With removal of NFFS from Zaphyr it would be no longer possible to
test multifs with NFFS and LittleFS will be now used instead.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This patch is for suppress CI Kconfig issues caused
by temporary dead code in this test-suie.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
As multi-fs testsuite uses FS and NFFS it must be disabled
as NFFS was removed. Further thin test should be reworked to use
litlefs in place of NFFS.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
settings nffs targeted test were removed.
the file function settings suite was disabled as need some
rework in order to use litlefs.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Algorithm for freeing strdup buffers was only checking if argument
matches address within strdup buffer pool and was attempting freeing
even if format specifier was different than string.
Added fix where also format specifier is checked.
Extended logger test to verify correctness of function which searches
for string format specifiers within a string.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended test to pass address within strdup buffer but with
different format specifier (not string). That should not trigger
string buffer freeing. If it does system may collapse (e.g. cortex-m0
may use unaligned access).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test suite with test cases which performs stress test
of the logger in immediate mode. There are multiple threads continuesly
logging and being preempted. Test verifies that system does not
ends up in assert or fault.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended test by testcase for testing progressively erase feature.
native posix flash page size was set to 1 kB in order to by aligned
with native_posix partitions boundaries.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add filter "not CONFIG_LOG_IMMEDIATE" since the test relies on the
macros defined when CONFIG_LOG_IMMEDIATE not defined.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Extended flash simulator for posix architecture to read/write data
from a binary file on the host file system.
Further enable the flash simulator by default on native_posix(_64)
boards and updated the documentation accordingly.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Running the test under valgrind identified three places where an
uninitialized stack buffer was used as the source of data over which a
CRC was incidently calculated, causing an uninitialized value warning
in the CRC calculation. Zero out the source buffers before using them
as a data source.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some cleanup in tests code as after duplicates filtering
was introduced there is no need to interpret 0-length readout in
settings h_set handler
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
NVS back-end initialization should fetch size of the flash erase blocks
from the flash API instead of DT. This allows to work well when used
storage partition is not located in embedded memory.
NVS back-end sector multiplier configuration was set to 8K as
DT value for native posix targets
flash sector sizes is 1 B, while its flash driver supports 8k.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Stops leaking very long source paths in build directories; makes them
deterministic. Finishes what was started in commit b4282bf72d, see
rationale and code reviews there.
See also CMake issue https://gitlab.kitware.com/cmake/cmake/issues/19475
for more details.
Use the opportunity to remove the most obvious duplication.
Test with: sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit fixes the FCB delete test after PR #19541.
Now the entity callback is not called on deleted element.
Issue: #19963
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
A few settings module variables were not initialized before used.
Normally these variable are initialized in the back-end
initialization call which couldn't be done in affected unit tests.
This path initialize these variable via assignments in test code.
fixes#19722
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Stops leaking very long source paths in build directories; makes them
deterministic.
Besides satisfying a CMake requirement, the new empty_file.c provide a
clue that the actual test code is not in the directory of the test case.
See https://github.com/zephyrproject-rtos/hal_nordic/pull/6 and
https://gitlab.kitware.com/cmake/cmake/issues/19475 for more details.
- Test with a simple:
sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/functional/
- Before:
CMakeFiles
├── app.dir
│ ├── HOME
│ │ └── JOHN
│ │ └── zephyrproject
│ │ └── zephyr
│ │ └── tests
│ │ └── subsys
│ │ └── settings
│ │ └── functional
│ │ └── src
│ │ └── settings_basic_test.c.obj
- After:
func_test_bindir/
├── CMakeFiles
│ └── settings_func_test.dir
│ └── settings_basic_test.c.obj
│
├── libsettings_func_test.a
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Application board.overlay files tend to be paired with
boards/board.conf files that extend the functionality of a board.
Move the overlay files to the same location as the config files that
they work with.
A few overlay files that are paired with a prj_board.conf file in the
application root directory are left in place.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Mostly build tests now, will be extended to verify CTF output once we
have this feature in sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Integrated Settings module tests with the NVS backend. The batch of
tests is shared with other backends.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Changed the name of functional tests for NVS and FCB in the test
configuration file to avoid duplication with other test suites.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Limited the scope of helper functions that are used in the common test
source. Now it is easier to identify which functions are intended to be
used in the test suite.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
As it stands, this option leads to conflict between Newlib and POSIX
headers. (Which needs to be resolved separately.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit allows loading data from settings permanent storage
directly to the given callback function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
