Enable HAS shell only if preset support is enabled. Otherwise there are
no functions yet that can be exposed if the preset support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The bluetooth ISO shell module now supports the newly
added central and peripheral ISO configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The audio stream receive callback now contains a
recv_info struct, which contain crucial information
such as timestamps and packet validity.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The values represent an enum, and it makes sense for the
enum values to follow the enum type name, so an
_DIR_ infix was added to the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Many functions and struct fields had the directory/type
value, but named in different ways and stored in different ways.
This change updates all uses of it to use the same name
and type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The enum bt_audio_pac_type does not fully
represent the what the value is used for.
The typical use of it is not for just published
audio capabilities (PAC), but rather describes the
type, or direction, of audio endpoints.
For the unicast client, the type/direction is
relative to the unicast server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change bt_audio_broadcast_sink_sync to use an array of pointers
to bt_audio_streams, instead of an array of streams. This makes
the API more flexible, as well consistent with the broadcast
source and unicast APIs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_audio_broadcast_source_create function will now
take an array of stream pointers, instead of an array
of streams. This is to make the API more flexible as
well as more consistent with the unicast API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_audio_unicast_group_create, bt_audio_unicast_group_add_streams
and bt_audio_unicast_group_remove_streams to use an array
of pointers, instead of an array of streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Changes the media_proxy API to pass structs by reference instead of by
value.
Also pass structs by reference in internal functions in media player
and in media controller test.
Add pointer checks to the public API implementation where
user/application code provides structs by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Changes the media control client API to pass structs by reference
instead of by value.
Also change internals of test to pass struct by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Making sure struct bt_l2cap_chan has absolutely no members related
to dynamic channels.
That way we ensure that there is no overhead for a build where only
fixed channels are used.
It's not enough that the dynamic channel-related members are put behind
ifdefs - they should be completely moved out from the struct definition.
Furthermore, the public l2cap.h header file already has a struct
that's meant to be used for dynamic channels: struct bt_l2cap_le_chan!
However, currently dynamic channel support is a mess - it's a mix
between these two structs. The bt_l2cap_le_chan struct should really
be an extension of the bt_l2cap_chan struct, i.e. the former should
contain as a member the latter.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Separate out the Kconfig for the media player.
Also removes some unused MCS configs.
The media player has been using MCS configs, while it should be the
other way around.
Also, this will make it easier to move the media player elsewhere, as
has been discussed.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This adds support for the following Direct Test mode
commands:
- HCI LE Receiver Test [v3]
- HCI LE Transmitter Test [v3]
- HCI LE Transmitter Test [v4]
Those commands set add a possibility to test an CTE
reception and transmission. The HCI LE Transmitter
Test [v4] commands allows also setting a transmit power.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
There are no more context defines specific to metadata, the ones
coming from Assigned Numbers shall be used.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The capabilities callback did not provide information about
the type of the endpoint being configured, making it
impossible for the application to determine if it is a
sink or source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Audio streams as defined by the BAP spec does not
support bidirectional audio streams. This commit
updates the API and implementation to match that.
The use a bidirectional CIS with 2 audio stream will
be added in a future commit.
This removes the _IN_ and _OUT_ and _INOUT_ QOS
values, as well as the direction of the codec QOS
struct.
To keep direction for internal use, the direction
has been added to the endpoint struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make it consistent for audio.h and capabilities.h that the
array size parameter appear after the array parameter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move the instance as the first parameter of the client function calls
and callbacks, for consistency with the server implementation.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Move the metadata request bitfields to the common header files.
This is part of merging the ots_client and ots header files.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The media control client shell must include the OTC header file.
(It is currently indirectly included via otc_internal.h.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Extend the command "bt appearance" to take an optional argument, which
is used to set the appearance.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The new command "bt appearance" prints out the current Bluetooth
Appearance Value.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Guards the `recv` callback for just unicast and broadcast sink
builds, and removes the usage of it in broadcast_source.c
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The callbacks were implemented to notify the application
about the state of the ISO. However, since then, callbacks
such as `started` and `stopped` have been implemented,
and as such the `connected` and `disconnected` callbacks
no longer server any purpose.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Merges bt_csis_client_discover and
bt_csis_client_discover_sets, as they should be done
together for the discovery procedure from the CSIP
spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
