The DFU documentation has been extended with MCUboot API
chapter and API reference, from mcuboot_api Doxygen group.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Flash img API is used for writting image application image
to flash and is rather part of DFU than storage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Log modes other than the deferred may cause unintended delays during
processing of log messages. This in turns will affect scheduling of the
receive delay and receive window for both, Friend and LPN.
Adding a compilation warning instead of assert as a user may still want
to compile a code with friendship feature enabled without actually
establishing a friendship.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Clarify:
- Board directory name does not need to match board name
- Give example of multi board directory
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Includes reference to esp32 deep sleep sample code
to system power management documentation,
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Introduce an API mirroring the CMSIS-DSP's basicmath. If CMSIS_DSP is
enabled, then it will by default be used as a backend. Developers may
opt into a custom backend by setting CONFIG_DSP_BACKEND_CMSIS=n. If
done, the application must provide `zdsp_backend/dsp.h` and optionally
implement the functions in its own .c files.
Signed-off-by: Yuval Peress <peress@google.com>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add section which describes coexistence of printk and logging
and the behavior of LOG_PRINTK with information that it is by
default enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Renames almost all occurences of VCS to VCP, as we want to
use the profile as the namespace for volume control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename vcs.h to vcp.h to better detail what the
file contains, as it is more than just VCS. This also
renames the Kconfig file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Renamed remaining structs and functions that are not
for the set coordinator to use the set member CSIP
role name.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed the coordinated set implementation to use the
profile (CSIP) name instead of the service (CSIS) name, as
the former is more general.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These functions are no longer needed with the centralized framework for
scanning for available PCIe devices and discovering their BDF value
through it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add description of how relative devicetree overlay files are picked up
from the application configuration directory.
Also add a link to detailed description of application configuration
directory.
This aligns the devicetree overlays with the description found for
Kconfig configuration files.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update the Getting Started Guide and the Zephyr SDK documentation to
point to the Zephyr SDK 0.15.2 release.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Currently there is inconsistency in repository file names, APIs, Kconfig
options and documentation around file / file-system backend for settings
storage, as both "file" and "FS (file system)" are used. As an example,
there is `CONFIG_SETTINGS_FS` Kconfig option, but the file that implements
this settings backend is called `settings_file.c`. Another example are
names of static functions that implement settings storage API:
`settings_file_load()`, `settings_file_save()` and
`settings_fs_storage_get()`.
This backend is actually storing all settings in a single file, so it makes
sense to use "File" as the name of backend, instead of a more general
"FS" (which would make sense if several files would be used to store
settings).
Fix inconsistency in used wording in the tree and unify it to "settings
file backend". This naming is more precise to how the implementation looks.
It will also make it easier to grep through the codebase and analyze
existing code.
Deprecate settings_mount_fs_backend() function and all Kconfig options
starting with `CONFIG_SETTINGS_FS`.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Since we can include other binding files at any level (child,
grand-child, etc.) it makes no sense to maintain two copies of pinctrl
props definitions (pincfg-node/pincfg-node-group). Instead,
pincfg-node.yaml defines props at root level, and it is included where
needed, either child-binding or grandchild-binding.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add the local advertising address to bt_le_ext_adv_get_info.
This may help with debugging, but is also needed to
properly support something like the BAP Broadcast Assistant.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Kconfig uses commas to separate macro arguments.
Improve Kconfig documentation by describing to users how this can be
handled when using devicetree Kconfig macros when using devicetree names
which may have commas in them.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove Kconfig file samples/subsys/usb/usb_pid.Kconfig added in
the commit e5cbe6a9e7 ("usb: cdc: Add unique PIDs for each sample")
with the motivation to have a separate ID for each sample supposedly
to be recognizable by the host.
The new USB support does not use the options, VID/PID is set
directly in the application. As a note, it is not necessary to have
unique PID for each sample, especially for the well known USB classes.
Replace the individual Kconfig options in the documentation
by a table with the references to the samples and PIDs.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This patch allows copying a URL to the current Kconfig search results.
For example, I can now share the search results for "CONFIG_TEST.*". A
new button is added to the search box that, when clicked, copies to the
clipboard the URL.
This feature is achieved by prepending query hashes with '!'. When '!'
is found, the content of the URL hash is left intact, whereas before it
was always enclosed within '^$' to produce an exact match.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If two modules started with the same prefix, e.g. nrf and nrfxlib, the
file name prefix was incorrectly set with the common prefix. Include
trailing "/" to the comparison, so that we match the full module name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add dt_node_has_compat kconfig function, to check if a node path has a
given compatible string while parsing kconfig files
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add dt_node_parent kconfig function, to get parent path for a given
devicetree path when parsing kconfig files
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Aside from base properties (maybe for documentation purposes),
`required: false` should not be encouraged.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Document the stable API change in the net_pkt API along with the
expected action from the existing applications.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The commit moves MCUmgr SMP transport documentation from
subsys/mgmt/mcumgr/lib to doc/services/device_mgmt.
Documentation have been rewritten for that purpose.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Rename BASS to BAP Scan Delegator and BASS Client
to BAP Broadcast Assistant. This is the first step towards
integrating the BASS with the rest of BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add property mxicy,mx25r-power-mode to jedec,spi-nor binding for
controlling low power/high performance mode on Macronix MX25R* Ultra Low
Power flash devices.
- "low-power" configures the flash in ultra low power mode.
- "high-performance" configures the flash in high performance mode.
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Add zbus message bus as a Zephyr subsystem. No message bus
or communication abstraction other than the usual (message queues,
mailboxes, etc.) enabled developers to implement event-driven systems in
Zephyr quickly. Zbus would fill that gap by providing the community with
a lightweight and flexible message bus. The implementation tries to be
closest as possible to the existing ones. We use the claim/finish
approach, and the API for publishing and reading channels are similar
in message queues. Zbus is about channels, messages, and observers.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
This commit adds support for compiling in support for several different
regions/frequencies and dynamically choosing which to use in run-time.
This commit introduces no API breakages - if a prj.conf contains only a
single region Kconfig, the new function lorawan_set_region() does not
need to be called.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
Added another custom role `module_file` which functions like
`zephyr_file` but for any module in the west manifest.
The new role must take a module as an argument. Example syntax:
```rst
:module_file:`module-name: path/within/module`
```
or with custom link text:
```rst
:module_file:`my link text <module-name: path/within/module>`
```
This change also moves the hardcoded project name and link to
github to `doc/conf.py` by adding the configuration values
`link_roles_manifest_project` and `link_roles_manifest_baseurl`
Signed-off-by: Gaute Svanes Lunde <gaute.lunde@nordicsemi.no>
