Introduce the Kconfig symbol `NET_PKT_BUF_USER_DATA_SIZE`. It is used to
set the user data size in the buffers used in the rx and tx network buffer
pools.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
When testing on qemu_x86_64 with e1000 Ethernet driver, there are
several crashes due to list management simultaneously executing on
different cores. Add mutexes similar to other parts on networking
stack, for example tcp_lock.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
As per RFC 2236 Section 9, the IGMP V2 membership reports should be sent
to the group multicast address being reported. Without this fix, when
IGMP snooping is enabled on a network a device is not able to receive
multicast from certain multicast addresses e.g. 239.255.x.x.
Fixes#52449
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
This aligns the conditional compilation logic with the one used for the
prototype in net_pkt.h, avoids build errors due to a undefined reference
to net_pkt_print_frags.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The "net mem" command handler did not take the variable buffer length
configuration, and failed to build in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, net_pkt code did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, the TCP stack did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case Echo Request did not carry timestamp (i. e. requested payload
size was smaller than 4), there won't be a timestamp in the reply
either. Such replies should not be ignored. Instead, simply skip the
turnround time calculation if timestamp is missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add -s parameter to the net ping command, allowing to specify the
payload size for the Echo Request.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Let net_icmpv4_send_echo_request() and net_icmpv6_send_echo_request()
autogenerate Echo Request payload, in case data length is specified but
no data pointer provided. The autogenerated payload includes timestamp
(if payload size permits) so that the turnround time can be calculated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds support for incoming and outgoing IPv4 fragmented packet support,
allowing a single packet that is too large to be sent to be split up
and sent successfully.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
In order to avoid using multiple sources of truth for the platfom's
endianness, convert the in-tree code to use the (BIG|LITTLE)_ENDIAN
Kconfig variables exclusively, instead of the compiler's
__BYTE_ORDER__.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In case loopback interface is enabled, it's most likely there will be
more than a one network interface if running on real hardware. Therefore
increase the default IPv4/IPv6 interface count to avoid the need to
increase it manually in every test suite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of doing a 1-complement addition for every 16-bit word, process
32-bit words and handle the 1-complement addition at the end.
This work is a colaboration with Diego Pino García. The algorithm is
inspired by:
https://blogs.igalia.com/dpino/2018/06/14/fast-checksum-computation/
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Use a union to capture all big NET event structures with a default size
of 32bytes, this makes maintenance easier.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
NAK message should be processed in the RENEWING state just like in
REBINDING, not ignored.
Additinonally, NAK processing should include the rejected IP address
removal from the nework interface, otherwise the IP address will remain
on the interface indefinitely (i. e. until removed manually), which
might disturb further operation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It could happen, that the requested IP address, stored in the dhcpv4
config structure in the network interface, could get overwritten with an
unexpected message, for example NAK from the DHCP server. In result, the
DHCPv4 module was no longer able to remove the requested address from
the network interface, as it simply no longer remembered what the
address was.
Fix this, by setting the requested address only when it's actually
provided by the DHCP server, i. e. when handling the OFFER message from
the server. Accordingly, the requested address will be cleared when the
SELECTING stage is entered, where all of the cleanups should've already
be done.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function is no longer used, as its functionality has been replaced
with net_if_carrier_off().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align virtual L2 with interface state handling update. Introduce
net_virtual_enable() function, which gets called whenever a network
interface is brought up (operational). This, combined with already
existing net_virtual_disable() function, can be used to update the
carrier state on the virtual interface, based on the underlying
interface status.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When packet is passed to transmit at the net_if level, verify the
carrier state (NET_IF_LOWER_UP) instead of administrative state
(NET_IF_UP).
The administrative state is checked anyway at higher level (net_context)
so no need to verify it again. This will allow to still transmit control
packets for example when interface is in a dormant state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a new interface state management scheme, according to
RFC 2863. This includes the following changes:
* Introduce a new interface flag: NET_IF_LOWER_UP, along with
corresponding helper functions. The flag should be set/cleared on an
interface by a network driver/L2 to signalize physical readiness of an
interface to transmit data (for example cable plugged in).
