Enable the openamp sample for RT1160EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable the openamp sample for RT1170EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
with sysbuild, DTS overlays for boards cannot automatically be passed to
the remote core. This means DTS overlays must be present for remote cores
as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add lpc54114 configuration settings to enable booting second core with
sysbuild, and LMA address adjustment
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC55s69 requires the second core to output a hex build to ensure the
image is flashed to the correct location, and uses the
CONFIG_SECOND_CORE_MCUX symbol in each core's build to indicate the build
targets a dual core config
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a sample presenting ipc_service working with icmsg multi endpoint
backend. The sample creates multiple instances of icmsg, one of them
consisting of two endpoints.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Now that IPM drivers are enabled based on devicetree we can
remove any cases of them getting enabled by Kconfig, *defconfig*,
and *.conf files.
We need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Make the sample exchange the data between cores
for predefined time. Clean up logging messages
and do not print transfer speed on each side.
This sample is now used to demonstrate functionalities
of ipc service with icmsg backend.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Names of some testcases are duplicated in another files.
This change rename duplicated testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
The preferred ipc service on NRF platforms is ipc_service. Remove
configuration for rpmsg_service and just utilize ipc_service.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove sample as its only supported on one platform, should really
utilize the ipc subsystem, and so forth.
For now its better to drop it and when we have something better we
can add that.
Signed-off-by: Kumar Gala <galak@kernel.org>
samples should not use CONFIG_TEST_EXTRA_STACK_SIZE, instead, they
should set the recommended stack size directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Recently OpenAMP introduced the possibility to set the sizes for TX and
RX buffers per created instance. Expose this also to Zephyr users by
using a DT property "zephyr,buffer-size".
For the sake of simplicity use the same DT property to set the buffer
size for both TX and RX buffers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Cleaned up the IPC configuration for nRF5340 SoC in Device Tree. This
change fixes the (simple_bus_reg) warning about the missing or empty
reg/ranges property.
This is a follow-up to commit cf6a58d.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is a follow-up to commit cf6a58d3f6.
Restore the "nordic,nrf-ipc" compatible property in mbox nodes for both
nRF5340 cores and use it together with the new "nordic,mbox-nrf-ipc"
one. This way either the MBOX or the IPM driver can be used for these
nodes without further modifications. This eliminates the need to use
overlays in quite a few cases, so remove all those no longer needed
ones (which are also a bit confusing now as they refer to no longer
existing ipc@2a000 and ipc@41012000 nodes).
Restore also the ipc node label removed in the commit mentioned above,
as the label is used in validation of base addresses of nRF DT nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of having one single WQ per backend, move to one WQ per
instance instead and add a new "zephyr,priority" property in the DT to
set the WQ priority of the instance. Fix the sample as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This is a device-specific option and should therefore not be activated in
a generic project. Since the only boards that use this Kconfig symbol
(lpcxpresso54xx, lpcxpresso55sxx) don't build anyway, this option could
be removed. The device/board specific configuration should be placed in
the boards folder along with an appropriate device tree describing the
IPC nodes.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Add the support of a rpmsg tty channel that responds to the generic
Linux rpmsg_tty driver.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Restructure to separate the management of the rpmsg stack
add the rpmsg client into 2 threads.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The Bluetooth HCI driver based on the RPMsg transport now uses the IPC
service module. The compatible Bluetooth sample - HCI RPMsg - has also
been migrated to the new IPC solution.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add a simple sample that tries to answer the silly question: how fast
can I move data from one core to another using OpenAMP?
It depends on a lot of factors but at least we can use this sample as a
skeleton to build tests on top.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Various obsolote and misnamed platfomrs in test filters theat went
undetected for a while.
Fixes#41222
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Search and replace `message(INFO " ` with `message(STATUS "`.
This would otherwise print "INFO <message"
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Currently the IPM samples are hosted in the IPC sample location. Clean
this situation up by moving the IPM samples to a new location.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
As part of the work to support multiple IPC instances / backends using
IPC service, the static vrings mi code must be reworked to resemble a
classic device driver.
Fix also the sample using it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Only one single IPC service backend is currently present: multi_instance
backend. This backend is heavily relying on the RPMsg multi_instance
code to instanciate and manage instances and endpoints. Samples exist
for both in the samples/subsys/ipc/ directory.
With this patch we are "unpacking" the RPMsg multi_service code to make
it more modular and reusable by different backends.
In particular we are re-organizing the code into two helper libraries:
an RPMsg library and a VRING / virtqueues static allocation library. At
the same time we rewrite the multi_instance backend to make fully use of
those new libraries and remove the old multi_instance sample.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
