The functionality of the MPU depends on userspace, which has not
been implemented on AArch64. Therefore we skip that case for now.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The stm32 wwdg driver was currently tested only on disco_l475_iot1.
Additionally add nucleo_f091rc, such that one board with an CM0 core is
tested. And add nucleo_g431rb, that one board is included that has
newer register mapping and a 128 prescaler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Limit adafruit_2_8_tft_touch_v2 sample variant execution to the boards
that have this shield available.
In order to run the test in CI bench, add the following in
twister map.yml file on matching board:
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
For instance:
- connected: true
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
id: 0673FF323535474B43171415
platform: nucleo_f429zi
product: STM32 STLink
runner: openocd
serial: /dev/ttyACM0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the nanopb library and generator tools as a module.
Nanopb is a small code-size Protocol Buffers implementation in ansi C.
It is especially suitable for use in microcontrollers,
but fits any memory restricted system.
Nanopb home: https://jpa.kapsi.fi/nanopb/
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Ups the CDB_NODE_COUNT config to fit 16 nodes, to make the sample more
usable for general mesh testing.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds blocking operation to the self configuration step by waiting for
the status response. This ensures that the provisioner is fully
configured, and reduces the number of loopback buffers required for the
self-configuring.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Runs the Provisioner sample's main thread in a cooperative priority to
avoid calling the Bluetooth APIs from a preemptive thread.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Instead of only configuring the Health Server model of the provisioned
device, the Provisioner will instead walk the target's composition data,
and bind each model to the same AppKey. This allows the provisioner to
be used with the base mesh sample, and demonstrates the new composition
data page 0 API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a new sample configuration to build the fat_fs sample with the
adafruit_2_8_tft_touch_v2 shield and SDMMC SPI driver in CI. It has been
tested with frdm_k64f and mimxrt685_evk_cm33 boards, but should work
with any board that supports Arduino SPI and Arduino GPIO features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add an overlay-capture.conf file that can be used to allow network
packet capturing in this sample app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A simple application that allows you to use net-shell to
configure network packet capturing. The captured packets are
sent to external systems for processing. This can be used
for debugging network protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some tools consider this as commented code because of the ifdef, so
remove that and fix a coding guideline violation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds a sample of setting up and using an ISO central as
a source of ISO data. This will periodically send ISO
data to a connected ISO peripheral with varying sizes.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This sample is a bit messy; clean it up.
Remove unused includes, add missing include guards, clean up the
separation of responsibilities between main.c and the button and LED
helper files by moving code around, and replace the now-outmoded
device_get_binding() calls with GPIO_DT_SPEC_GET().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Drop device_get_binding() for microbit, using a gpio_dt_spec instead.
Rename the 'button' global to 'button_work' since it's a k_work
related to the button and does not actually represent the button
itself.
Fix a typo in the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Save a bit more SRAM on bbc_microbit by tuning some Kconfigs.
Mark some arrays const to try to avoid stack allocating them while
we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET on the chosen node directly.
The only in-tree board using the Kconfig option is rv32m1_vega_ri5cy.
It already sets the chosen node in the application overlay, albeit
incorrectly, so just fix it there and remove the now-redundant Kconfig
setting. That in turn triggers other build errors for this board, but
they don't seem to be related to this sample.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET_ANY instead of hard-coding a device label property.
As far as I can tell from in-tree drivers, "TEMP_0" is nRF specific
and refers to nodes with compatible "nordic,nrf-temp", so use that and
clean up the driver Kconfig while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
To allow using TFM NS interface without enabling
CMSIS_RTOS V2 support. And to allow using TFM NS
code that uses logging.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Populates the onoff server stubs in the Bluetooth Mesh sample, and
implements generic LED based hardware support to include more boards.
Fixes#31031.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Now that we can use the adafruit_2_8_tft_touch_v2 shield with
mimxrt685_evk_cm33 and frdm_k64f boards, start building the display
driver and lvgl samples for these boards in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Rename lib.
Disable AUDIT_LOG in regression sample because of a bug upstream.
Update stm32l562e_dk_ns overlay.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Don't allow user to choose CPU_ARCEM / CPU_ARCHS options
but select them when exact CPU type (i.e. EM4 / EM6 / HS3X/ etc)
is chosen.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
shell_uart_release command shows how shell can be uninitialized and
release transport resources (uart) and reinitialized at runtime.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Using the new obscured user shell input feature,
provide examples of using it in login and logout commands.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
This patch removes sdhc_api references since such API
does not actually exist. SD card controller drivers
use disc driver interface. Accordingly, the SDHC documentation,
which actually describes how to connect a SD card via SPI
and has little to do with SD host controller (SDHC),
is also moved to disk access page and adapted.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
