Add board, project, and twister configuration for qemu_kvm_arm64 support
on ivshmem-plain test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Add board, project, and twister configurations for QEMU ARM64 support for
ivshmem-plain test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
The ivshmem-plain test does not use MSI at all; remove the dependency
from the project configuration.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Move the existing ivshmem test to a folder that explicitly identifies
its target: ivshmem-plain. The existing test is not compatible with
ivshmem-doorbell.
ivshmem-doorbell has additional requirements compared to -plain
(ivshmem-server, notification handling), so it is reasonable that
another test is required for it. This commits prepares the way for the new
test.
No funcional change intended.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
For making handle available in vendor sink creation, add ISO handle
to function prototype.
Expose datapath allocation via new ull_iso_datapath_alloc function.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Specification states that: "Only one Client Characteristic Configuration
declaration shall exist in a characteristic definition." This was
wrongly understood as "Ony one CCC can exist in GATT Server". When we
add next characteristic `ccc_added` flag is cleared so next CC can be
added (for this characteristic).
Added array for CCC values so it's no longer shared between CCCs.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This file was just built, but none of its functions were executed since the
commit 84a88f107c ("tests: subsys: settings: stream encoding tests"),
which introduced it.
At this point it makes little sense to make it run/working, mainly because
of:
* "line" encoding, which this module intends to test, behaves differently
based on Kconfig options like `bool SETTINGS_ENCODE_LEN`; this is set
differently based on (FCB/File) backend used, so it is hard to make this
"generic" tests work, because it is shared by all storage backends tests
* base64 encoding is expected in this test module, which was dropped 2
years ago in [1]
* settings subsystem has changed a lot during last 4 years, so those tests
might no longer be valid with current implementation.
[1] commit 55be783c85 ("settings: Remove deprecated SETTINGS_USE_BASE64
support")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This variable is just a copy-paste from FCB backend tests and actually has
no use in File backend tests.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
There are three settings handlers defined, but just the first
one (`c_test_handlers[0]`) is registered and used in NVS specific tests.
Remove unused handlers, as it is really a dead code.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Both functions are declared in `settings_test.h`, so there is no reason to
declare them locally as well.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Re-enable several mem_protect tests which were disabled due to
issues in ARC QEMU (which are fixed and fixes were propagated to
Zephyr SDK)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
`spi_is_ready` function is being deprecated in favor of
`spi_is_ready_dt` so let's replace the old usage in the tree.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Adds a missing menuconfig for the DSP library as well as fix an issue
with the zephyr library being a STATIC library and having no sources
in the case of the cmsis backend.
Signed-off-by: Yuval Peress <peress@google.com>
This feature is not used in most tests, as there is no logic in C code that
utilizes `#ifdef TEST_x` statement.
The only test that does that is `tests/subsys/settings/fcb/` where `#ifdef
TEST_LONG` is used, so leave that test case untouched.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
-- Corrected PDU time stamps to match expected reference anchor point
-- Corrected failing test_rx_unframed_dbl_split according to expected
time stamps.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Adds support for the Adafruit ItsyBitsy nRF52840 Express.
This board ships with the UF2 bootloader, so the device has
been set up so that Zephyr applications are flashed the
same way that other (Adafruit) firmware is flashed with the
UF2 bootloader.
This has been tested locally, and the button, blinky and
led_apa102 samples run without problems.
Signed-off-by: Embla Flatlandsmo <embla.flatlandsmo@gmail.com>
Remove declarations of ZTEST() routines in header file, because there is
simply no value in having it.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add support for setting the help description for each entry in a dictionary
command. Currently the syntax string alone may not provide sufficient
description of its entry. This commit also helps keep the help messages
consistent with existing style.
Signed-off-by: Xinyang Tan <xinyang.tan@delve.com>
Two simple fixes in zassert messages where one message has
been printing incorrect variable and other has been using
formatting to just print literal 0.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
... to avoid undesirable delays in waking up of the threads on
scheduled timeouts. In specific configurations such additional load
of the CPU can be even harmful to the test. This was observed for
nRF platforms where the UART_NRF_DK_SERIAL_WORKAROUND Kconfig option
was enabled.
All calls to TC_PRINT() in this test suite are replaced with calls to
LOG_DBG(), so the status messages are not printed by default, but they
can be enabled if needed by changing CONFIG_LOG_DEFAULT_LEVEL.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In the message reporting the wrong order of woken up threads
(e.g. "thread 3 woke up, expected 2"), provide indexes of
the threads in the timeout order array, not their timeout
order values.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds mimxrt595_evk_cm33 target to the exclusion list for tests
as this board enabled i2c by default for regulator usage which
conflicts with the test.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Update the relevant tests in basicmath to use the dsp subsystem. Note
that f16 is not updated since it's much more architecture specific and
did not become a part of zdsp.
Signed-off-by: Yuval Peress <peress@google.com>
Simple test for API rules, allocation, queue, and dequeu
of the endpoint requests. USB device controller should not be
connected to the host as this state is not covered by this test.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commits extracts mesh, gat, gap, l2cap from
bttester.h into corresponding header files for
better readability.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
When dealing with groups, the specified window in
linear_range_group_get_win_index can span across multiple groups. In the
current implementation, if maximum value was not in the same sub-window
as the minimum value the function would return -EINVAL. This patch fixes
the problem and updates test cases to cover such scenario.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Re-enable the CAAM for entropy
now that the HAL driver has been fixed
Job descriptors must be accessed coherently
between CAAM DMA and core.
The M4 Cores still do not work
because of mpu/cache/kconfig arch complications,
disable caam for M4 cores in DTS
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add a Kconfig option to put the buffer for random numbers
in the nocache region instead of on the stack.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The underlying Kconfig setting NET_BUF_USER_DATA_SIZE is not used anywhere,
so this define is removed here.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Configure through an overlay file, the stm32f3_disco board
for running the tests/drivers/spi/spi_loopback.
The SPI1 is selected: MOSI/MISO output pins are available
on the board.
Connect pin PA6 & PA7 of connector P1 to PASS the test.
Add the spi_loopback fixture.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure through an overlay file, the nucleo_l152re board
for running the tests/drivers/spi/spi_loopback with DMA.
Limit the spi speed freq to run the test correctly.
The SPI1 is selected: MOSI/MISO output pins are available on the platform.
DMA1 channel 2 & 3 are selected for SPI1.
Connect pin D11 & D12 of CN5 to PASS the test.
Add the spi_loopback fixture.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The test was broken by changes made in
9d175ca5f1 (device ready check was
commented before). Also removed redundant preconditions check, since it
is already done in the test.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Drop the async enable function. This feature is rarely/never used,
complicates driver design, and doesn't really follow the sync/async API
design/naming used in other areas. In the future we can introduce
regulator_enable_async if needed, with support from the driver class (no
onoff). Note that drivers like PCA9420 did not implement any
asynchronous behavior. regulator-fixed implemented in the past
asynchronous behavior using work queues, an overkill for most GPIO
driven regulators. Let's keep things simple for now and extend the API
when needed, based on specific usecases.
In the current implementation, reference counting is managed by the
driver class. \isr-ok attribute is dropped, since calls are potentially
blocking. Note that drivers like PCA9420 already violated such rule.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Unit test project for bt_keys_find_addr().
This part of subsys/bluetooth/host/keys.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
