Send long-running tasks to a dedicated low-priority workqueue.
This shouldn't increase memory usage since by doing this, we get rid of the
ECC processing thread.
This should fix issues like #43811, since the system workqueue runs at a
cooperative priority, and the new dedicated one runs at a pre-emptible
priority.
Fixes#43811
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Renaming objects which had 2 in the name to indicate that
it is v2 specific. Once logging v1 has been removed such
suffixes are redundant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When the client receives att error rsp, but the error code
is an illegal value, such as 0, an exception will be triggered.
gatt_read_type --> gatt_read_type_rsp --> parse_characteristic
`switch (rsp->len) {` null address access.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Disable BT_ECC support in network core to reduce RAM usage.
ECC implementation can instead be supported in the Host
running in the application core.
This is also to keep hci_uart (nRF52 Series) and hci_rpmsg
(nRF53 Series) have the same support features. ECC is not
enabled in hci_uart sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix advertising failing to resume with BT_ADV_PERSIST set in
bt_hci_le_adv_set_terminated due to BT_ADV_ENABLED not getting
cleared before bt_le_adv_resume gets called
Signed-off-by: Troels Nilsson <trnn@demant.com>
Recent code change asserts on ECRED psm being consistent in
l2cap_ecred_conn_req. However, the values are compared between
endianness converted value and non-converted value, which fails on BE
archs.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This function retrieves TX sync information
(timestamp, offset, and sequence number)
from controller using HCI command HCI_LE_Read_ISO_TX_Sync.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
When performing a combined host and controller build, there is no point
in presenting the option to enable a given host feature if the
controller does not support it. This reduces the list of presented
features to enable/disable.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This reverts commit e11ff7df48.
This patch causes some PTS failure.
Another patch to address duplicate device will follow.
Signed-off-by: Azizah Ibrahim <azizah.ibrahim@nordicsemi.no>
When an L2CAP_CREDIT_BASED_RECONFIGURE_REQ packet is received with
invalid parameters, the recipient shall send an
L2CAP_CREDIT_BASED_RECONFIGURE_RSP PDU with a non-zero Result field
and not change any MTU and MPS values.
This fix incorrectly reconfiguring valid channels while responding with
0x003 (Reconfiguration failed - one or more Destination CIDs invalid)
result code.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
TSE18813 clarified IUT behavior and rejecting reconfiguration which
would result in MTU decrease is enough. There is no need to disconnect
L2CAP channel(s).
This was affecting L2CAP/ECFC/BI-03-C qualification test case
(TCRL 2022-2).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fixes sending corrupted (incomplete) packets over RTT. Additional
helper buffer has been added to ensure the complete packet before it
can be sent over RTT. Once the complete packet is collected it is sent
to the RTT control block in non-blocking manner. From now there will
be no situation that only part of the packet (e.g. header) is sent
which lead btmon to fail to parse the corrupted data.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes Bluetooth logs that were not sent over RTT.
Minor cleanup has been made to limit the number of ifdefs.
> ACL Data RX: Handle 0 flags 0x02 dlen 11 #1049 83.117000
ATT: Handle Value Indication (0x1d) len 6
Handle: 0x0003
Data: 0100ffff
= bt: bt_att: Unhandled ATT code 0x1d 83.117100
> HCI Event: Disconnect Complete (0x05) plen 4 #1050 84.247700
Status: Success (0x00)
Handle: 0
Reason: Remote User Terminated Connection (0x13)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename the BT_ISO_INTERVAL_MIN/MAX to
BT_ISO_SDU_INTERVAL_MIN/MAX to avoid confusing this
the the ISO interval which is different from the SDU
interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new parameters to bt_iso_chan_send:
sn: The packet sequence number which shall be incremeted
per SDU interval.
ts: An optional timestamp value used to synchronize SDUs.
