Comparator will monitor signal though ADC channel, based on
user configuration, callback will be triggered.
This will enable comparator functionality for nuvoton MCU utilizing its
ADC threshold detection feature. Implementation is exported through
sensor trigger API. Use of CONFIG_ADC_CMP_NPCX is required.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
This is a follow-up to commit 1a01ca2adf.
Since support for pinctrl has been added to the qdec_nrfx driver,
the related binding can no longer require the `a-pin` and `b-pin`
properties to be defined.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add DT option to configure the data ready interrupt mode.
Latched is the default; pulsed can be enabled through
the drdy-pulsed DT, if desired.
Signed-off-by: Maxime Vincent <maxime@veemax.be>
Add FDS (Filtered Data Type Selection) + High-Pass reference mode support
(FDS in CTRL6, HP_REF_MODE in CTRL7)
Values are configurable through DT per instance.
Signed-off-by: Maxime Vincent <maxime@veemax.be>
the icm42670 from Invensense/TDK is a 6-axis accelerometer with
gyroscope and temperature sensing capabilities.
this initial driver does not support the devices 2K FIFO or many of the
other advanced features. Instead, only basic features are implemented.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
This update Atmel sam qdec sensor driver to use pinctrl driver and API.
It update board and sample with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add support for the new pinctrl API to the nRF QDEC driver.
Update code of the driver and the related devicetree binding.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Allow movement detection to be used on hardware
that only has one interrupt line connected.
Change hardware configuration to a bitmask.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This commit implements the temperature sensor interface for
the Maxim MAX31875Low-Power I2C Temperature Sensor.
Signed-off-by: Pete Dietl <petedietl@gmail.com>
This PR adds the different handling of temperature sensor for the
STM32L5 soc. In this soc, there are some calibration settings which
need to be applied for temperature conversion.
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
The dts binding general rules document states that the property
description should explain why the default value was selected
(e.g. "default is the value at power-on").
See comment in #41143
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move odr and range properties for both accelerometer and gyro
from Kconfigs to Device Tree.
Fixes#41117
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix the yaml dts multi-line property description in the following
(expected) way:
description: |
PUT_TEXT_HERE
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Adding support for the TI TMP108 temperature sensor. This includes
over/under temp interrupt support as well as one shot, continuous
conversion and power down modes.
Signed-off-by: Jimmy Johnson <catch22@fastmail.net>
Create an explicit ina230 driver which is supposed to
work with 230 and 231 variants. While at it switch
to i2c_dt_spec helpers and change device-tree node
names to use - instead of _ in order to follow
convention.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Create a common properties file that will be included by all bindings
(as i2c and spi) handled by lps22hh driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move odr options from Kconfigs to Device Tree. Moreover add
in DT a power-mode option to select among 4 possible values
(PD, LP, HR, HF). The power mode cannot be currently set from
sensor APIs.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Create a common properties file that will be included by all DT
bindings (as i2c and spi) handled by lis2ds12 driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Implements a shim layer driver using st hal for
I3G4250D gyro, mounted for example on stm32f3_disco_E.
No support for triggers included yet.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
This adds basic support for the Silabs Si7210 hall effect magnetic
position and temperature sensor. It is able to get magnetic field and
temperature in the default scale of the sensor (depending on the
variant). It also supports going into sleep mode without measurements
through the device power management infrastructure.
It is most notably missing support for scale change, measurement
averaging and filtering, and alert pin configuration (threshold,
hysteris, tamper).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds support for the TI INA219 Zero-Drift, Bidirectional
Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
Rename:
- grove,light to seeed,grove-light
- grove,temperature to seeed,grove-temperature
The "grove" brand applies to a family of products by Seeed (sic):
https://www.seeedstudio.com/category/Grove-c-1003.html
Therefore we should use the existing vendor seeed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be "maxim,max30101", because the vendor prefix for this
company is "maxim", not "max".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing dts binding for sensor, this was causing build errors with
CONFIG_PM set on bt510/bt6x0 boards.
Fixes#37675
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add optional support for the DRDY/INT pin. This avoids waiting a fixed
time for the temperature and humidity conversion to finish.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This driver supports the TI INA230 and INA231 Bidirectional Current
and Power Monitors. The devices work on the I2C interface and are
created from DT nodes with a compatible property matching "ti,ina23x".
The following datasheets were referenced while developing the driver:
https://www.ti.com/product/INA230https://www.ti.com/product/INA231
Twister passed:
twister -T tests/drivers/build_all/sensor/
Testing was performed on the stm32g071b_disco board with the following:
Load: ~170 ohms
Voltage: 5V
Measured Values:
Voltage: 5.1 V
Current: 0.032 A
Power: 0.157 W
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Add support for power management and the shutdown mode for bq274xx fuel
gauge sensor. This now allows boards that have any kind of low power
mode to turn on or off the sensor.
Tested on a Company's custom board with bq27421 sensor on it.
Signed-off-by: Luka Lopotar <luka.lopotar@greyp.com>
This commit adds a driver implementation for the LM75 I2C temperature
sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@leica-geosystems.com>
Add driver for sensirion consumer humidity sensor line.
Supports shtc1 and shtc3, but only shtc3 is tested.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add basic support for TI HDC20XX series (e.g. HDC2010, HDC2021, HDC2022,
HDC2080). It is able to get temperature and humidity in the default
14-bit resolution. Triggers, resolution selection, interrupt line, auto
measurement mode are currently not supported.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
