or,
task_pipe_get(pipe1, ...);
etc.
To use the pipe defined in another source file, simply add:
extern const kpipe_t pipe1;
to the desired C or header file.
Change-Id: Iae8e04706359bc18aae51acc75df3e3d26388882
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
