Introduce a custom HCI driver for the native POSIX port, which opens a
HCI User Channel socket to the Linux kernel to gain access to a local
Bluetooth controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With updates to bt_gatt_notify and bt_gatt_indicate it is now possible
to pass the Characteristic attribute instead of its value which makes
the code able to verify if attribute properties are set correctly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_GATT_CHARACTERISTIC now expands to 2 attributes it may be
confusing to use bt_gatt_indicate as that expects the Value attribute to
be given which is no longer visible, so this enables the user to use
the Characteristic attribute in addition to its value.
Fixes#8231
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_GATT_CHARACTERISTIC now expands to 2 attributes it may be
confusing to use bt_gatt_notify as that expects the Value attribute to
be given which is no longer visible, so this enables the user to use
the Characteristic attribute in addition to its value.
Fixes#8231
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When att_disconnected is called a thread may be waiting for the tx_sem
but that is memset to 0, furthermore there exists a flag
ATT_DISCONNECTED to indicate the context is no longer valid so instead
move memset to bt_att_accept so it is cleared when it is about to be
reused.
Fixes#8083
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The adv_send() function was incorrectly decoding the 5-bit value (it
was using it directly as milliseconds), which effectively lead to the
code always picking the controller's minimum supported interval.
Fix this issue, but do it by simplifying the (re)transmission state
tracking so that the state is always stored in the original "packed"
8-bit value, where 5 bits are reserved for the interval, and 3 for the
count.
Fixes#7972
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We should check for valid lengths, not just because flash may have
become corrupted, but also because this fixes coverity errors, such as
CID 186030.
Fixes#7739
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In certain cases the response to a command can come in the form of a
non-priority event. This is the case of LE Create Connection Cancel,
which generates a Command Complete and then an LE (Enh) Connection
Complete. Take this case (and other future ones) into account by calling
the correct Host recv function.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some versions of gcc do not seem to compile out the inaccessible code
in this case and instead give the following error:
subsys/bluetooth/host/mesh/transport.c:419: undefined reference to
`bt_mesh_lpn_poll'
This happens at least when building samples/bluetooth/mesh for
native_posix on Fedora 28.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove non-existent Kconfig symbol references. An additional (but
related) change is the removal of all persistent storage symbols from
the Arduino 101 Bluetooth shell app, since BT_STORAGE no longer
exists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Bluetooth core specification splits the valid LE L2CAP PSM range
into two subranges:
- Standard, SIG-assigned fixed PSM values in the range 0x0001-0x007f
- Dynamic, allocated at runtime in the range 0x0080-0x00ff
Previously the bt_l2cap_server_register() API was assuming that the
app would always decide the PSM, which effectively made it impossible
to have collision-free dynamic PSMs. This patch extends the
implementation so that if server->psm is 0, then the stack will look
for a free PSM from the dynamic range and take it into use.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having an ivu_unknown variable to track when we can ignore
the 96-hour minimum duration requirement, simply set the duration to
the minimum (96 hours) in the places where ivu_unknown would have been
1.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the IV Update state enters Normal operation or IV Update in
Progress, we need to keep track of how many hours has passed in the
state, since the specification requires us to remain in the state at
least for 96 hours (Update in Progress has an additional upper limit
of 144 hours).
In order to fulfil the above requirement, even if the node might be
powered off once in a while, we need to store persistently how many
hours the node has been in the state. This doesn't necessarily need to
happen every hour (thanks to the flexible duration range). The exact
cadence will depend a lot on the ways that the node will be used and
what kind of power source it has.
