integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_NET_BUF_VARIABLE_DATA_SIZE option had not test coverage at all,
making in vulnerable for regressions. There is no dedicated test suite
to verify this option, but at least we can enable it in a few test
suites to make sure the configuration is functional.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix some problems with test_recv_ipv6_fragment test case:
* net_pkt_ipv6_hdr_prev was not set, in result reassembly logic
overwritten wrong part of the IPv6 header
* Wrong checksum was set in the first fragment
Add more verification to the test_recv_ipv6_fragment test case:
* Actually register ICMPv6 Echo Reply handler so that the reassembled
packet can be analyzed
* Verify that IPv6, ICMPv6 headers and data are correct
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add test case which verifies that IPv6 fragmentation and reassembly
works correctly in loopback scenario. The test case verfies that:
* IPv6 packet is fragmented correctly in the send handler
* IPv6 packet is reassembled correctly in UDP receive handler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The test cases which make use of wait_data semaphore incorrectly fed the
semaphore after processing the first fragment, instead of waiting for
all of the expected fragments to be processed. Adittionally, the test
cases did not really fail if the semaphore timeout occured (hence if for
example last fragment was lost, it wouldn't be detected by the test).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The second interface was not really used by the testsuite and only
obfuscated the testsuite content, hence remove it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Validate that basic lifecycling and usage of the MQTT-SN client
work correctly by providing a mocked MQTT-SN transport. Connection
setup and state changes are tested.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
Validate that the encoding and decoding part of the MQTT-SN library
work correctly using prepared byte arrays of messages.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
This adds a test for the new ipv4_fragment feature. This test suite
checks TCP and UDP messages are correctly fragmented and reassembled,
checks that an ICMP error is sent if not all fragments were received
and checks that packets with the do not fragment bit are not
fragmented.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Added support for handle case when all data is not possible to
add in 1 message for Send and Observed Notification.
Notification continuous pending timeseries data is triggred
by iMIN attribute.
Send Operation generate continuous message in multiple lwm2m
message.
Normal Read by server only report back latest stored data.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
These tests turn on mbedtls and require ajusting min flash
requirements to prevent twister from trying to build them on
platforms without required amount of flash.
Fixes: #51421
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
DNS SD test suite does not really make use of IP connectivity, so
there's no need to configure IP addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the UDP test suite is mostly intended to run over loopback, use
loopback addresses and skip configuration of other addresses.
For the test cases that use fake Ethernet iterface the configuration
is done manually anyway, so just rename the symbols to avoid
collission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the TLS test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the TCP test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the test suite is intended to run over loopback interfce, use
loopback address and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the test suite is intended to run over loopback interfce, use
loopback address and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The test suite already configured the dummy interfaces manually, so it's
only needed to provide respective address strings, no need to involve
NET_CONFIG_SETTINGS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The can_frame and can_filter structs support a number of different flags
(standard/extended CAN ID type, Remote Transmission Request, CAN-FD format,
Bit Rate Switch, ...). Each of these flags is represented as a discrete bit
in the given structure.
This design pattern requires every user of these structs to initialize all
of these flags to either 0 or 1, which does not scale well for future flag
additions.
Some of these flags have associated enumerations to be used for assignment,
some do not. CAN drivers and protocols tend to rely on the logical value of
the flag instead of using the enumeration, leading to a very fragile
API. The enumerations are used inconsistently between the can_frame and
can_filter structures, which further complicates the API.
Instead, convert these flags to bitfields with separate flag definitions
for the can_frame and can_filter structures. This API allows for future
extensions without having to revisit existing users of the two
structures. Furthermore, this allows driver to easily check for unsupported
flags in the respective API calls.
As this change leads to the "id_mask" field of the can_filter to be the
only mask present in that structure, rename it to "mask" for simplicity.
Fixes: #50776
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Validate the faster IP checksum algorithm against the straightforward
implemation using a variety of packet length and contents.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Updated lwm2m_enigen_set/get_time API for support time_t.
Updated LwM2M engine set/get resource time to time resource support
time_t and uint32_t input.
LwM2M engine put and get time API update to use time_t.
Time series data cache entry have own type for time resource.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Move net icmpv4 tests to use new ztest API
1. Add teardown, remove addr
2. Fix a packet release bug in test_send_echo_req_bad_opt
3. Combine send_echo_req/rep, as they should be run in sequence
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
The default ztest stack size was not large enough for the test suite to
execute on certain platforms (noticed on x86, cortex-m4). Therefore
increase the CONFIG_ZTEST_STACK_SIZE for the suite to prevent stack
overflow.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
CONFIG_MBEDTLS_TEST enables mbed TLS self-test routines, which require
rand() function. As this function is not available by default with
minimal libc, it caused build warning on certain platforms.