* Introduce a new interface flag: NET_IF_DORMANT, along with
corresponding helper functions. The flag should be set on an
iterface when the interface is not ready to transmit application data,
for example still not joined a Wi-Fi network.
* Introduce a new interface flag: NET_IF_RUNNING, indicating that
interface is ready to transmit application data.
* Update the meaning of the NET_IF_UP flag - it now singnalizes whether
an interface has been brought up/down by the application (admin
up/down).
* Introduce operational state of an interface, derived from above. It
reflects the internal interface state.
The meaning of net_if_is_up() function and NET_EVENT_IF_UP/DOWN events
remains unchanged to retain backward compability - they reflect the
interface readiness to transmit application data.
To verify the administrative up/down state, a new function
net_if_is_admin_up() has been introduced, along with
NET_EVENT_IF_ADMIN_UP/DOWN events.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Socket offloading was not taken into consideration when network
interface was put down. Fix this by introducing a helper function, to
verify whether an interface is offloaded or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Improve the parse_arg() helper function used with shell ping command,
by allowing to parse arguments provided in hex.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new option to the net shell ping command, which allows to specify
the DSCP/ECN values for an outgoing ping request. The option is
compatible with Linux ping command.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for setting DSCP/ECN values for an outgoing ping request.
Additionally, copy DSCP/ECN values from an incoming ping request into
the ping response, like Linux does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for setting DSCP/ECN values for an outgoing ping request.
Additionally, copy DSCP/ECN values from an incoming ping request into
the ping response, like Linux does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a new net_context option, which allows to set DSCP/ECN values on a
net context. Those values are then encoded into outgoing packet
IPv4/IPv6 header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new fields to the net_pkt structure, representing IP-specific
Differentiated services code point (DSCP) and Explicit Congestion
Notification (ECN) values. Those values are encoded in legacy
Type of Service (IPv4) and Trafic Class (IPv6) header fields.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change implements part two of the program laid out in the TSCH RFC,
see #50336#issuecomment-1250250154 :
> Consolidate IEEE 802.15.4 options in net_pkt
This change improves decoupling of generic net core code from
IEEE 802.15.4 internals. It also simplifies IEEE 802.15.4
attribute cloning and thereby makes it easier to maintain and less
error prone (and probably even faster as individual bits are no longer
copied over separately).
This enables us to extend and design IEEE 802.15.4 L2 attributes inside
the package in isolation from the net core code which will no longer
have to be changed when introducing changes or additions to the flags.
This flexibility will be built upon in later change sets to model the
IEEE 802.15.4 attributes closer to the spec.
The solution is inspired by Linux's sk_buff->cb attribute which addresses
the same concern as the attribute introduced in this change set:
https://elixir.bootlin.com/linux/v6.0.1/source/include/linux/skbuff.h#L871
As the inline comment says: The cb attribute can be made a union or even a
uint8[something] in the future, if further L2s need a control block, too.
Right now such full indirection would make the code overly abstract, so
I chose to compromise with maintainability in mind.
Care has been taken to ensure that this changes does not introduce
additional padding into the net package. To maintain zero-padding, future
changes to the net packet struct will have to ensure that the
IEEE 802.15.4 struct is 4-byte aligned (iff the IEEE 802.15.4 struct
continues with max uint32_t scalar members) which is no deviation from
the previous implementation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The net packet structure contains pointers to link-layer source and
destination addresses. Usually, these structures do not point to
separately allocated memory but directly into the packet's data buffer.
In case of a deep package clone (which includes copying the buffer) the
copy of the ll addresses continued to point into the old package
(contrary to a rather misleading inline comment). This was proven by an
additional failing unit test assertion.
As the original package may be unreferenced while the cloned package is
still being accessed, the ll address pointers of the cloned package may
become invalid.
The fix consists of two parts:
* First it is determined whether a given ll address actually points into
the buffer and if so at which logical cursor offset it is located.
* If the address points into the package buffer then the cursor API is
used to determine the corresponding physical memory location in the
cloned package. The ll address of the cloned package is then patched
to point to the cloned buffer.
