Adds mimxrt595_evk_cm33 target to the exclusion list for tests
as this board enabled i2c by default for regulator usage which
conflicts with the test.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When dealing with groups, the specified window in
linear_range_group_get_win_index can span across multiple groups. In the
current implementation, if maximum value was not in the same sub-window
as the minimum value the function would return -EINVAL. This patch fixes
the problem and updates test cases to cover such scenario.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Increase the min ram configuration when running the
libraries.cmsis_dsp.transform.cf64 testcase of the
tests/lib/cmsis_dsp/transform/
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/52284
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit removes the `mps2_an521_remote` board from the integration
platform list of the CMSIS-DSP transform tests because this board no
longer has a sufficient code memory (FLASH) to fit these tests after
the resizing done in the PR #52052 for TF-M compatibility.
Consider adding `mps2_an386` as an integration platform for these tests
once the support for it is added to Zephyr (refer to the issue #45319).
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Since the new CONFIG_ZTEST_NEW_API the ram fr execution
must be adjusted (higher)
to avoid buffer allocation failure s with some target board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Enable all cbprintf / logging related tests which were previously
disabled for qemu_arc_hs6x.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The MVE `arm_correlate_f32` and `arm_correlate_q31` implementations may
write to negative indices of the output buffer (refer to the upstream
CMSIS-DSP bug ARM-software/CMSIS-DSP#59).
This commit adds a workaround for the above bug by overallocating the
output buffer memory and offsetting the output buffer supplied to the
function.
Revert this commit when this bug is fixed.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
For tests that set CONFIG_MP_NUM_CPUS, switch to using
CONFIG_MP_MAX_NUM_CPUS instead as we work to phase out
CONFIG_MP_NUM_CPUS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This commit removes explicit `CONFIG_NEWLIB_LIBC_NANO=n` overrides
because the newlib nano variant is no longer enabled by default when
it is available.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Adds bt610 and bl5340_dvk_cpuapp* targets to exclusion list for tests
as these boards enabled i2c by default for GPIO usage which conflicts
with the test.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit removes the `mps3_an547` board from the integration
platform list for the tests whose minimum flash size requirement exceed
the size of the flash available on the board.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Follow up to e1e16640b5 adding model name
helpers to access generated macros based on a compatible's matching
entries in vendor prefixes.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Add a new Kconfig and build this code conditionally, so we do not end up
with this file being built for each zephyr app.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is no longer needed and currently generating a fault with this
backend. Using the ztest delay fixes the issue and produces the complete
console output.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, to compute the 'item' size in a ring buffer, we have
`SIZE32_OF`.
Several issues with this:
- `SIZE32_OF` only works on variables, not types, due to an extra
parenthesis pair. Indeed, `sizeof((int))` is not valid C, whereas
`sizeof((my_var))` is.
- `SIZE32_OF` is not a proper public API
- `SIZE32_OF` rounds down if the argument size is not a multiple
of 4 bytes.
Thus, we introduce a proper `RING_BUF_ITEM_SIZEOF`, fixing the
aforementioned issues.
Signed-off-by: Henri Xavier <datacomos@huawei.com>
Static packaging is using only argument types to build a package. There
is one case where analysing argument type only is not enough to
determine package content. That is %p with (unsigned) char pointer vs
%s. In case of %s a string might need to be appended to the package
and in case of %p it must be avoided. Format string analysis is required
to distinguish those two cases.
In order to speed up the runtime inspection, additional information is
added to a static package. That is index of the string argument (where
first argument has index 0). This information allows quick format string
inspection where nth format specifier is found and checked if it is a
pointer format specifier.
Inspection algorithm is added to cbprintf_package_convert() and if %p
is found then data for that argument is discarded. Additionally, log
warning is printed with suggestion to cast pointer argument to void *
to avoid confusion. It is desired to get rid of this ambiguity because
there are going to be logging configurations where strings are stripped
from a binary and runtime inspection cannot be performed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This adds a few bits to the devicetree API tests for multi-bus
nodes where a bus can support multiple protocols. This uses
I3C as basis as I3C controller can support both I2C and I3C on
the same bus, while I2C controller cannot support both. So
this needs to make sure the correct bus macros are generated
if appropriate (and not generated if not needed).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit changes some tests from using zassert_equal to validate
the pointers to using the zassert_is_null and zassert_not_null.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds vendor name helpers to access generated macros based on matching
entries in the vendor prefixes file.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Logging through winstream can miss logs when log output is
fast. The mem_blocks test suffer from this on CAVS platforms.
Add CAVS config overlays to use HDA logging instead.
Signed-off-by: Ming Shao <ming.shao@intel.com>
It is frequent to see in Devicetree code constructs like:
```c
#define NAME_AND_COMMA(node_id) DT_NODE_FULL_NAME(node_id),
const char *child_names[] = {
DT_FOREACH_CHILD(DT_NODELABEL(n), NAME_AND_COMMA)
};
```
That is, an auxiliary macro to append a separator character in
DT_FOREACH* macros. Non-DT API, e.g. FOR_EACH(), takes a separator
argument to avoid such intermediate macros.
This patch adds DT_FOREACH_CHILD_SEP (and instance/status okay/vargs
versions of it). They all take an extra argument: a separator. With this
change, the example above can be simplified to:
```c
const char *child_labels[] = {
DT_FOREACH_CHILD(DT_NODELABEL(n), DT_NODE_FULL_NAME, (,))
};
```
Notes:
- Other DT_FOREACH* macros could/should be extended as well
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
At some point, package copy function was extended and renamed
to cbprintf_package_convert. However, flags used by this
function were not renamed and used contained COPY idiom.
Deprecating flags with COPY and replacing them with flags
with CONVERT idiom to match function which is utilizing them.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are some platforms like the lpcxpresso54114 that utilize gpio@0
so rename gpio@0 to gpio@ffff as this is a highly unlikely to conflict
with any real device.
Fixes#49439
Signed-off-by: Kumar Gala <galak@kernel.org>
Improve stress tests to be more robust and demanding. Previous
implementation did not reveal race condition.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Wrong value was used for free space calculation. Updating test which
previously was hiding this bug.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