As this feature is not really needed for 802.15.4 tests, simply remove
it from the project file to fix the issue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Given that DHCP input packet is now released after
dhcpv4_handle_reply() function is called (and potentially new message
allocated/sent) the test needs more net buffers to work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add test which verifies that interface operational state changes
correctly when carrier and dormant status is updated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add test that verifies if a virtual interface state is updated properly
when an underlying real interface is brought down/up.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit updates the `getaddrinfo` test to use the newlib nano
variant when available because it can run out of RAM with the newlib
full variant on the platforms with a small RAM.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This change implements part two of the program laid out in the TSCH RFC,
see #50336#issuecomment-1250250154 :
> Consolidate IEEE 802.15.4 options in net_pkt
This change improves decoupling of generic net core code from
IEEE 802.15.4 internals. It also simplifies IEEE 802.15.4
attribute cloning and thereby makes it easier to maintain and less
error prone (and probably even faster as individual bits are no longer
copied over separately).
This enables us to extend and design IEEE 802.15.4 L2 attributes inside
the package in isolation from the net core code which will no longer
have to be changed when introducing changes or additions to the flags.
This flexibility will be built upon in later change sets to model the
IEEE 802.15.4 attributes closer to the spec.
The solution is inspired by Linux's sk_buff->cb attribute which addresses
the same concern as the attribute introduced in this change set:
https://elixir.bootlin.com/linux/v6.0.1/source/include/linux/skbuff.h#L871
As the inline comment says: The cb attribute can be made a union or even a
uint8[something] in the future, if further L2s need a control block, too.
Right now such full indirection would make the code overly abstract, so
I chose to compromise with maintainability in mind.
Care has been taken to ensure that this changes does not introduce
additional padding into the net package. To maintain zero-padding, future
changes to the net packet struct will have to ensure that the
IEEE 802.15.4 struct is 4-byte aligned (iff the IEEE 802.15.4 struct
continues with max uint32_t scalar members) which is no deviation from
the previous implementation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The net packet structure contains pointers to link-layer source and
destination addresses. Usually, these structures do not point to
separately allocated memory but directly into the packet's data buffer.
In case of a deep package clone (which includes copying the buffer) the
copy of the ll addresses continued to point into the old package
(contrary to a rather misleading inline comment). This was proven by an
additional failing unit test assertion.
As the original package may be unreferenced while the cloned package is
still being accessed, the ll address pointers of the cloned package may
become invalid.
The fix consists of two parts:
* First it is determined whether a given ll address actually points into
the buffer and if so at which logical cursor offset it is located.
* If the address points into the package buffer then the cursor API is
used to determine the corresponding physical memory location in the
cloned package. The ll address of the cloned package is then patched
to point to the cloned buffer.
Additional assertions were introduced to the existing unit test to ensure
that the newly generated address points to the correct content of the
cloned package.
The solution is implemented in a generic way so that the previously
redundant implementations were consolidated into a single one. The code
includes a check that ensures that the ll address check and manipulation
will be skipped in case of shallow package copies.
The change also addresses problems related to the "overwrite" flag of the
package:
* Package cloning assumes the overwrite flag to be set. Otherwise it
will not work correctly. This was not ensured inside the clone method.
* Package cloning manipulates the overwrite flag of the cloned package
but does not reset it to represent the same state as the original
package.
The change introduces a fix and unit test assertions for both problems.
Fixes: #51265
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
These were never being initialized by the test, leaving an embedded
k_mutex as bare memory. That used to work (I guess?), it doesn't with
k_zync.
Signed-off-by: Andy Ross <andyross@google.com>
Several attributes in the ieee802154_context struct may potentially be
accessed from different threads and/or ISR context. Only some of these
attributes were properly guarded against race conditions.
This may not have been to problematic in the past but as other changes
in this PR introduce additional attributes and mutate several attributes
in a single atomic transaction, leaving such changes unprotected seems
dangerous.
This change therefore introduces systematic locking of the
ieee802154_context structure.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
IEEE 802.15.4 short address support is incomplete in several places.
This change improves short address support without claiming to fix
it everywhere. Future iterations will have to continue where this change
leaves off.
The purpose of this change was to:
* use the short address returned by association responses,
* automatically bind IEEE 802.15.4 datagram sockets to the short
address if available,
* use the short address in outgoing packages where applicable,
* improve validation of association/disassociation frames,
* model association more closely to the spec by tying it to the
existence of a short address in the MAC PIB thereby removing
redundancy in the PIB (which makes race conditions less probable),
* keep both, the short and extended addresses, of the coordinator.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This changes fixes several bugs and inconsistencies in the IEEE 802.15.4
L2 implementation. These bugs were revealed while documenting intended
endianness of driver, IP, socket and L2 attributes (see previous
changes).
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Some minor housekeeping prior to adding an http server
implementation. There are already a number of http headers
and that number will likely increase with subsequent work.
Moving them into a common directory cleans up the
`include/net` directory a bit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Adding tests to test the case where an invalid request code is
received. coap_handle_request() should return with -ENOTSUP.
Signed-off-by: Sagar Shah <sagar.shah@legrand.us>