Additional assertions were introduced to the existing unit test to ensure
that the newly generated address points to the correct content of the
cloned package.
The solution is implemented in a generic way so that the previously
redundant implementations were consolidated into a single one. The code
includes a check that ensures that the ll address check and manipulation
will be skipped in case of shallow package copies.
The change also addresses problems related to the "overwrite" flag of the
package:
* Package cloning assumes the overwrite flag to be set. Otherwise it
will not work correctly. This was not ensured inside the clone method.
* Package cloning manipulates the overwrite flag of the cloned package
but does not reset it to represent the same state as the original
package.
The change introduces a fix and unit test assertions for both problems.
Fixes: #51265
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This is a public API for the subsystem, can be called from app
context, unlocks the local k_mutex on one of its three exit paths, and
it's quite clear that nothing ever locks that mutex!
The code used to work because k_mutex simply returned an error if you
tried to unlock an unlocked object. Now zync will panic (when
CONFIG_ZYNC_VALIDATE=y) if you try that.
Signed-off-by: Andy Ross <andyross@google.com>
Without pkt_unref(), the shell command "net udp bind" will fail to
receive after a few packets ("net allocs" shows that memory is still
allocated).
Signed-off-by: Andreas Müller <andreas.mueller@husqvarnagroup.com>
IEEE 802.15.4 short address support is incomplete in several places.
This change improves short address support without claiming to fix
it everywhere. Future iterations will have to continue where this change
leaves off.
The purpose of this change was to:
* use the short address returned by association responses,
* automatically bind IEEE 802.15.4 datagram sockets to the short
address if available,
* use the short address in outgoing packages where applicable,
* improve validation of association/disassociation frames,
* model association more closely to the spec by tying it to the
existence of a short address in the MAC PIB thereby removing
redundancy in the PIB (which makes race conditions less probable),
* keep both, the short and extended addresses, of the coordinator.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This is a follow up to commit bb86f8b967.
Also custom IEEE 802.15.4 based L2 implementations may need to use
packet handling without the IP layer. Add support for such cases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Zephyr doesn't seem to allow on adding route to the device from
which it received Router Advertisement without SLLAO field set
(in particular device that doesn't include Link Layer address).
Changes done:
* Added creating new NBR without Link Layer address set on RA
reception (LL is added only if SLLAO option is set, otherwise
NBR doesn't have LL address, but exists in the table and has
valid IPv6 link local address).
* Removed two asserts preventing from adding route to the NBR
that doesn't have Link Layer address set.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Since db11fcd174 [net/net_pkt: Fully
separate struct net_pkt from struct net_buf], net_pkt_compact() can not
fail anymore.
This commit acknowledges this and simplifies the API accordingly.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Allocated, but undersized packets must not just be logged, but also
unreferenced before returning an error.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
In the function find_available_port() a port is randomly selected. Because
the random value is always >= 0x8000, it is redundant to check if it is
<= 1023 afterwards.
This commit removes the redundant check.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
If a L2 link has been established, then the DHCP is taking too long as
it has to go through its capped exponential backoff timers to trigger
discover (The DHCP starts immediately during init, this is itself wrong,
it should start on a link UP notification) that delays the DHCP for
few seconds to a minute.
And if we do stop and start DHCP then also it goes through the initial
delays (though configurable), which is also not ideal.
Add support for restarting DHCP without any delay, i.e., release and
send discover immediately.
This is also useful in case L2 switches to a different subnet, in this
case Zephyr doesn't restart DHCP automatically, this API can be used by
L2 apps/drivers to restart DHCP to get new subnet IP.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
* reduced cyclomatic complexity
* group validation by family to make the validation easier to understand
and extend
* change preprocessor markup where possible to allow for complete code
elimination when features (esp. IP) are disabled
* renamed net_context_get/set_ip_proto() to net_context_get_proto()
While the latter is formally part of the public API and might therefore
have to be deprecated rather than renamed, it is considered internal API
by the net developers, see
https://github.com/zephyrproject-rtos/zephyr/pull/48751#discussion_r942402612
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