Since there is no single optimal answer, this patch adds a new
configuration option, which allows specifying a divider, i.e. how many
intervals the 96 hour minimum gets split into. After each interval the
duration that the node has been in the current state gets stored to
flash. E.g. the default value of 4 means that the state is saved every
24 hours (96 / 4).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After introducing persistent storage, it's useful for an app to check
if the node has been provisioned or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The rx_prio_queue k_fifo object has not been used for anything for a
really long time. The use for it was originally removed by the following
commit:
commit ad475d863a
Author: Szymon Janc <ext.szymon.janc@tieto.com>
Date: Fri Apr 22 11:36:04 2016 +0200
Bluetooth: Remove RX priority fiber
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The sequence number was acting as a stop-gap for missing persistent
storage. Now that we have the settings support in place it's no longer
needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The logic for restoring the sequence number was flawed in that it
would not always cause an incremented sequence write upon the
transmission of the first packet. The reason the code didn't work is
that it assumed the stored value was a multiple of SEQ_STORE_RATE,
however since the sequence number is stored in a deferred fashion
that's not always true.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We can implicitly trust locally originated messages, so there's no
need to burden the RPL with them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the remaining configuration server model
states (all of which are one byte values). The states are stored under
a single settings key bt/mesh/Cfg.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the heartbeat publication persistently. The
information is only stored as "publish indefinitely" or as "periodic
publishing disabled" since we can't know for how long the node is
powered off. The information is stored under the settings key
bt/mesh/HBPub.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the model publication information
persistently. The addresses are stored under the settings key
bt/mesh/s/<mod id>/pub for SIG models and bt/mesh/v/<mod id>/pub for
vendor models.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the subscribed group addresses for each model
persistently. The addresses are stored under the settings key
bt/mesh/s/<mod id>/sub for SIG models and bt/mesh/v/<mod id>/sub for
vendor models.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the bound App Keys for each model
persistently. The bindings are stored under the settings key
bt/mesh/s/<mod id>/bind for SIG models and bt/mesh/v/<mod id>/bind for
vendor models.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order not to have a Node Reset consume more stack than other
operations, also perform the related storage writes through the same
delayed work as all other storage updates.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having an RPL-specific storage timer, introduce a generic
one that'll eventually be used for all persistent storage.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To reduce stack consumption, and to avoid blocking the CPU during
network activity, prepare for a generic timer that can be used for
most (possibly all) mesh storage values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are valid use cases where the model layer must know the true
destination address. So far only the fact that it was one of the
addresses that the model subscribes to (its element's unicast
included) has been knowable.
Solve the issue by moving the destination address from the internal
net_rx context to the public bt_mesh_msg_ctx struct.
Fixes#7453
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are certain use cases where the application needs to be able to
explicitly set a specific identity address. This was previously
possible using the bt_storage API, however now that it's gone another
solution is needed.
This patch adds a ne bt_set_id_addr() API which the application can
use to set a specific identity address before calling bt_enable().
Fixes#7434
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually iterating all app keys and net keys, use the
bt_mesh_subnet_del() helper on all subnets. This will also clear any
app keys, and ensures that persistent storage is cleared as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Both the local sequence number as well as the Replay Protection List
(RPL) are states that may potentially change very often. In order not
to wear out the flash with these updates it makes sense to try to
avoid too frequent writes.
For the local sequence number a simple solution is not to write the
number on every increment. This patch introduces a new Kconfig option
to define after how many increments the sequence number gets written.
When the stack gets initialized it automatically adds the configured
number to the last stored one, thereby guaranteeing that the node
starts off with a number that's larger than the last used one.
The RPL is more problematic, since in principle it needs to be updated
every single time that we receive and process a message. Especially
security sentitive nodes will want this stored immediately to flash.
To give some use-case dependent flexibility, this patch introduces a
new Kconfig option to specify a timeout after which the RPL gets
written to flash.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are needed both for bt_mesh_provision() as well as persistent
storage-based network creation.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This variable is both redundant as well as problematic when it comes
to adding persistent-storage-based provisioning information, which
will not come through main.c or the bt_mesh_provision() API. Just
remove it and use bt_mesh.valid which serves the same purpose in
practice.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add APIs for storing core network values, such as Net and App Keys, IV
Index, Sequence number, RPL, etc.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for doing settings-based persistent storage for
the mesh network state. This patch only includes restoring some core
network state such as IV Index, Sequence number, Net Keys, App Keys
and the Replay Protection list. The remaining state, and actually
storing the state, is left for follow-up patches.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The sequence number is incremented from several different places in
the stack. The way it was done was potentially race condition prone,
and was also problematic from the perspective of updating the
sequence number in persistent storage. Create a dedicated helper for
incrementing the sequence number (solves the race) which can in later
patches be used to add the persistent storage support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This for loop runs inside an "if (!sub)" branch, so explicitly setting
sub to NULL in the loop is redundant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These app key and net key (subnet) helpers will soon be needed to be
called from the persistent storage code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable settings and increase the system workqueue size to deal with
the stack usage. This also makes it possible to test unpairing support
with the shell's 'clear' command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a bit of unnecessary space in the bt_keys struct. Re-design
some fields for a more compact format, which is particularly helpful
now that the struct gets stored as-is to flash through the settings
API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