The sequence number in the API uses a 32-bit value even though
the sequence number for the HCI command is 16-bit. This is to
properly handle wrapping of sequence numbers, which is much
easier to do with additional bits allocated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When bt_disable() was introduced, some of the global variables that
handle key aspects of Bluetooth were not converted to be also
re-initialized every time that the stack was disabled and the enabled
again. This meant that the FIFO and semaphore in the device structure
were not reset whenever the corresponding threads using them were shut
down and then restarted.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The current PHY is read only when automatic PHY
update procedure is enabled, 2M PHY is supported and
extended advertising is enabled and this is done after
application is notified about connection. This leads
to invalid connection info PHY data which always returns
1M PHY because when using extended advertising the connection
can be established on different PHY and host does not read
this value from the controller in most cases. In order to
have a current PHY value updated we need to read it in
connection complete event before the user application
is notified about connection.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The automatic elevation of security and retry of ATT requests interferes
with some tests that expect authentication failures.
Affecting GATT/CL/GAR/BI-42-C
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
EATT is not a requirement for the Multiple Variable Length Read
procedure, but previously one had to enable CONFIG_BT_EATT to enable
support for it.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Move the NULL-check for the iso_server to an earlier point.
There's no need to do anything on the device if no iso_server
has been registered.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ISO security implementation works by verifying
against the acl (bt_conn) sec_level field. The
bt_conn sec_level field is only available
if CONFIG_BT_SMP is enabled, so this commit
adds guards for all ISO security checks as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the required_sec_level is lower than the
conn->sec_level, the central will now initialize the
security procecure to ensure that the CIS is encrypted
properly.
The algorithm implemented is as follows:
1) Check security levels for each (acl, iso) pair
2) For those with insufficient security,
call bt_conn_set_security
3) For those with sufficient security, connect the CIS
4) Once the ISO from 2) has been encrypted, connect the
CIS for the specific ACL
The idea behind this was to implement similar support
for autonomous encryption as we have for L2CAP.
It is more complex for ISO as we are dealing with
an array of (acl, iso) pairs, meaning more can go
wrong.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add check for connection and server security
levels, and reject the CIS if the ACL security
level is too low.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The API is documented as being blocking. Making it nonblocking was an
unintentional API change.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The L2CAP channel ops->sent callback was required to call the
l2cap_chan_sdu_sent callback.
Previously, the only difference between the l2cap_chan_sdu_sent and
l2cap_chan_seg_sent callbacks was that l2cap_chan_sdu_sent called
ops->sent. This is no longer true and l2cap_chan_sdu_sent should always
be called when an SDU is sent.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The macro was remove for the GATT discover callbacks,
as only 2 out of 5 parameters for
BT_GATT_ATTRIBUTE were used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The request timer started on the first l2cap channel when doing an MTU
reconfiguration has to be stopped when the response is received. Else the
channel will get into a bad state.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Core v5.3, Vol 4, Part E, 7.8.38
Controller has the option to accept or reject when the same device
is added to RL.
If a remote device has been added to RL before, then local device
change it's advertsing address, and the remote device tries to pair
with the new address, we could end up trying to add the same data to RL.
If a remote device's public/static address is known, this patch deletes
the old entry from RL before adding it.
Signed-off-by: Azizah Ibrahim <azizah.ibrahim@nordicsemi.no>
Remove the deprecated BT_WHITELIST Kconfig option. Also,
remove a mention of the deleted bt_conn_create_auto_le API.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The L2CAP channel section is sorted lexicographically. Make sure
that ATT fixed channel will be placed as the last one to ensure
that SMP channel is properly initialized before bt_att_connected
tries to send security request.
Fixes#45820
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add a "subscribe" callback in the bt_gatt_subscribe params, and
deprecate the "write" callback.
The purpose of this is to be able to return the subscription
parameters in the callback. The write callback
- (in principle) returns write parameters
- in fact returns nothing - the pointer is set to NULL
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Modify the function slightly to take a different
argument, and add more debugging to the function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Ensure that we don't attempt to send any data to the
controller if `can_send` is not set, and return an
error code to the application instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Besides checking for the rx/tx pointer, we now also validate
the can_send and can_recv values to ensure that we do
not setup a useless data path.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Set the can_send to true and can_recv to false for broadcaster.
Set the can_send to false and can_recv to true for the sync
receiver.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of relying only on the `tx` and `rx` qos pointers,
we extract further information from the
bt_hci_evt_le_cis_established event to properly determine if we
can actually send or receive data.
This is useful to help determine which data paths to setup,
and whether to reject requests to send.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
