Start using DTS values for PCI Vendor ID and PCI BDF. For the PCI
Device ID we do not use DTS since this would require changing overlay
for different SKU board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove missing printout, and add the last line of printout.
Note that it's not possible to run this on hardware using Twister as of
now, since west flash will not flash tfm_s.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Exlude native_posix platform from USB samples but
add build-only test case.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
socket_can_generic.h makes some assumptions that are not always valid
for various drivers with regards to numbering. To clean this up we
add defines for SOCKET_CAN_NAME_0 and SOCKET_CAN_NAME_2 in addition to
SOCKET_CAN_NAME_1.
We also move struct socket_can_context into the drivers themselves
since they know best how many CAN interfaces are getting supported and
what naming/number convention they'd have.
Additionally, this also exposes a few other build issues with the
can_mcux_flexcan driver that get fixed.
Finally, we remove the platform_allow from samples/net/sockets/can
since it is no longer needed.
Fixes#31733
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Fix stack overflow in the TX power control sample.
Current stack usage with 0.11.1 zephyr toolchain was at 100% stack
usage of the DYN TX stack.
Fixes: #31433
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Similarly to what was done for watchdog test,
update watchdog sample to be compatible with stm32 window watchdog
and enable testing by twister.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
APL ADSP doesn't boot with reset-vector.S in the bootloader,
move it over to the main application binary.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add some changes to adc sample to enable valid verdict generation
using twister:
-Replace 'single_line' keyword with correct 'one_line'
-Remove parenthesis from the sample output to enable regex verdict
-Add timeout to save time in execution
Additionally, add support for disco_l475_iot1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove the deprecated scan filter duplicate enum values and parameter.
This was deprecated for the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
In the last step of the example, the system should go into soft off
state in order to match the original intent in the example to go
into the hardware's SHUTDOWN mode.
Fixes#31727
Signed-off-by: Vincent Wan <vanti.coder@gmail.com>
SPARC systems take a huge penalty in stack usage due to register window
saves. A recent patch reverted SPARC-specific increases to various
stack sizes, causing this test to fail.
Other platforms are excluded because of stack limits, so do that here
too.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Mcumgr-cli application doesn't accept log on the communication
channel. Since #30370 was merged log messages are generated from
MCUBOOT_UTIL by default. That made `mcumgr image upload` failing.
Patch disables logging via shell which cure the issue.
It is not necessary if another application on the host intercepts
log messages (like picocom can).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
After the latest upmerge, OpenThread requires explicit configuration
of the Master Key. This commit adds a Kconfig symbol that can be
used to setup its value. By default no Master Key is configured and
OpenThread generates a random one.
The Sockets Echo samples are configured with a fixed key with this
commit.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If CONFIG_LOG_BACKEND_NET_AUTOSTART is disabled, then the syslog
network backend is not started automatically. This option is
enabled by default but it might be that application needs to
start the backend manually if the network is slow to start or
some special routes needs to be set by the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Mass-erase the flash prior to running the sample to ensure the storage
partition can be initialized correctly.
Fixes: #30477
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This sample shows how to use the ADC API. Depending on the support of
sequential reads in the driver, 1 or 2 channels are read and printed.
A devicetree overlay is necessary to specify the used ADC channel(s).
Signed-off-by: Martin Jäger <martin@libre.solar>
The flash shell can now build when there isn't a chosen
zephyr,flash-controller available, so we can simplify the filter to
apply this sample to more boards.
Two STM32 H7 board configurations are excluded because the flash driver
isn't supported yet on the M4 core.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Change subsystem to use struct pm_state with substate-id instead of
using only the power state category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add EDAC shell application demonstrating EDAC API usage. Can be used
for verification of the functionality with error injection mechanism.
Sample is also included in the twister tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Provide a demonstration of using the timeutil skew infrastructure to
measure the relative error of the two clock sources on Nordic boards.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove UP Squared support for the gpio sample that was merged after
the sample itself was removed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Due to the routing, the ip_k66f board can only use RTT to export
console. With this change the SHELL is enabled to get access
to network commands (like ping).
To use it with RTT from Segger:
-------------------------------
On HOST (terminal 1):
./JLink_V664/JLinkRTTLogger -Device MK66FN2M0XXX18 -RTTChannel 1 \
-if SWD -Speed 4000 ~/rtt.log
On HOST (terminal 2):
nc localhost 19021
(19021 is the port number for the Segger RTT server)
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The 'local-mac-address' nodes are helpful for assessing if the LLDP like
example of DSA switch works correctly.
As those are used only for testing (or when user explicitly needs them),
those are added as DTS overlay to DSA example.
The 'local-mac-address' properties will be visible when one assess the
LLDP response from ip_k66f board (each LAN port has different IP
assigned).
Example output from 'tcpdump -v -i eth0':
-----------------------------------------
Chassis ID TLV (1), length 7
Subtype MAC address (4): 00:00:12:13:00:37 (oui Unknown)
Port ID TLV (2), length 7
Subtype MAC address (3): 00:00:12:13:00:37 (oui Unknown)
Time to Live TLV (3), length 2: TTL 120s
System Name TLV (5), length 13: ip_k66f LAN:3
End TLV (0), length 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This patch brings simple example on per DSA port LLDP filtering based on
MAC address of received packet.
Each lan1, lan2 and lan3 ports handle separately LLDP packets going into
them.
Nonetheless, the K66F ENET handles correctly all other packets types -
to be more specific - ICMP, TCP/IP.
Setup -> ON HOST:
Configure/start the lldpd daemon (debian 10) on host to use
MAC 01:80:c2:00:00:03:
(lldpd -ddd & ) && sleep 2 && \
lldpcli configure lldp agent-type nearest-non-tpmr-bridge
Signed-off-by: Lukasz Majewski <lukma@denx.de>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch modifies Bluetooth HCI RPMsg drivers and samples to use
RPMsg Service instead of configuring OpenAMP directly in the driver
or the sample.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
'main' function should retun 'int' and not 'void'. Otherwise
some picky compilers (like ARC MWDT) would warn about that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
